824
824 Datasheet
PRODUCT ID 824
| Part | Datasheet |
|---|---|
824 |
824 (pdf) |
| PDF Datasheet Preview |
|---|
| PROTOTYPING / WIRING Premium Female/Male 'Extension' Jumper Wires - 40 x 12" 300mm PRODUCT ID 824 Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" 300mm long and come in a 'strip' of 40 4 pieces of each of ten rainbow colors . They have male header contacts on one end and female header contacts on the other. They fit cleanly next to each other on standard-pitch 2.54mm header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. We have these in three handy lengths 3"/75mm, 6"/160mm and 12"/300mm. If you want the female/female type or male/male type, we have those too! For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 7/23/2015 |
| More datasheets: AT28C010-12PU | AT28C010-15PU | CD4013BCMX | CD4013BCSJ | CD4013BCSJX | CD4013BCM | CD4013BCN | CMLD4448 BK | DFR0346 | 65-21/BHC-FS1T1B14/2AA |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 824 Datasheet file may be downloaded here without warranties.