SK-70DT

SK-70DT Datasheet


SK-70DT Starter Kit

Part Datasheet
SK-70DT SK-70DT SK-70DT (pdf)
PDF Datasheet Preview
uLCD-70DT Display Module

This item includes the following:
• uLCD-70DT Display Module with Resistive

Touch
• 150mm 5 way Female-Female jumper cable,
for quick connection to another device or breadboard
• 5 way Male-Male adaptor for converting the

Female-Female cable to be Male-Female
• Quick Start Guide
uLCD-70DT

SK-70DT Starter Kit

This item includes the following:
• uLCD-70DT Display Module with Resistive

Touch
• uUSB-PA5 Programming Adaptor
• 2gb microSD Card
• 150mm 5 way Female-Female jumper cable,
for quick connection to another device or breadboard
• 5 way Male-Male adaptor for converting the

Female-Female cable to be Male-Female
• Quick Start Guide

SK-70DT
4D Systems highly recommends all first time buyers of 4D Systems’ displays, to purchase the Starter Kit when purchasing their first 4D Systems display solution. The Starter Kit provides all the hardware that is required to get the user up and running. Not all development environments and features will be needed by every user, however by purchasing the display solution in a Starter Kit, it ensures that if you want to take full advantage of the 4D Systems display solution and try out each of the 4D Workshop4 Environments, upgrade PmmC/firmware, you can. The Designer environment can utilise every feature of the display, however depending on the user requirements, a micro-SD uSD card may not be required. The uSD card is used when displaying images/video/sound, along with datalogging to uSD, and a programming cable is definitely required for downloading compiled code and PmmC/Firmware updates. The ViSi environment is the same as Designer in terms of feature utilisation, but is image based so requires a uSD card, along with a programming cable. The ViSi-Genie environment is also image based, and therefore requires a uSD card and programming cable also. The Serial environment does not require either a uSD or Programming cable to be used, however can utilise both depending on the user requirements. The uSD card can be used for such things as storage of multimedia files and datalogging, and the Programming cable for PmmC/Firmware updates, or changing to one of the other three programming environments.
11/5/2015
More datasheets: FOD250LSD | FOD050LR1 | FOD050L | FOD050LR2 | FOD053LR2 | FOD053L | AOD4144_003 | AOI4144_002 | FJAF6916TU | EALP05RDDBA4


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SK-70DT Datasheet file may be downloaded here without warranties.

Datasheet ID: SK-70DT 522010