AS3722
Part | Datasheet |
---|---|
![]() |
AS3722-BCTT-11 (pdf) |
Related Parts | Information |
---|---|
![]() |
AS3722-BCTT-10 |
![]() |
AS3722-BCTT-13 |
![]() |
AS3722-CT-00_EK_ST A |
![]() |
AS3722-BCTT-09 |
PDF Datasheet Preview |
---|
AS3722 Multi-Phase DCDC Controller PMIC The AS3722 is a compact System PMU supporting up to 20 high current rails. The device offers advanced power management functions. All necessary ICs and peripherals in a battery powered mobile device are supplied by the AS3722. It features 4 DCDC buck converters as well as 11 low noise LDOs. The different regulated supply voltages are programmable via the serial control interface. 3-4MHz operation with 0.47uH coils is reducing cost and PCB space. AS3722 further features 3 DCDC buck controller which are ideal to support processor currents ranging from 5A up to 32A depending on the used power stages. The multi-phase topology operating on 3MHz ensures fast load transient responses and reduces the footprint for external components. The single supply voltage may vary from 2.7V to 5.5V. Ordering Information and Content Guide appear at end of datasheet. Figure 1 Added Value of Using AS3722 Key Benefits & Features The benefits and features of AS3722, Multi-Phase DCDC Controller PMIC are listed below: • Compact design due to small coils for IO and memory voltage generation • High current generation with external power stages to minimize PMIC power dissipation • Multiple independent voltage rails for general purpose IO supplies • Ultra low-power oscillator and no external caps needed • 4 DCDC step down regulators 3-4MHz • Output 0.6V-3.35V 1x5A, 1x2A, 2x1.5A • 3 DCDC step down controller • DVM 0.6V-1.5V 1x6A, 1x12A, 1x24A • 11 universal LDOs • 9x universal IO range 0.8-3.3V 0.3A • 1x low output range 0.6-1.5V 0.3A • 1x extended input range 0.8-1.2V 0.3A • RTC • 1uA total power consumption • Programmable alarm • Auto wake-up, repeating alarms • 32kHz output to peripherals ams Datasheet [v1-01] 2015-Sep-07 Page 1 Document Feedback AS3722 − General Description • Safe supervision in HW which works also without a processor • Supervisor with interrupt generation and selectable warning levels • Automatic battery monitoring • Automatic temperature monitoring • Automatic over-current monitoring • Power supply supervision for DCDC • Flexible multi-purpose IOs for general control tasks • General Purpose IOs • ADC input • Wake-up/stand-by input • PWM input/output • Low battery and power good status • Enables the processor to check the actual system state in detail • ADC with internal and external sources • Flexible and fast adaptation to different processors/applications • Power saving control according to the processor needs • Self-contained start-up and control for single and multi-cell battery applications. Safety shutdown feature • OTP programmable Boot and Power-down sequence • Stand-by function with programmable sequence and voltages • Control Interface • I2C/SPI control lines with watchdog • ONKEY with 4/8s emergency shut-down • POR with RESET I/O • 5V pre-regulator enable • Dedicated packages for specific applications. Optimization for PCB cost or size • Package • 124-pin CTBGA 8x8mm , 0.5mm pitch • 108-pin WL-CSP 4.8x3.6mm , 0.4mm pitch The device is suitable for • Mobile Phones • Tablet PCs • NetBooks • Portable Media Players • Portable Navigation Devices • Mobile Internet Devices Page 2 Document Feedback ams Datasheet [v1-01] 2015-Sep-07 VIN_LDO0 LDO0 VIN_LDO1_6 LDO1 LDO6 VIN_LDO3_LV VIN_LDO3_4 LDO3 VIN_LDO3_SW VIN_LDO3_4 LDO4 VIN_LDO2_5_7 LDO2 LDO5 LDO7 VIN_LDO9_10 LDO9 LDO10 VIN_LDO11 LDO11 AS3722 − General Description Figure 2 AS3722 Block Diagram CTBGA max. 2 sub die 2 phases max. 4 sub dies 8 phases max. 1 sub die 2 phases Block Diagram The functional blocks of this device are shown below: Block Diagram Shows the main function blocks of the AS3722 including basic external components. AS3722 − Ordering & Contact Information Ordering & Contact Information Figure 237 Ordering Information Ordering Code Marking OTP programming Delivery Form Package AS3722-BCTR-ES AS3722-BCTT-00 AS3722-BCTT-xx AS3722-BWLW-ES AS3722-BWLT-00 AS3722-BWLT-xx T1V2-ES T1V2-00 T1V2-xx T1V2-ES T1V2-00 T1V2-xx sequence programmable on request standard programming, no sequence