6112-1K

6112-1K Datasheet

6112

Part	Datasheet
6112-1K	6112-1K (pdf)

Related Parts	Information
6105-B1K	6105-B1K
6105-B	6105-B
6112	6112
8107	8107

PDF Datasheet Preview
3 ST* Connectors and Accessories The 3M ST* Connector product line provides high repeatability and low light loss for premises, LAN and telco applications. The improved connector design is compatible with the AT&T ST* connector product line as well as Systimax* components and other ST* connector products. The 3M products are supplied with a high quality PC finish on zirconia ceramic ferrules. Hot Melt ST* Connector, Bayonet Multimode/Single-mode The 3M Hot Melt ST* Fiber Optic Connector is a keyed bayonet-style multimode/single-mode connector, which incorporates 3M’s hot melt adhesive and pre-radiused PC zirconia ceramic ferrule technologies. The result is a quick mount fiber optic connector that delivers low light loss, solid intermateability and mechanical stability, while costing less to install. ST* Hot Melt Bayonet Connector for Multimode/Single-mode Pre-loaded Hot Melt adhesive Fast cure time Unlimited adhesive shelf life No crimping required Pre-radiused PC ferrule Zirconia ceramic ferrule Re-usable Connector No epoxy to mix no syringe needed shorter set-up time fewer consumables no shelf life no mess no waste Short heat and cool cycle saves time Eliminates outdated epoxy inventory and stock rotation requirements Fewer tools saves time Assured contact of fibers consistent performance Durability stability through temperature change quality performance Ability to reterminate with same connector saves time and money Crimplok ST* Connector, Bayonet Multimode/Single-mode The 3M Crimplok ST* Connector multimode/singlemode connector combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. Crimplok connectors are the ideal solution for emergency restoration work or for quickly making fiber connections at the desk. Their time-saving features are also valuable in larger network applications where average installation time is less than 2 minutes per connector. Crimplok connectors are faster to install than epoxy connectors since there is no set-up or curing time. And Crimplok connectors do not require special heating tools or ovens, so time spent searching for electrical outlets is eliminated. The Crimplok connector is ideal for fiber-tothe-desk and other applications where a few connectors are installed at a time. Crimplok ST* Connectors Non-adhesive design No set-up required No electricity required Meets TIA-568 specifications Clean and simple terminations Saves time and money Installation anywhere Rugged, reliable performance ST* Connector Dust cap Ferrule Backbone BAYONET Spring C-Ring Boot ST* Connector, Epoxy Bayonet Multimode/ Single-mode The Epoxy ST* Connector is bayonet style for quick interconnect and high repeatability. ST* Epoxy Bayonet Connector for Multimode/Single-mode Bayonet design Keyed connector Pre-radiused PC ferrule Zirconia ceramic ferrule Quick interconnect Assures high repeatability Assures contact of fibers low reflection, consistent performance Durability stability through temperature change quality performance Specifications for ST* Bayonet Connectors Hot Melt Bayonet Multimode Single-mode Crimplok Multimode Single-mode Epoxy Bayonet Multimode Single-mode Product number 6100 8100YS 6901 8901 6105 Ordering Information Product Name Multimode Connectors 6100-W Hot Melt Bayonet ST* Connector MM, 125 um, white boot 6100-R Hot Melt Bayonet ST* Connector MM, red boot 6100-B Hot Melt Bayonet ST* Connector MM, black boot 6105-B Bayonet ST* Connector MM, 125 um Epoxy, black boot 6901 Crimplok MM ST* Connector 6100-W5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, white boot 6100-R5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, red boot 6100-B5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, black boot 6100-W1K Hot Melt Bayonet ST* Connector MM, 125 um, white boot, 1,000 Bulk 6100-R1K Hot Melt Bayonet ST* Connector MM, 125 um, red boot, 1,000 Bulk 6100-B1K Hot Melt Bayonet ST* Connector MM, 125 um, black boot, 1,000 Bulk 6105-R Bayonet ST* Connector MM, 125 um Epoxy, red boot 6105-B1K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 1,000 Bulk 6105-R1K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 1,000 Bulk 6105-B10K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 10,000 Bulk 6105-R10K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 10,000 Bulk Multimode Couplings 6112 ST* Coupling MM, Threaded 6113 ST* Coupling MM Duplex, Threaded 6112-1K ST* Coupling MM Threaded 1,000 Bulk Single-mode Connectors 8100YS Hot Melt Bayonet ST* Connector SM 8106 ST* Bayonet Connector SM 126 µm, epoxy 8107 ST* Bayonet Connector SM 127 µm, epoxy 8901 Crimplok SM ST* Connector 8106-Y1K ST* Bayonet Connector SM 126 um, Epoxy 1,000 Bulk Single-mode Couplings 8113 Coupling SM Duplex, Threaded 8119 Coupling SM, Threaded Accessories 6192-A One Step Hot Melt Polishing Film 50 sheets/pkg. 6192-B Polishing Film for 6850 One Step Polishing Machine 08-00882 Metal polishing jig available separate from kits 6192-AA Single-mode Hot Melt Polishing Film .05µm 50 sheets/pkg. SM Lapping film for Crimplok, 80-6110-1312-1 50 sheets/pkg. One Step Crimplok Polishing Film, 80-6108-4532-5 50 sheets/pkg. ST-B ST* Boot Bulk Pack, Black ST-R ST* Boot Bulk Pack, Red ST-U ST* Boot Bulk Pack, Blue Polishing Machines/Portable Heaters 6850-A Polishing Machine with 110V converter, one step Terminating Kits 6355 HM Hot Melt Termination Kit 120V for all Hot Melt Connectors 6351 HM Hot Melt Termination Kit 230V for all Hot Melt Connectors 6955 Universal Crimplok Termination Kit for all Crimplok Connectors 8361 ST/FC/SC Universal Kit 230V epoxy for ST Bayonet, SC and FC style connectors 8365 ST/FC/SC Universal Kit 120V epoxy for ST Bayonet, SC and FC style connectors Shipping Unit 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 1 each 1 each 1 pkg. 1 pkg. 50 sheets/pkg. 1 each 1 pkg. 1 pkg. 1 pkg. 500/cs 500/cs 500/cs 1/cs. 1 kit 1 kit 1 kit 1 kit 1 kit * ST is a registered trademark of AT&T. * Systimax is a registered trademark of AT&T. * Estane is a registered trademark of Goodyear. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES Telecom Systems Division 6801 River Place Blvd. Austin, TX 78726-9000 800/426 8688 FAX 800/626 0329 INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Recycled Paper 50% pre-consumer 10% post-consumer Litho in USA. 3M IPC 2000 80-6111-6023-7 1102.5 DC/TG-1

