2994

2994 Datasheet

PRODUCT ID 2994

Part	Datasheet
2994	2994 (pdf)

PDF Datasheet Preview
Tower Light - Red Alert Light with Buzzer 12VDC PRODUCT ID 2994 THE REACTOR'S MELTING DOWN! GRAB THE FUEL CORE, JENNA, AND EVACUATE THE COMMAND CENTER! With this flexible Red Alert Light you can monitor the status of a project, machine, or even if the bathroom is occupied! We got some really nice tower lights here, first up they come in slimming Adafruit black, they're easy to attach with mounting holes, and you can rotate the light mount so it can be horizontal, vertical or any angle in between 180 rotation . This is the one color version - Red - but we also have a Red Yellow Green Alert Light in the store if you want more versatility! Alert tower lights are really easy to use. The brown wire is the common +12V power line, then the other wires are connected to ground to activate the LED light or buzzer. The red wire controls the red LED light and the orange wire is what controls the buzzer which will sound continuously when the wire is grounded. You will need a 12VDC power supply to get it going, the one that we carry will do well for fixed installations. If you are using this with a 3V or 5V microcontroller or computer, use 2 x NPN transistors or N-channel mosfets to sink current from each wire. Our guide on analog LED strips is pretty much the same wiring you need, except its only about 50mA per segment. If you desperately need something that can run off of 5V you might consider wiring up your own white LEDs instead of using the LEDs that come with it. Note Shipping weight reflects UPS' new dimensional weight regulations. 2/24/2016 Technical Details Range of motion 180° Height 252mm / Diameter of light 50mm / Weight 162g

PDF Datasheet Preview

Tower Light - Red Alert Light with Buzzer 12VDC

PRODUCT ID 2994

THE REACTOR'S MELTING DOWN! GRAB THE FUEL CORE, JENNA, AND EVACUATE THE COMMAND CENTER! With this flexible Red Alert Light you can monitor the status of a project, machine, or even if the bathroom is occupied!

We got some really nice tower lights here, first up they come in slimming Adafruit black, they're easy to attach with mounting holes, and you can rotate the light mount so it can be horizontal, vertical or any angle in between 180 rotation .

This is the one color version - Red - but we also have a Red Yellow Green Alert Light in the store if you want more versatility!

Alert tower lights are really easy to use. The brown wire is the common +12V power line, then the other wires are connected to ground to activate the LED light or buzzer. The red wire controls the red LED light and the orange wire is what controls the buzzer which will sound continuously when the wire is grounded.

You will need a 12VDC power supply to get it going, the one that we carry will do well for fixed installations. If you are using this with a 3V or 5V microcontroller or computer, use 2 x NPN transistors or N-channel mosfets to sink current from each wire. Our guide on analog LED strips is pretty much the same wiring you need, except its only about 50mA per segment. If you desperately need something that can run off of 5V you might consider wiring up your own white LEDs instead of using the LEDs that come with it.

Note Shipping weight reflects UPS' new dimensional weight regulations.
2/24/2016

Technical Details

Range of motion 180° Height 252mm / Diameter of light 50mm / Weight 162g

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2994 Datasheet file may be downloaded here without warranties.

2994

2994 Datasheet

Datasheet ID: 2994 510471