SWC-1.4-220

SWC-1.4-220 Datasheet


SW_-3.0-47 SWC-3.0-68 SWC-3.0-100 SW_-2.0-150 SW_-1.4-220 SW_-1.4-220 SW_-0.9-330 SW_-0.9-330 SWC-0.64-470 SW_-0.85-680

Part Datasheet
SWC-1.4-220 SWC-1.4-220 SWC-1.4-220 (pdf)
Related Parts Information
SWC-2.0-470 SWC-2.0-470 SWC-2.0-470
SWC-3.0-220 SWC-3.0-220 SWC-3.0-220
SWC-0.95-1000 SWC-0.95-1000 SWC-0.95-1000
SWB-0.62-1500 SWB-0.62-1500 SWB-0.62-1500
SWC-0.90-330 SWC-0.90-330 SWC-0.90-330
SWS-0.9-330 SWS-0.9-330 SWS-0.9-330
SWS-0.85-680 SWS-0.85-680 SWS-0.85-680
SWS-2.0-150 SWS-2.0-150 SWS-2.0-150
SWC-1.50-250 SWC-1.50-250 SWC-1.50-250
SWC-3.0-330 SWC-3.0-330 SWC-3.0-330
SWT-3.0-47 SWT-3.0-47 SWT-3.0-47
SWC-3.0-47 SWC-3.0-47 SWC-3.0-47
SWS-1.4-220 SWS-1.4-220 SWS-1.4-220
SWS-3.0-47 SWS-3.0-47 SWS-3.0-47
SWC-1.3-680 SWC-1.3-680 SWC-1.3-680
SWV-0.9-330 SWV-0.9-330 SWV-0.9-330
SWS6-1.4-220 SWS6-1.4-220 SWS6-1.4-220
SWV-1.4-220 SWV-1.4-220 SWV-1.4-220
SWT-0.85-680 SWT-0.85-680 SWT-0.85-680
SWC-3.0-100 SWC-3.0-100 SWC-3.0-100
SWT-1.4-220 SWT-1.4-220 SWT-1.4-220
SWT-0.90-330 SWT-0.90-330 SWT-0.90-330
SWV-0.85-680 SWV-0.85-680 SWV-0.85-680
SWS-0.90-330 SWS-0.90-330 SWS-0.90-330
SWB-0.42-2200 SWB-0.42-2200 SWB-0.42-2200
SWF-0.90-330 SWF-0.90-330 SWF-0.90-330
SWC-0.64-470 SWC-0.64-470 SWC-0.64-470
SWC-3.0-150 SWC-3.0-150 SWC-3.0-150
SWC-3.0-68 SWC-3.0-68 SWC-3.0-68
SWF-0.85-680 SWF-0.85-680 SWF-0.85-680
SWC-2.0-150 SWC-2.0-150 SWC-2.0-150
SWF-1.4-220 SWF-1.4-220 SWF-1.4-220
PDF Datasheet Preview
SW Series
• Inductors for National's 50kHz Simple SwitcherTM

Compatible with National Semiconductor's Simple SwitcherTM Part Number's LM2574, LM2475 and LM2576
• High energy storage with minimum saturation
• High stability from no load to full load
• Available in both SMD and TH versions
• Manufactured in ISO-9001 approved facility
• Operating temperature range -40°C to +125°C

Electrical Specifications at 25°C ambient

SW_-3.0-47 SWC-3.0-68 SWC-3.0-100 SW_-2.0-150 SW_-1.4-220 SW_-1.4-220 SW_-0.9-330 SW_-0.9-330 SWC-0.64-470 SW_-0.85-680

Rated Current

LN µH

LO µH ±20%

ETOP V-µSec

DCR Ohms

Package

Typical * No DC Load

Max.

Max.
"C" "S" "T" "B" "F" "V"

SWC-3.0-150

SWC-3.0-220

SWC-3.0-330

SWC-2.0-470

SWC-1.3-680

SWC-0.95-1000
1000

SWB-0.62-1500
1500
1150

SWB-0.42-2200
2200
1730
Ordering Key
1 Inductance will be typical for theDIC and ETOP values listed above.
2 No load Inductance will be measured 20kHz, 10mVrms.
3 Simple SwitcherTMis a trademark of National Semiconductor Corporation.

SW C - - 47

Inductance Value in µH Current Rating Amps Mounting Style - Specify the appropriate suffix

C = Clip Mount S = Surface Mount S5 or S6 T = Low Profile TH Mount B = Base Mount F = Flat Encapsulated V = Vertical Encapsulated Basic Series Designation

AMGIS, LLC * 10830 Kinghurst Dr. Houston, TX 77099

Phone 832-775-1319 * Fax 281-933-9067* email:

Toll Free 877-762-6447 *

Mounting Styles
• SW Series
• Low Cost Toroidal Inductors

Type "B" - Vertical Mount

Type "V" - Vertical Mount - Size 2

AMGIS

SWB-XX-XXX Date Code

Schematic

Suggested Pad Layout

AMGIS

SWV-XX-XXX Date Code

Type "F" - Flat Mount - Size 2

AMGIS

SWF-XX-XXX Date Code

Type SWT -Through Hole Mount

AMGIS

Date Code SWT-xxx-xx

Suggested Pad Layout

Top Side View

Suggested Pad Layout

Top Side View

Suggested Pad Layout

Top Side View

Type SWS - Surface Mount

AMGIS Date Code SWS-xxx-xx

Pad Width

S1 - S5 S6

Suggested Pad Layout

D Surface Coplanarity will be

Schematic

Mounting Size Style Code

SMD S6

Dimensions - Inches mm
More datasheets: AT93C66A-10TI-2.7-T | AT93C66A-10SI-2.7-T | 0553-0013-DC-F | SWC-2.0-470 | SWC-3.0-220 | SWC-0.95-1000 | SWB-0.62-1500 | SWC-0.90-330 | SWS-0.9-330 | SWS-0.85-680


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SWC-1.4-220 Datasheet file may be downloaded here without warranties.

Datasheet ID: SWC-1.4-220 515986