3196

3196 Datasheet

PRODUCT ID 3196

Part	Datasheet
3196	3196 (pdf)

PDF Datasheet Preview
Pimoroni Zero LiPo PRODUCT ID 3196 • Description Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the Features tiny little Pimoroni Zero LiPo! It aims to give you the most compact power supply possible for all versions of Raspberry Pi. You can either solder the 0.8mm thick PCB directly to the bottom of your GPIO header for a permanent solution or solder on the provided 2x4 female header which will allow you to remove your Zero LiPo at any time but will block the GPIO pins . It uses the TPS61232 Step-Up Boost Converter from Texas Instruments which offers up to 96% efficiency. The board includes power on and battery low indicator LEDs. During shutdown due to undervoltage or external selection the quiescent current is just 15uA sip. Please note This is not a charger, you will need a separate charger to keep your LiPo/LiIon batteries juiced up! We recommend using our Micro Lipo to top up your battery. Features o 0.8mm thick PCB o Shaped to sit as low as possible on the Raspberry Pi 3, 2, Zero, A+, B+ o 2-pole JST connector ideal for most LiPo/LiIon batteries o Power and low battery LED indicators o Supplies up to 1.5A continuous current o Low battery warning at 3.4V assets GPIO #4 high o Automatic shutdown at 3.0V to protect your battery o VBAT+, GND, and EN pins available to break out o 15uA quiescent current Kit includes Zero LiPo, Rubber foot, 2x4 female header • Technical Details For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or contact Pimoroni directly. Product Dimensions 40.4mm x 22.2mm x 6.5mm / x Product Weight 2.6g / 0.1oz Engineered in NYC Adafruit

PDF Datasheet Preview

Pimoroni Zero LiPo

PRODUCT ID 3196
• Description

Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the Features tiny little Pimoroni Zero LiPo! It aims to give you the most compact power supply possible for all versions of Raspberry Pi. You can either solder the 0.8mm thick PCB directly to the bottom of your GPIO header for a permanent solution or solder on the provided 2x4 female header which will allow you to remove your Zero LiPo at any time but will block the GPIO pins . It uses the TPS61232 Step-Up Boost Converter from Texas Instruments which offers up to 96% efficiency. The board includes power on and battery low indicator LEDs. During shutdown due to undervoltage or external selection the quiescent current is just 15uA sip. Please note This is not a charger, you will need a separate charger to keep your LiPo/LiIon batteries juiced up! We recommend using our Micro Lipo to top up your battery.

Features o 0.8mm thick PCB o Shaped to sit as low as possible on the Raspberry Pi 3, 2, Zero, A+, B+ o 2-pole JST connector ideal for most LiPo/LiIon batteries o Power and low battery LED indicators o Supplies up to 1.5A continuous current o Low battery warning at 3.4V assets GPIO #4 high o Automatic shutdown at 3.0V to protect your battery o VBAT+, GND, and EN pins available to break out o 15uA quiescent current

Kit includes Zero LiPo, Rubber foot, 2x4 female header
• Technical Details

For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or contact Pimoroni directly. Product Dimensions 40.4mm x 22.2mm x 6.5mm / x Product Weight 2.6g / 0.1oz

Engineered in NYC Adafruit

More datasheets: B43520A5158M000 | CTX10-5P-R | CY30703 | 7573-ID/U12 | RM4X10MM 2701 | RM2X8MM 2701 | S5U13515P00C100 | 17802-PS3 | 79237807 | FDS8670

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3196 Datasheet file may be downloaded here without warranties.

3196

3196 Datasheet

Datasheet ID: 3196 511445