AS1351_EK_PB
AS1351_EK_PB Datasheet
AS1351 Programming Board Application Note
| Part | Datasheet |
|---|---|
AS1351_EK_PB |
AS1351_EK_PB (pdf) |
| PDF Datasheet Preview |
|---|
| AS1351 Programming Board Application Note austriamicrosystems AS1351 Programming Board Application Note AS1351 Programming Board Application Note Switch Description austriamicrosystems Figure 1 Board description Table 1 Switch description Mark Switch Description Information ON/OFF ON/OFF switch Board powered OFF Board powered ON power supply Voltage switch VCC of the IC is set to 3.3V VCC of the IC is set to 5V VOUT1 Programming voltage value 1 Rotary switch for programming VOUT1 of the IC. Please see table for values. VOUT2 Programming voltage value 2 Rotary switch for programming VOUT2 of the IC. Please see table for values. START Button If hit the IC will be programmed with the chosen values for VOUT1-2 Feedback and Socket Description Table 2 Feedback and Socket Description Mark Name Description active ON if Supply is active. If ON after programming sequence, the IC was successfully programmed. Blinks if an already programmed IC was placed in the socket. error If ON after programming sequence, the programming of the IC failed. Socket An AS1351 can be placed here, either to be programmed or to be evaluated. Input/Output Description Table 3 Input/Output Description Mark Connector Description DC-Jack Supply Voltage Connector 12V / 900mA K-L GND Ground Pins |
| More datasheets: H-300-2-560 | U90-B305-4081-100 | CY7C0241E-15AXC | CY7C0241E-25AXC | CY7C0241E-15AXI | CY7C0241E-15AXCT | CY7C0241E-25AXCT | 3354 | 1V00 | 1U00 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS1351_EK_PB Datasheet file may be downloaded here without warranties.