2201
2201 Datasheet
Sub-micro Servo - SG51R ID 2201
| Part | Datasheet |
|---|---|
2201 |
2201 (pdf) |
| PDF Datasheet Preview |
|---|
| Sub-micro Servo - SG51R ID 2201 This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate approximately 180 degrees 90 in each direction and works just like the standard kind you're used to but much smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE see here for an example sketch Position "0" 1.5ms pulse is middle, "90" ~2ms pulse is all the way to the right, "-90" ~1ms pulse is all the way to the left. 2/23/2015 |
| More datasheets: 1052NX5 | 1090NX3-28V | 1090N4-28V | 1090NX1-12V | 1050NX1 | 1050N4 | 1050NX4 | 1050NX3 | 1090NX4-12V | 1090N1-28V |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2201 Datasheet file may be downloaded here without warranties.