SR-350 1/8" BL48"BK

SR-350 1/8" BL48"BK Datasheet


SR-350 Tubing

Part Datasheet
SR-350 1/8" BL48"BK SR-350 1/8" BL48"BK SR-350 1/8" BL48"BK (pdf)
Related Parts Information
SR-350 1/4" BL48"BK SR-350 1/4" BL48"BK SR-350 1/4" BL48"BK
PDF Datasheet Preview
SR-350 Tubing

Semi-Rigid Polyolefin

Data Sheet

Product Description
3M SR-350 is a semi-rigid, heatshrinkable tubing that offers superior cutthrough and abrasion-resistance characteristics for optimum mechanical performance. In addition, SR-350 Tubing has excellent electrical-insulation and chemical-resistance properties.

SR-350 Tubing meets the requirements of MIL-DTL-23053/6, Class 1 & 2, AMS-3638 and AMS-3639. It is UL Recognized at 600 volts 125°C UL File Nos. E-39100 and E69751 .

SR-350 Tubing is rated for continuous operation from to 135°C 275°F and withstands operating temperatures to 300°C 572°F for short periods. Minimum shrink temperature for all SR-350 Tubing is 135°C 275°F .

SR-350 Tubing is ideally suited for strain-relief applications, wire marking and protective covering and packaging of delicate components. It is widely used for insulating mechanically weak or damagesusceptible points such as solder joints, wire splices and terminations.

Because it holds its expanded “roundness,” SR-350 Tubing is highly recommended for use with automatic feed equipment. The tubing is readily printable by hot-stamp or print-wheel techniques.

Shrink Ratio

SR-350 Tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness of the tubing is proportional to the degree of recovery. High expansion-ratio SR-350 Tubing is available subject to factory quotation.

Typical Properties

Standard Colors

SR-350, Class 1 flame retardant black. Special color-coded sizes are available. SR-350, Class 2 non-flame retardant clear.

Standard Packaging

Four-foot lengths. Cut pieces available subject to factory quotation.
Ordering Information

Order SR-350 by product name, size equivalent to expanded inside diameter, package type and color. Always order the largest size that will shrink snugly over the item to be covered. Example SR-350, 1/4", 4 ft., black.

Standard Sizes and Dimensions
Ordering Size
3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2

Expanded I.D.

Minimum
1,17 1,60 2,36 3,18 4,75 6,35 9,53 12,70

Recovered I.D.

Maximum
0,58 0,79 1,17 1,57 2,36 3,18 4,75 6,35

Recovered Wall

Thickness Nominal in. mm
0,51 0,51 0,51 0,51 0,64 0,64 0,76 0,76

Applicable Specification MIL-DTL-23053/6, Class 1, 2 AMS-3638, AMS-3639 UL File E-39100, E-69751

Physical

Tensile Strength
2600 PSI

Ultimate Elongation
400%

Longitudinal Change
±5%

Secant Modulus
28,000 PSI

Specific Gravity Black

Clear

Heat Aging

Elongation
336 hrs. 175°C
175%

Heat Shock

No dripping,
4 hrs. 250°C cracking,
passes mandrel
wrap test

Low Temperature Flexibility
4 hrs. No cracking

Flammability Self-extinguish

Class 1 only

Electrical

Dielectric Strength 800 V/mil Volume Resistivity 1015 ohm-cm

Chemical

Corrosive Effect Non-corrosive

Solvent Resistance
More datasheets: GSB4112312HR | SEN0177 | AS1367-BTDT-12 | AS1367-BTDT-30 | AS1367-BTDT-18 | AS1367-BTDT-45 | AS1367-BTDT-33 | FJNS3207RBU | FJNS3207RTA | DFR0484


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SR-350 1/8" BL48"BK Datasheet file may be downloaded here without warranties.

Datasheet ID: SR-350 1/8" BL48"BK 521457