PRODUCT ID 317
Part | Datasheet |
---|---|
![]() |
317 (pdf) |
PDF Datasheet Preview |
---|
EL wire 2xAA pocket inverter PRODUCT ID 317 • Description A small, portable inverter for EL wire. Powers off of 2 AA batteries not included! , it can drive 1 to 8 feet about 2.5m of our high-brightness EL wire for 10 hours. There is a button for selecting steady/blink/off modes. There's a removable clip on the back. Comes with a 2.5mm pitch female JST connector To connect a piece EL wire to this, you'll want a male connector wire The EL inverter requires a 'load' to stabilize itself. Do not run the inverter without at least 1 ft of EL wire attached! Otherwise the inverter can spike and damage itself Like all inverters we've used, the 2000 Hz oscillation is slightly audible. To reduce the squeaking, we suggest opening up the case padding it with thick foam tape/weatherstripping. Squirting some hot glue around the capacitors may also help. We managed to get it silent this way. • Technical Details Dimensions o Size 101mm x 31mm x 19mm 4in x 1.25in x 0.75in o Weight without batteries 34g 1.2oz Engineered in NYC Adafruit |
More datasheets: 7-338-2PP-BA | 7-338-3PP-BA | 7-338-1PP-BA | 7-339-3PP-BA | 7-339-1PP-BA | 7-335-000-BA | CY8C24423A-24LFXI | CY8C24423A-24LFXIT | 2989 | CS-SIGNET-01 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 317 Datasheet file may be downloaded here without warranties.