CKY462A7

CKY462A7 Datasheet

CKY462A7

Part	Datasheet
CKY462A7	CKY462A7 (pdf)

PDF Datasheet Preview
CKY462A7 Bench press for closing Rocard covers End cap PCMCIA > Manual > CKY462A7 Order no. CKY462A7 Purpose The CKY462A7 manual tool kit is designed to assemble Rocard card kits End cap . Tool description The tool kit consists out of a right and left a and two The tool-kit is based on a manual bench press. The press-block is locked to the ram of the press. The table of the press is equipped with a guiding table which allows linear movement of the position-plate by means of the slidingblocks. Herewith, the operator can position the product card kit with antenna extension perfectly under the press-block. By lowering the press-block, at which the plastic right and left press parts are attached, the product is pressed together and formed as final product. Then the operator can move the position plate again in the front position so the final product can be removed easily from the position-plate. General specifications Assembling tool weight +/- 13 kg Safety and ergonomics Concerning the stability of the tool it is recommended to lock the tool on the working bench. Only well trained people should apply or maintain this tool. Apply the tool in a clean and dry environment. Power connections No pneumatic or electrical power required. FCI Electronics Issued 11/05/07

PDF Datasheet Preview

CKY462A7

Bench press for closing Rocard covers End cap

PCMCIA > Manual > CKY462A7 Order no. CKY462A7

Purpose

The CKY462A7 manual tool kit is designed to assemble Rocard card kits End cap .

Tool description

The tool kit consists out of a right and left a and two The tool-kit is based on a manual bench press. The press-block is locked to the ram of the press. The table of the press is equipped with a guiding table which allows linear movement of the position-plate by means of the slidingblocks. Herewith, the operator can position the product card kit with antenna extension perfectly under the press-block. By lowering the press-block, at which the plastic right and left press parts are attached, the product is pressed together and formed as final product. Then the operator can move the position plate again in the front position so the final product can be removed easily from the position-plate.

General specifications

Assembling tool weight +/- 13 kg

Safety and ergonomics

Concerning the stability of the tool it is recommended to lock the tool on the working bench. Only well trained people should apply or maintain this tool. Apply the tool in a clean and dry environment.

Power connections

No pneumatic or electrical power required.

FCI Electronics Issued 11/05/07

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CKY462A7 Datasheet file may be downloaded here without warranties.

Datasheet ID: CKY462A7 635094