PRODUCT ID 3103
Part | Datasheet |
---|---|
![]() |
3103 (pdf) |
PDF Datasheet Preview |
---|
PSP 3000 2-Axis Analog Thumb Joystick PRODUCT ID 3103 Sometimes a simple analog control device can be the perfect tactile solution for your project, but 3000 2Axis Analog Thumb Joystick to fulfill your directional analog input needs! This is a replacement component for the PSP 3000, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable project. It's similar to this other version, but has a cable for connecting rather than direct-solder The joystick is a 'self-centering' analog-type. That means it basically acts like two 10K potentiometers, one for up/down and another for left/right. It has a built-in flex cable that can plug right into a fine pitch 0.5mm connector. The four pins connect to power, ground and then two analog outputs. As the joystick is moved around, the voltage will follow the motion. When you release the joystick it will center itself. The connector is very fine pitch, and not easy to solder to - so we suggest using our 4-pin breakout board to make it easier to connect to a breadboard it is not included! Technical Details Product Dimensions 44.1mm x 18.6mm x 11.7mm / x Product Weight 1.8g / 0.1oz Engineered in NYC Adafruit |
More datasheets: ST11L4S4V30QEJ22 | ST22L5S5V30BJ3J9322 | ST11L4S4V30QJ12 | ST11L5S5CQJ3J9322 | ST22L4S4V30BEJ22 | ST22L5S5ZQJ3J9022 | FIN1017M | 90716-80025T | VAOD-A565G9-BW/43 | VAOD-C565G9-BW/43 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 3103 Datasheet file may be downloaded here without warranties.