2442

2442 Datasheet

PRODUCT ID 2442

Part	Datasheet
2442	2442 (pdf)

PDF Datasheet Preview
Continuous Rotation Micro Servo - FS90R PRODUCT ID 2442 Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screws, as shown. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE see here for an example sketch . Position "90" 1.5ms pulse is stop, "180" 2ms pulse is full speed forward, "0" 1ms pulse is full speed backwards. They may require some simple calibration, simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving. 11/27/2015 Technical Details Datasheet No load speed 110RPM 4.8v / 130RPM 6v Running Current at no load 100mA 4.8v / 120mA 6v Peak Stall Torque 4.8v kg/cm / oz/in Peak Stall Torque 6v kg/cm / oz/in Stall Current 550mA 4.8v / 650mA 6v 32mm x 30mm x 12mm / x Wire Length 240mm / Weight 10g Spline Count 21

PDF Datasheet Preview

Continuous Rotation Micro Servo - FS90R

PRODUCT ID 2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screws, as shown.

Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE see here for an example sketch . Position "90" 1.5ms pulse is stop, "180" 2ms pulse is full speed forward, "0" 1ms pulse is full speed backwards. They may require some simple calibration, simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving.
11/27/2015

Technical Details

Datasheet

No load speed 110RPM 4.8v / 130RPM 6v Running Current at no load 100mA 4.8v / 120mA 6v Peak Stall Torque 4.8v kg/cm / oz/in Peak Stall Torque 6v kg/cm / oz/in Stall Current 550mA 4.8v / 650mA 6v 32mm x 30mm x 12mm / x Wire Length 240mm / Weight 10g Spline Count 21

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2442 Datasheet file may be downloaded here without warranties.

2442

2442 Datasheet

Datasheet ID: 2442 509114