Adafruit Multi-pitch FPC Adapter - 40 Pin 0.5/0.6/0.7/0.8/1.0mm ID 1436
Part | Datasheet |
---|---|
![]() |
1436 (pdf) |
PDF Datasheet Preview |
---|
Adafruit Multi-pitch FPC Adapter - 40 Pin 0.5/0.6/0.7/0.8/1.0mm ID 1436 You will roll lucky 7's and connect to nearly any kind of FPC/flex cable with Ladyada's Super Lucky 40-pin FPC to breadboard adapter plate. You get 40 pads of 0.5mm, 0.6mm, 0.7mm, 0.8mm or 1.0mm. It may even work for some 2.0mm pitch connectors. We designed this for use in house, to quickly connect to FPCs we need to test. But we also thought it might be useful for our customers. Each pad is broken out to both a 2x20 spaced header as well as two strips of 20-pin long spaced header inches apart. It can accommodate most ZIF and snap connectors or just solder the FPC directly on. This adapter will make prototyping much easier on you! Each order comes with a single-sided PCB plate no header or other connectors included. 2/23/2015 |
More datasheets: AOZ1021AI | AOZ1021AI_2 | AOZ1021AIL_3 | AOZ1021AIL_2 | AOZ1021AI-5L | AOZ1021AI_3 | AOZ1021AI_4 | AOZ1021AIL | A09-HASM-675 | CY7C09349AV-12AC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1436 Datasheet file may be downloaded here without warranties.