1989

1989 Datasheet

PRODUCT ID 1989

Part	Datasheet
1989	1989 (pdf)

PDF Datasheet Preview
Adafruit Pi T-Cobbler Plus Kit - Breakout for Pi A+/B+/Pi 2 PRODUCT ID 1989 The Raspberry Pi A+/B+/Pi 2 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s/Pi 2's 40 pins. That's why we now carry the Adafruit Pi T-Cobbler Plus - Breakout + Cable for Raspberry Pi A+/B+/Pi This Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. We also have the more compact original Cobbler. We also carry a Pi T-Cobbler for Raspberry Pi A+/B+/Pi 2 that does not require soldering! The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ and Pi 2 that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the Pi super easy. The Pi T-Cobbler Plus kit comes with a 40 pin ribbon cable, a T-cobbler PCB, a 40pin GPIO socket, and some male header strips. Once soldered, you can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard or even a prototyping board like the PermaProto . The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. Designed for use with Raspberry Pi Model A+/B+/Pi 2 only and requires some soldering! The Raspberry Pi B+/Pi 2, solderless breadboard, breadboarding wires, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well! Note The Raspberry Pi Model A+ and Raspberry Pi 2 are also compatible with this product! 11/13/2015 Technical Details PCB Dimensions: 73mm x 20mm x 2mm / x Width at top of T 58mm / Weight 7g Assembled Dimensions: 73mm x 20mm x 11mm / x Height with pins 19mm / Width at top of T 58mm / Weight 14g

PDF Datasheet Preview

Adafruit Pi T-Cobbler Plus Kit - Breakout for Pi A+/B+/Pi 2

PRODUCT ID 1989

The Raspberry Pi A+/B+/Pi 2 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s/Pi 2's 40 pins.

That's why we now carry the Adafruit Pi T-Cobbler Plus - Breakout + Cable for Raspberry Pi A+/B+/Pi This Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. We also have the more compact original Cobbler.

We also carry a Pi T-Cobbler for Raspberry Pi A+/B+/Pi 2 that does not require soldering!

The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ and Pi 2 that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the Pi super easy.

The Pi T-Cobbler Plus kit comes with a 40 pin ribbon cable, a T-cobbler PCB, a 40pin GPIO socket, and some male header strips.

Once soldered, you can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard or even a prototyping board like the PermaProto . The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

Designed for use with Raspberry Pi Model A+/B+/Pi 2 only and requires some soldering!

The Raspberry Pi B+/Pi 2, solderless breadboard, breadboarding wires, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well!

Note The Raspberry Pi Model A+ and Raspberry Pi 2 are also compatible with this product!
11/13/2015

Technical Details

PCB Dimensions:
73mm x 20mm x 2mm / x Width at top of T 58mm / Weight 7g

Assembled Dimensions:
73mm x 20mm x 11mm / x Height with pins 19mm / Width at top of T 58mm / Weight 14g

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1989 Datasheet file may be downloaded here without warranties.

1989

1989 Datasheet

Datasheet ID: 1989 507859