A8298SESTR-T

A8298SESTR-T Datasheet

Allegro | Product | A8298 Single LNB Supply and Control Voltage Regulator

Part	Datasheet
A8298SESTR-T	A8298SESTR-T (pdf)

PDF Datasheet Preview
Allegro \| Product \| A8298 Single LNB Supply and Control Voltage Regulator Home / Products / Part Numbers / A8298 A8298 Single LNB Supply and Control Voltage Regulator Contact Allegro Marketing for datasheet. • Integrated boost MOSFET, current sensing, and compensation • Stable with low-profile ceramic boost capacitors • Higher voltage ratings support increased surge • Supplies up to 550 mA continuously • Supplies up to 700 mA for reconfiguration • Adjustable LNB output current limit from 300 to 800 mA • Boost peak current limit scales with LNB current limit setting • 8 programmable LNB output voltage DAC levels • LNB overcurrent limiter with shutdown timer • Tracking boost converter minimizes power dissipation • LNB transition times configurable by external capacitor • Push-pull LNB output stage maintains V and V transition times, even with highly capacitive loads • Built-in 22 kHz tone oscillator facilitates DiSEqC tone encoding, even at no-load • Tone generation does not require additional external components • Diagnostic features PNG, TDET • Dynamic tone detect amplitude and frequency thresholds • Extensive protection features UVLO, OCP, TSD, CPOK • 2-wire I2C-compatible interface Intended for analog and digital satellite receivers, this single low noise block converter regulator LNBR is a monolithic linear and switching voltage regulator, specifically designed to provide the power and the interface signals to an LNB down converter via coaxial cable. The A8298 requires few external components, with the boost switch and compensation circuitry integrated inside of the device. A high switching frequency is chosen to minimize the size of the passive filtering components, further assisting in cost reduction. The high levels of component integration ensure extremely low noise and ripple figures. The A8298 has been designed for high efficiency, utilizing the advanced BCD process. The integrated boost switch has been optimized to minimize both switching and static losses. To further enhance efficiency, the voltage drop across the tracking regulator has been minimized. For DiSEqC communications, a tone control pin is provided to gate the internally-generated 22 kHz tone on-and-off. A comprehensive set of fault registers are provided, which comply with all the common standards, including overcurrent, thermal shutdown, undervoltage, and power not good. The device uses a 2-wire bidirectional serial interface, compatible with the I2C standard, that operates up to 400 kHz. The A8298 is supplied in a lead Pb free package. Functional Block Diagram Complete Part Numbers Package Type RoHS Part Composition/ Compliant RoHS Data Temperature Comments Samples/Demo A8298SESTR-T 20-lead QFN view data -20 °C to 85 °C new Contact Local Sales Representative or check distributor stock APEK8298SES-01-T DEMO BOARD No -20 °C to 85 °C new Contact Local Sales Representative Distributor Stock Check Stock Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system. 10/4/2011 Allegro \| Product \| A8298 Single LNB Supply and Control Voltage Regulator Copyright 2011 Allegro MicroSystems, Inc. • 115 Northeast Cutoff, Worcester, MA 01606 USA • Phone • Fax: 10/4/2011

PDF Datasheet Preview

Allegro | Product | A8298 Single LNB Supply and Control Voltage Regulator

Home / Products / Part Numbers / A8298

A8298 Single LNB Supply and Control Voltage Regulator

Contact Allegro Marketing for datasheet.
• Integrated boost MOSFET, current sensing, and compensation
• Stable with low-profile ceramic boost capacitors
• Higher voltage ratings support increased surge
• Supplies up to 550 mA continuously
• Supplies up to 700 mA for reconfiguration
• Adjustable LNB output current limit from 300 to 800 mA
• Boost peak current limit scales with LNB current limit setting
• 8 programmable LNB output voltage DAC levels
• LNB overcurrent limiter with shutdown timer
• Tracking boost converter minimizes power dissipation
• LNB transition times configurable by external capacitor
• Push-pull LNB output stage maintains V and V transition times, even with highly capacitive loads
• Built-in 22 kHz tone oscillator facilitates DiSEqC tone encoding, even at no-load
• Tone generation does not require additional external components
• Diagnostic features PNG, TDET
• Dynamic tone detect amplitude and frequency thresholds
• Extensive protection features UVLO, OCP, TSD, CPOK
• 2-wire I2C-compatible interface

Intended for analog and digital satellite receivers, this single low noise block converter regulator LNBR is a monolithic linear and switching voltage regulator, specifically designed to provide the power and the interface signals to an LNB down converter via coaxial cable. The A8298 requires few external components, with the boost switch and compensation circuitry integrated inside of the device. A high switching frequency is chosen to minimize the size of the passive filtering components, further assisting in cost reduction. The high levels of component integration ensure extremely low noise and ripple figures.

The A8298 has been designed for high efficiency, utilizing the advanced BCD process. The integrated boost switch has been optimized to minimize both switching and static losses. To further enhance efficiency, the voltage drop across the tracking regulator has been minimized.

For DiSEqC communications, a tone control pin is provided to gate the internally-generated 22 kHz tone on-and-off.

A comprehensive set of fault registers are provided, which comply with all the common standards, including overcurrent, thermal shutdown, undervoltage, and power not good.

The device uses a 2-wire bidirectional serial interface, compatible with the I2C standard, that operates up to 400 kHz.

The A8298 is supplied in a lead Pb free package.

Functional Block Diagram

Complete Part Numbers

Package Type

RoHS Part Composition/ Compliant RoHS Data

Temperature

Comments

Samples/Demo

A8298SESTR-T
20-lead QFN
view data
-20 °C to 85 °C new

Contact Local Sales Representative or check distributor stock

APEK8298SES-01-T DEMO BOARD No
-20 °C to 85 °C new Contact Local Sales Representative

Distributor Stock

Check Stock

Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
10/4/2011

Allegro | Product | A8298 Single LNB Supply and Control Voltage Regulator

Copyright 2011 Allegro MicroSystems, Inc.
• 115 Northeast Cutoff, Worcester, MA 01606 USA
• Phone
• Fax:
10/4/2011

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A8298SESTR-T Datasheet file may be downloaded here without warranties.

Datasheet ID: A8298SESTR-T 516072