PDF Datasheet Preview

3 ST* Connectors and Accessories

The 3M ST* Connector product line provides high repeatability and low light loss for premises, LAN and telco applications. The improved connector design is compatible with the AT&T ST* connector product line as well as Systimax* components and other ST* connector products.

The 3M products are supplied with a high quality PC finish on zirconia ceramic ferrules.

Hot Melt ST* Connector, Bayonet Multimode/Single-mode

The 3M Hot Melt ST* Fiber Optic Connector is a keyed bayonet-style multimode/single-mode connector, which incorporates 3M’s hot melt adhesive and pre-radiused PC zirconia ceramic ferrule technologies. The result is a quick mount fiber optic connector that delivers low light loss, solid intermateability and mechanical stability, while costing less to install.

ST* Hot Melt Bayonet Connector for Multimode/Single-mode

Pre-loaded Hot Melt adhesive

Fast cure time Unlimited adhesive shelf life No crimping required Pre-radiused PC ferrule Zirconia ceramic ferrule Re-usable Connector

No epoxy to mix no syringe needed shorter set-up time fewer consumables no shelf life no mess no waste

Short heat and cool cycle saves time

Eliminates outdated epoxy inventory and stock rotation requirements

Fewer tools saves time

Assured contact of fibers consistent performance

Durability stability through temperature change quality performance

Ability to reterminate with same connector saves time and money

Crimplok ST* Connector, Bayonet Multimode/Single-mode

The 3M Crimplok ST* Connector multimode/singlemode connector combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. Crimplok connectors are the ideal solution for emergency restoration work or for quickly making fiber connections at the desk. Their time-saving features are also valuable in larger network applications where average installation time is less than 2 minutes per connector. Crimplok connectors are faster to install than epoxy connectors since there is no set-up or curing time. And Crimplok connectors do not require special heating tools or ovens, so time spent searching for electrical outlets is eliminated. The Crimplok connector is ideal for fiber-tothe-desk and other applications where a few connectors are installed at a time.

Crimplok ST* Connectors

Non-adhesive design No set-up required No electricity required Meets TIA-568 specifications

Clean and simple terminations Saves time and money Installation anywhere Rugged, reliable performance

ST* Connector

Dust cap Ferrule Backbone BAYONET Spring C-Ring Boot

ST* Connector, Epoxy Bayonet Multimode/ Single-mode

The Epoxy ST* Connector is bayonet style for quick interconnect and high repeatability.

