1257
1257 Datasheet
PRODUCT ID 1257
| Part | Datasheet |
|---|---|
1257 |
1257 (pdf) |
| PDF Datasheet Preview |
|---|
| ROBOTICS & CNC / CNC Adjustable Angle Support for 2020 Aluminum Extrusion PRODUCT ID 1257 This is an interesting hardware piece addition for 20x20 aluminum extrusion. Rather than being a 90 degree type plate, its a hinged piece that connects the end of one extrusion to the side of another, but with any angle you wish. You can loosen/tighten the angle with the screw on the side. Given its just a bolt, it's not incredibly strong so while you can use it for structure, its not a load-bearing connector make sure there isn't a lot of torque on the joint. You can use threadlock to make it stronger. The half that connects to the side one an extrusion simply uses a single M4 or M5 x 8mm long screw + T-nut as you'd use with any other plate. For the half that connects to the end of an extrusion, you'll need to tap the 5mm diameter centerhole of the extrusion and screw directly in. We don't include a tap or matching screw so you'll want to pick those up from a hardware store. 7/24/2015 |
| More datasheets: HCPL-0810-500E | HCPL-0810-500 | HCPL-0810-000E | HCPL-0810 | HCPL-8100-000E | 7343-2UYC/S400-A6 | 7343-2UYC/S400-A9 | FQP44N08 | 17100-600 | FDFS2P103A |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1257 Datasheet file may be downloaded here without warranties.