other customer specified programming sequence programmable on request standard programming, no sequence other customer specified programming Tray Tape & Reel Tape & Reel Waffle Pack Tape & Reel Tape & Reel 124-pin CTBGA 0.5mm pitch 124-pin CTBGA 0.5mm pitch 124-pin CTBGA 0.5mm pitch 108-pin WL-CSP 0.4mm pitch 108-pin WL-CSP 0.4mm pitch 108-pin WL-CSP 0.4mm pitch Ordering Information Shows the ordering information for the different product versions Buy our products or get free samples online at Technical Support is available at Provide feedback about this document at For further information and requests, e-mail us at For sales offices, distributors and representatives, please visit: Headquarters ams AG Tobelbaderstrasse 30 8141 Unterpremstaetten Austria, Europe Tel +43 0 3136 500 0 Website: ams Datasheet [v1-01] 2015-Sep-07 Page 191 Document Feedback AS3722 − RoHS Compliant & ams Green Statement RoHS Compliant & ams Green Statement RoHS The term RoHS compliant means that ams AG products fully comply with current RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories, including the requirement that lead not exceed by weight in homogeneous materials. Where designed to be soldered at high temperatures, RoHS compliant products are suitable for use in specified lead-free processes. ams Green RoHS compliant and no Sb/Br ams Green defines that in addition to RoHS compliance, our products are free of Bromine Br and Antimony Sb based flame retardants Br or Sb do not exceed by weight in homogeneous material . Important Information The information provided in this statement represents ams AG knowledge and belief as of the date that it is provided. ams AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams AG and ams AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Page 192 Document Feedback ams Datasheet [v1-01] 2015-Sep-07 AS3722 − Copyrights & Disclaimer Copyrights & Disclaimer Copyright ams AG, Tobelbader Strasse 30, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Devices sold by ams AG are covered by the warranty and patent indemnification provisions appearing in its General Terms of Trade. ams AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by ams AG for each application. This product is provided by ams AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services. ams Datasheet [v1-01] 2015-Sep-07 Page 193 Document Feedback Document Status AS3722 − Document Status Document Status Product Status Definition Product Preview Pre-Development Information in this datasheet is based on product ideas in the planning phase of development. All specifications are design goals without any warranty and are subject to change without notice Preliminary Datasheet Pre-Production Information in this datasheet is based on products in the design, validation or qualification phase of development. The performance and parameters shown in this document are preliminary without any warranty and are subject to change without notice Datasheet Production Information in this datasheet is based on products in ramp-up to full production or full production which conform to specifications in accordance with the terms of ams AG standard warranty as given in the General Terms of Trade Datasheet discontinued Discontinued Information in this datasheet is based on products which conform to specifications in accordance with the terms of ams AG standard warranty as given in the General Terms of Trade, but these products have been superseded and should not be used for new designs Page 194 Document Feedback ams Datasheet [v1-01] 2015-Sep-07 Removed Confidential Updated Figure 6 Updated Figure 7 Updated Figure 31 Updated Figure 33 Updated text above Figure 46 Updated Figure 49 Updated Normal Startup Updated Figure 50 Updated Figure 51 Updated Figure 52 Updated Figure 56 Updated OC_PG_SD0 Output Updated Figure 106 Updated Figure 164 7 14 38 39 46 49 50 51 52 53 58 66 114 148 ams Datasheet [v1-01] 2015-Sep-07 Page 198 Document Feedback ams Datasheet [v1-01] 2015-Sep-07 |
More datasheets: AP1702BWG-7 | AP1703FWG-7 | AP1701FWG-7 | AP1702DWG-7 | AP1701DWG-7 | AP1704CWG-7 | FIT0489-B | 2046 | AS3722-BCTT-10 | AS3722-BCTT-13 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS3722-BCTT-11 Datasheet file may be downloaded here without warranties.