PRODUCT ID 953
Part | Datasheet |
---|---|
![]() |
953 (pdf) |
PDF Datasheet Preview |
---|
EL WIRE/TAPE/PANEL / EL STARTER PACKS EL Flowing Effect Wire with Inverter - Pink meter ft PRODUCT ID 953 If you want to make your EL project a little more dynamic, you can swap in this nifty 'flowing effect' EL wire for the every-day stuff. Instead of a single core, this wire is actually a bundle of three thin EL wires. Inside the inverter is a little timer that will cycle through the strands to make it look like its moving. There's a wheel to adjust the speed and a button to select the mode. The three modes are 'all on', 'all off' and 'flow effect' This pack comes with 2 meters of EL flow wire attached to a 2xAA inverter, use any AA batteries alkalines are better and brighter but it works fine with the NiMH rechargeables we tried . There's a belt clip on the inverter so you can attach it to something. This EL type isn't meant to be cut and re-soldered because of the triple-core so keep in mind that you can cut it short but we don't suggest trying to splice or re-solder to the wire. Lasts about 5 hours on a set of two batteries. 7/27/2015 |
More datasheets: 2DA200K | 2DA200J | 2DB101K | 2DB102K | 2DB102J | 2DB151K | 2DB151J | 1DC103J | 2DC302K | W2S130-AA03-87 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 953 Datasheet file may be downloaded here without warranties.