30 PSI-G-DO-MIL

30 PSI-G-DO-MIL Datasheet

30 INCH-D-DO-MIL

Part	Datasheet
30 PSI-G-DO-MIL	30 PSI-G-DO-MIL (pdf)

Related Parts	Information
30 INCH-D-DO-MIL	30 INCH-D-DO-MIL
20 INCH-D-DO-MIL	20 INCH-D-DO-MIL
100 PSI-G-DO-MIL	100 PSI-G-DO-MIL

PDF Datasheet Preview
all sensors p 408 225 4314 f 408 225 2079 e DIGITAL OUTPUT PRESSURE SENSORS Enhanced Digital Output Sensors MILITARY GRADE • 5” H2O to 100psi Pressure Ranges • All Combined Errors Over Temperature Less Than Typical • Wide -40 to 125°C Compensated Temperature Range • Electrically Compatible to All Sensors GA142 Series • Enhanced Dual Serial Interface Mode • Medical Instrumentation • Environmental Controls • HVAC • Meteorology The Digital Output pressure sensors are based upon a proprietary surface mapping technology to produce a fully digital output that virtually eliminates all repeatable errors over temperature and pressure. This series provides a 12 bit digital serial output 14 bit in High Resolution Mode with superior offset, span and linearity characteristics. The output is SPI and compatible as well as fully compatible with the All Sensors GA142 Series sensors. In addition to synchronous communications, the Digital Output pressure sensors incorporates a bi-directional, TTL level, asynchronous serial interfaces mode hardware selectable 9,600 or 19,200 baud . This mode includes a command set that allows the host to interrogate the sensor for model information, pressure range, serial number, pressure units and conversion factor. The command set also allows the host to select a high resolution output mode, make minor adjustments to offset and has an addressable feature that alows multiple sensors to be tied to the same interface buss. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. All signals are 5V TTL/CMOS compatible. Pin Descriptions Pin Size x Typical Pin 1 2 3 4 5 6 NOTES 1 Dimensions in inches millimeters Pin Label 1 Vcc Description +5V power supply input 2 Data/SI Data output for synchronous mode. Serial in for asynchronous mode. 3 Clock/SO Clock output for synchronous mode. Serial out for asynchronous mode. 4 Ready/Mode Ready output for synchronous mode. Selects asynchronous mode when held low during reset. 5 Convert/BR Convert input for synchronous mode. Selects one of two baud rates for asynchronous mode low=9,600, high=19,200 . 6 Ground Ground for power and signals a 6296 San Ignacio, Suite E & F, San Jose, CA 95119 all sensors Absolute Maximum Ratings Environmental Specifications Supply Voltage Vcc Voltage on Any Pin with Respect to Gnd Common-mode pressure Lead Temperature soldering 2-4 sec. Standard Pressure Ranges Operating Pressure 5 INCH-D-DO-MIL -5 to 5 10 INCH-D-DO-MIL -10 to 10 20 INCH-D-DO-MIL -20 to 20 30 INCH-D-DO-MIL -30 to 30 1 PSI-D-DO-MIL

PDF Datasheet Preview

all sensors
p 408 225 4314 f 408 225 2079 e

DIGITAL OUTPUT PRESSURE SENSORS

Enhanced Digital Output Sensors MILITARY GRADE
• 5” H2O to 100psi Pressure Ranges
• All Combined Errors Over Temperature Less Than Typical
• Wide -40 to 125°C Compensated Temperature Range
• Electrically Compatible to All Sensors GA142 Series
• Enhanced Dual Serial Interface Mode
• Medical Instrumentation
• Environmental Controls
• HVAC
• Meteorology

The Digital Output pressure sensors are based upon a proprietary surface mapping technology to produce a fully digital output that virtually eliminates all repeatable errors over temperature and pressure. This series provides a 12 bit digital serial output 14 bit in High Resolution Mode with superior offset, span and linearity characteristics. The output is SPI and compatible as well as fully compatible with the All Sensors GA142 Series sensors.

In addition to synchronous communications, the Digital Output pressure sensors incorporates a bi-directional, TTL level, asynchronous serial interfaces mode hardware selectable 9,600 or 19,200 baud . This mode includes a command set that allows the host to interrogate the sensor for model information, pressure range, serial number, pressure units and conversion factor. The command set also allows the host to select a high resolution output mode, make minor adjustments to offset and has an addressable feature that alows multiple sensors to be tied to the same interface buss.

This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. All signals are 5V TTL/CMOS compatible.

Pin Descriptions

Pin Size x

Typical

Pin 1 2 3 4 5 6

NOTES 1 Dimensions in inches millimeters

Pin Label 1 Vcc

Description +5V power supply input
2 Data/SI

Data output for synchronous mode. Serial in for asynchronous mode.
3 Clock/SO

Clock output for synchronous mode. Serial out for asynchronous mode.
4 Ready/Mode Ready output for synchronous mode. Selects asynchronous mode when held low during reset.
5 Convert/BR

Convert input for synchronous mode. Selects one of two baud rates for asynchronous mode low=9,600, high=19,200 .
6 Ground

Ground for power and signals
a 6296 San Ignacio, Suite E & F, San Jose, CA 95119
all sensors

Absolute Maximum Ratings

Environmental Specifications

Supply Voltage Vcc Voltage on Any Pin with Respect to Gnd Common-mode pressure Lead Temperature soldering 2-4 sec.

Standard Pressure Ranges

Operating Pressure
5 INCH-D-DO-MIL
-5 to 5
10 INCH-D-DO-MIL
-10 to 10
20 INCH-D-DO-MIL
-20 to 20
30 INCH-D-DO-MIL
-30 to 30
1 PSI-D-DO-MIL

More datasheets: 1183.32 | 1100.25.205 | 1100.32.210 | SK-22D01-MG 5 NS | 6230/25C SL001 | 6230/25C SL002 | CD4010CN | 1766 | B88069X5581T502 | 3561

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 30 PSI-G-DO-MIL Datasheet file may be downloaded here without warranties.

Datasheet ID: 30 PSI-G-DO-MIL 515992