PRODUCT ID 1779
Part | Datasheet |
---|---|
![]() |
1779 (pdf) |
PDF Datasheet Preview |
---|
OctoWS2811 Adapter for Teensy Control tons of NeoPixels! PRODUCT ID 1779 Description This adapter board connects the Teensy to up to thousands of WS2811/WS2812 a.k.a NeoPixel and compatible LEDs using the OctoWS2811 Library. It features a 74HCT245 buffer chip and 100 ohm series matching resistors. A CAT6 Ethernet cable is used to connect this board to the LED strips. A CAT6 cable is designed for very high bandwidth, minimal cross-talk between twisted pairs, and 100 ohm impedance, for a very high quality signal. Teensy is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE Teensyduino or programming directly in C language. This product does NOT include a Teensy, it's just the adapter! Technical Details o Four self-threading screws o Eight LED outputs o Dimensions o 56mm x 34mm x 2mm / x o Height with Ethernet Outlets 15mm / o Weight 11.1g Teensy OctoWS2811 Adaptor Engineered in NYC Adafruit |
More datasheets: CY7C63221A-PXC | CY7C63221A-PC | CY7C63231A-SXCT | CY7C63231A-SXC | CY7C63231A-PXC | EKI-2711HPI-AE | AT04-12PD-EC01 | REFERENCE DESIGN 48V | KSC421 V30 ACT2.95 LFS | KSC421 V30 ACT3.17 LFS |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1779 Datasheet file may be downloaded here without warranties.