3577
3577 Datasheet
PRODUCT ID 3577
| Part | Datasheet |
|---|---|
3577 |
3577 (pdf) |
| PDF Datasheet Preview |
|---|
| Pimoroni Pico HAT Hacker PRODUCT ID 3577 Pimoroni's Pico HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a 0.8mm PCB, so you can solder it right onto the pins on your Pi and still have enough height on a standard header to fit a HAT or pHAT on top. There are handy labels for all of the pins, with BCM pin numbering on one side, and more descriptive labels on the other to show where the I2C, UART, SPI, PWM, and I2S pins are. You can solder the Pico HAT Hacker either way up, depending on which set of labels you find more useful. Features o BCM and descriptive pin labelling o Mounting holes M2.5 o 0.8mm thick PCB o Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W Technical Details o You'll need to pick up an extra male header to solder onto Pico HAT Hacker o Be sparing with the solder when soldering Pico HAT Hacker onto the pins of your Pi, otherwise the solder will wick up the pins, and you'll find it cumbersome to fit HATs/pHATs on top o Dimensions 65x19x0.8mm LxWxH For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or contact Pimoroni directly. Product Weight 2.1g / 0.1oz |
| More datasheets: F0413A | F0411A | F0412A | F0414A | DG-ACC-JLNK | M13085 SL002 | M13085 SL005 | M13085 SL001 | 94806 | 94823 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3577 Datasheet file may be downloaded here without warranties.