1956
1956 Datasheet
PRODUCT ID 1956
| Part | Datasheet |
|---|---|
1956 |
1956 (pdf) |
| PDF Datasheet Preview |
|---|
| Premium Male/Male Jumper Wires - 20 x 3" 75mm PRODUCT ID 1956 • Description Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" 75mm long and come in a 'strip' of 20 2 pieces of each of ten rainbow colors . They have male header contacts on either end and fit cleanly next to each other on standard-pitch 2.54mm header. The best part is they come in a 20-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. We have tons of different Jumper Wires available, in all shapes and sizes! Note The length of the jumper wires is sometimes a bit longer than what is listed. For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than • Technical Details o Length 75mm / 3" o 12g o Each wire is 28 AWG 7 strands 36 AWG Engineered in NYC Adafruit |
| More datasheets: AT17LV256-10CC | AT17LV040-10BJC | AT17LV512-10CC | AT17LV128-10CI | AT17LV040-10BJI | AT17LV002-10SI | AT17LV002-10SC | CMD11505PY | CMD11505PG | CMD11505UR |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1956 Datasheet file may be downloaded here without warranties.