908
908 Datasheet
PRODUCT ID 908
| Part | Datasheet |
|---|---|
908 |
908 (pdf) |
| PDF Datasheet Preview |
|---|
| Panel Mount USB Cable - A Male to A Female PRODUCT ID 908 This handy USB extension cable will make it easy for you to enclose a device that has a type USB host port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box. The jack half has two mounting 'ears' with 4-40 screws installed, 30mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire unit is long from tip to tip with cabling between USB connectors . 1/27/2016 Technical Details Panel mount USB type A socket with USB type A plug at cable end 28 AWG data, 24 AWG power wires Shielded with wire braid As of May 9th, 2014 the dimensions are: / 340mm long from tip to tip / 259 mm cable length between USB connectors Two 10mm 4-40 mounting screws, 30mm apart Weight 27g |
| More datasheets: BRN6044-0007S | BRN6044-0008S | BRN6044-0009S | BRN6044-0010S | BRN6044-0012S | BRN6044-0013S | BRN6044-0014S | BRN6044-0015S | 15-21UBC/C430/TR8 | 811102B00000 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 908 Datasheet file may be downloaded here without warranties.