AOZ1360AIL_2

AOZ1360AIL_2 Datasheet

AOZ1360

Part	Datasheet
AOZ1360AIL_2	AOZ1360AIL_2 (pdf)

Related Parts	Information
AOZ1360AIL_3	AOZ1360AIL_3

PDF Datasheet Preview
AOZ1360 28V Programmable Current-Limited Load Switch The AOZ1360 is a member of Alpha and Omega Semiconductor’s high-side load switch family intended for applications that require circuit protection. The device operates from a source voltage between 5.5V and 28V. The internal current limiting circuit protects the input supply voltage from large current load. The current limit can be set with an external resistor. The AOZ1360 provides thermal protection function that limits excessive power dissipation. The device employs internal soft-start circuitry to control in-rush current due to highly capacitive loads associated with hot-plug events. It features low quiescent current of 220 µA and the supply current reduces to less than 1 µA at shutdown. The AOZ1360 is available in either an SO-8 or a DFN-10 4 mm x 4 mm package which can operate over a -40C to +85C temperature range. maximum on resistance Programmable current limit 5.5V to 28V operating input voltage Low quiescent current Under-voltage lockout Thermal shutdown protection 2.5kV ESD rating Available in SO-8 or DFN-10 package Notebook PCs Hot swap supplies C1 1uF OFF ON C3 1nF AOZ1360 VOUT C2 1uF R1 84.5k Page 1 of 16 AOZ1360 Ordering Information Part Number AOZ1360AIL AOZ1360DIL Package SO-8 DFN-10 4x4 Temperature Range -40 °C to +85 °C AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit for additional information. Pin Configuration Environmental Green Product IN 1 IN 2 GND 3 SS 4 8 OUT 7 OUT 6 SET 5 EN SO-8 Top View IN 1 IN 2 NC 3 GND 4 SS 5 10 OUT 9 OUT 7 SET DFN-10 Top View Pin Description Pin Name IN GND SS EN SET NC OUT Pin Number SO-8 DFN 4x4 10L Pin Function P-channel MOSFET source. Connect a 1 µF capacitor from IN to GND. Ground. Soft-Start Pin. Connect a capacitor from SS to GND to set the soft-start time. Connect SS to IN to set to the default soft-start time of 100us. Enable Input. Current Limit Set Pin. Connect a resistor from SET to GND to set the switch current limit. No Connect 9, 10 P-channel MOSFET Drain. Connect a capacitor with µF or above from OUT to GND. Page 2 of 16 Functional Block Diagram AOZ1360

PDF Datasheet Preview

AOZ1360
28V Programmable Current-Limited Load Switch

The AOZ1360 is a member of Alpha and Omega Semiconductor’s high-side load switch family intended for applications that require circuit protection. The device operates from a source voltage between 5.5V and 28V. The internal current limiting circuit protects the input supply voltage from large current load. The current limit can be set with an external resistor. The AOZ1360 provides thermal protection function that limits excessive power dissipation. The device employs internal soft-start circuitry to control in-rush current due to highly capacitive loads associated with hot-plug events. It features low quiescent current of 220 µA and the supply current reduces to less than 1 µA at shutdown.

The AOZ1360 is available in either an SO-8 or a DFN-10 4 mm x 4 mm package which can operate over a -40C to +85C temperature range.
maximum on resistance Programmable current limit 5.5V to 28V operating input voltage Low quiescent current Under-voltage lockout Thermal shutdown protection 2.5kV ESD rating Available in SO-8 or DFN-10 package

Notebook PCs Hot swap supplies

C1 1uF

OFF ON

C3 1nF

AOZ1360

VOUT

C2 1uF

R1 84.5k

Page 1 of 16

AOZ1360
Ordering Information

Part Number AOZ1360AIL AOZ1360DIL

Package SO-8

DFN-10 4x4

Temperature Range -40 °C to +85 °C

AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit for additional information.

Pin Configuration

Environmental Green Product

IN 1 IN 2 GND 3 SS 4
8 OUT 7 OUT 6 SET 5 EN

SO-8

Top View

IN 1 IN 2 NC 3 GND 4 SS 5
10 OUT
9 OUT
7 SET

DFN-10

Top View

Pin Description

Pin Name IN

GND SS

EN SET

NC OUT

Pin Number

SO-8

DFN 4x4 10L

Pin Function

P-channel MOSFET source. Connect a 1 µF capacitor from IN to GND.

Ground.

Soft-Start Pin. Connect a capacitor from SS to GND to set the soft-start time.

Connect SS to IN to set to the default soft-start time of 100us.

Enable Input.

Current Limit Set Pin. Connect a resistor from SET to GND to set the switch
current limit.

No Connect
9, 10

P-channel MOSFET Drain. Connect a capacitor with µF or above from OUT
to GND.

Page 2 of 16

Functional Block Diagram

AOZ1360

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AOZ1360AIL_2 Datasheet file may be downloaded here without warranties.

Datasheet ID: AOZ1360AIL_2 516318