ST* Epoxy Bayonet Connector for Multimode/Single-mode

Bayonet design Keyed connector Pre-radiused PC ferrule

Zirconia ceramic ferrule

Quick interconnect

Assures high repeatability

Assures contact of fibers low reflection, consistent performance

Durability stability through temperature change quality performance

Specifications for ST* Bayonet Connectors

Hot Melt Bayonet Multimode Single-mode

Crimplok Multimode Single-mode

Epoxy Bayonet Multimode Single-mode

Product number
6100
8100YS
6901
8901
6105
Ordering Information

Product Name

Multimode Connectors
6100-W Hot Melt Bayonet ST* Connector MM, 125 um, white boot 6100-R Hot Melt Bayonet ST* Connector MM, red boot 6100-B Hot Melt Bayonet ST* Connector MM, black boot 6105-B Bayonet ST* Connector MM, 125 um Epoxy, black boot 6901 Crimplok MM ST* Connector 6100-W5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, white boot 6100-R5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, red boot 6100-B5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, black boot 6100-W1K Hot Melt Bayonet ST* Connector MM, 125 um, white boot, 1,000 Bulk 6100-R1K Hot Melt Bayonet ST* Connector MM, 125 um, red boot, 1,000 Bulk 6100-B1K Hot Melt Bayonet ST* Connector MM, 125 um, black boot, 1,000 Bulk 6105-R Bayonet ST* Connector MM, 125 um Epoxy, red boot 6105-B1K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 1,000 Bulk 6105-R1K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 1,000 Bulk 6105-B10K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 10,000 Bulk 6105-R10K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 10,000 Bulk

Multimode Couplings
6112 ST* Coupling MM, Threaded 6113 ST* Coupling MM Duplex, Threaded 6112-1K ST* Coupling MM Threaded 1,000 Bulk

Single-mode Connectors
8100YS Hot Melt Bayonet ST* Connector SM 8106 ST* Bayonet Connector SM 126 µm, epoxy 8107 ST* Bayonet Connector SM 127 µm, epoxy 8901 Crimplok SM ST* Connector 8106-Y1K ST* Bayonet Connector SM 126 um, Epoxy 1,000 Bulk

Single-mode Couplings
8113 Coupling SM Duplex, Threaded 8119 Coupling SM, Threaded

Accessories
6192-A One Step Hot Melt Polishing Film 50 sheets/pkg. 6192-B Polishing Film for 6850 One Step Polishing Machine
08-00882 Metal polishing jig available separate from kits 6192-AA Single-mode Hot Melt Polishing Film .05µm 50 sheets/pkg. SM Lapping film for Crimplok, 80-6110-1312-1 50 sheets/pkg. One Step Crimplok Polishing Film, 80-6108-4532-5 50 sheets/pkg. ST-B ST* Boot Bulk Pack, Black ST-R ST* Boot Bulk Pack, Red ST-U ST* Boot Bulk Pack, Blue

Polishing Machines/Portable Heaters
6850-A Polishing Machine with 110V converter, one step

Terminating Kits
6355 HM Hot Melt Termination Kit 120V for all Hot Melt Connectors 6351 HM Hot Melt Termination Kit 230V for all Hot Melt Connectors 6955 Universal Crimplok Termination Kit for all Crimplok Connectors 8361 ST*/FC/SC Universal Kit 230V epoxy for ST* Bayonet, SC and FC style connectors 8365 ST*/FC/SC Universal Kit 120V epoxy for ST* Bayonet, SC and FC style connectors

Shipping Unit
60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs.
60/cs. 60/cs. 60/cs.
60/cs. 60/cs. 60/cs. 60/cs. 60/cs.
1 each 1 each
1 pkg. 1 pkg. 50 sheets/pkg. 1 each 1 pkg. 1 pkg. 1 pkg. 500/cs 500/cs 500/cs
1/cs.
1 kit 1 kit 1 kit 1 kit 1 kit
* ST is a registered trademark of AT&T. * Systimax is a registered trademark of AT&T. * Estane is a registered trademark of Goodyear.

Important Notice

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES

Telecom Systems Division 6801 River Place Blvd. Austin, TX 78726-9000 800/426 8688 FAX 800/626 0329

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Recycled Paper 50% pre-consumer 10% post-consumer

Litho in USA. 3M IPC 2000 80-6111-6023-7 1102.5 DC/TG-1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 6112-1K Datasheet file may be downloaded here without warranties.

Datasheet ID: 6112-1K 521488