NANO_FIBER_DEMO_1MM

NANO_FIBER_DEMO_1MM Datasheet

NanEye with Optical Optional Assembly

Part	Datasheet
NANO_FIBER_DEMO_1MM	NANO_FIBER_DEMO_1MM (pdf)

PDF Datasheet Preview
Evaluation set with Fiber Illumination Evaluation set with Fiber Illumination Modifications and Updates Version Date 09/06/15 17/03/17 Modifications Updated Document Updated table 1 and section Author Baptista Date 17/03/17 Version Page 2/21 Evaluation set with Fiber Illumination Table of Contents 1 2 Fiber optic light NanEye with Optical Optional Assembly NanEye Stereo with Optical Fiber 3 Mechanical Dimensions of Camera NanEye with Lens and Cable Soldered Dipped NanEye with Lens and Cable Soldered Dipped 90º Not NanEye 4 Optic 5 Evaluation Kit How to Install Awaiba How to Start Awaiba Viewer How to Use Awaiba Viewer How to Debug 6 Package Nano Fiber Demo Kit 7 Index of Tables Table 1 NanEye Fiber Demo Kit Index of Figures Figure 1 NanEye evaluation set overview block Figure 2 NanEye Fiber Demo Figure 3 Distal tip of the cable with the light source and the Figure 4 Picture of NanEye together with POF illumination Figure 5 Stereo Camera with the light source Figure 6 Measurements of the NANEYE module, Cable length may be adjusted to different lengths...............................9 Figure 7 Measurements of the NANEYE module, Cable length may be adjusted to different lengths.............................10 Figure 8 Measurements of the NanEye Stereo module in Figure 9 NanEye CTF Figure 10 Starting the Date 17/03/17 Version Page 3/21 Evaluation set with Fiber Illumination NanEye is a tiny camera module which consists of a CMOS image sensor with a footprint size of 1mm x 1mm and, optionally, an adapted miniature optics. The device is mounted on a flat ribbon cable measuring up to 2m in length. Other cable lengths measuring up to 3m are possible upon request. The Evaluation set consists of the NanEye base station which receives the NanEye sensors LVDS bit serial data stream and translates it to a USBII protocol that will interface over a standard USBII connection to a PC. The supplied viewer software controls the NanEye camera, and displays the video images. The fiber light source provides illumination over a 1mm diameter POF fiber to the tip of the camera Figure 1 NanEye evaluation set overview block diagram Date 17/03/17 Version Page 4/21 Evaluation set with Fiber Illumination 2 Fiber optic light source Specifications PC Interface Protocol Programmable Unit Power Supply Dimensions Sensors USB2 FPGA Xilinx Spartan 3E Via USB 5V Width Hight Length 1 x NanEye 2D 16 cm 6,1 cm 20 cm 1 x NanEye Stereo Table 1 NanEye Fiber Demo Kit Specifications Figure 2 NanEye Fiber Demo Kit

PDF Datasheet Preview

Evaluation set with Fiber Illumination

Evaluation set with Fiber Illumination

Modifications and Updates

Version

Date 09/06/15 17/03/17

Modifications Updated Document Updated table 1 and section

Author Baptista

Date 17/03/17

Version

Page 2/21

Evaluation set with Fiber Illumination

Table of Contents
1 2 Fiber optic light

NanEye with Optical Optional Assembly

NanEye Stereo with Optical Fiber 3 Mechanical Dimensions of Camera

NanEye with Lens and Cable Soldered Dipped NanEye with Lens and Cable Soldered Dipped 90º Not NanEye 4 Optic 5 Evaluation Kit How to Install Awaiba How to Start Awaiba Viewer How to Use Awaiba Viewer How to Debug 6 Package Nano Fiber Demo Kit 7

Index of Tables

Table 1 NanEye Fiber Demo Kit

Index of Figures

Figure 1 NanEye evaluation set overview block Figure 2 NanEye Fiber Demo Figure 3 Distal tip of the cable with the light source and the Figure 4 Picture of NanEye together with POF illumination Figure 5 Stereo Camera with the light source Figure 6 Measurements of the NANEYE module, Cable length may be adjusted to different lengths...............................9 Figure 7 Measurements of the NANEYE module, Cable length may be adjusted to different lengths.............................10 Figure 8 Measurements of the NanEye Stereo module in Figure 9 NanEye CTF Figure 10 Starting the

Date 17/03/17

Version

Page 3/21

Evaluation set with Fiber Illumination

NanEye is a tiny camera module which consists of a CMOS image sensor with a footprint size of 1mm x 1mm and, optionally, an adapted miniature optics. The device is mounted on a flat ribbon cable measuring up to 2m in length. Other cable lengths measuring up to 3m are possible upon request.

The Evaluation set consists of the NanEye base station which receives the NanEye sensors LVDS bit serial data stream and translates it to a USBII protocol that will interface over a standard USBII connection to a PC.

The supplied viewer software controls the NanEye camera, and displays the video images.

The fiber light source provides illumination over a 1mm diameter POF fiber to the tip of the camera

Figure 1 NanEye evaluation set overview block diagram

Date 17/03/17

Version

Page 4/21

Evaluation set with Fiber Illumination
2 Fiber optic light source

Specifications PC Interface Protocol Programmable Unit Power Supply Dimensions

Sensors

USB2 FPGA Xilinx Spartan 3E Via USB 5V Width Hight Length 1 x NanEye 2D
16 cm 6,1 cm 20 cm
1 x NanEye Stereo

Table 1 NanEye Fiber Demo Kit Specifications

Figure 2 NanEye Fiber Demo Kit

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NANO_FIBER_DEMO_1MM Datasheet file may be downloaded here without warranties.

Datasheet ID: NANO_FIBER_DEMO_1MM 519794