MVU18-250DMFK-A

MVU18-250DMFK-A Datasheet

MVU18-250DMF-A, MVU14-250DMF-A, Multi-Stack Disconnect, Vinyl Insulated, Butted Seam

Part	Datasheet
MVU18-250DMFK-A	MVU18-250DMFK-A (pdf)

Related Parts	Information
MVU14-250DMFK-A	MVU14-250DMFK-A

PDF Datasheet Preview
Scotchlok Terminals MVU18-250DMF-A, MVU14-250DMF-A, Multi-Stack Disconnect, Vinyl Insulated, Butted Seam Data Sheet February 2008 Product Number MVU18-250DMF-A MVU14-250DMF-A Wire Range AWG 22-18 Mates with Male Tab Width W’ x Thickness 16-14 x Maximum Insulation Diameter Specifications Installation Information Wire Size Barrel Seam Maximum Voltage Rating Maximum Operating Temp Maximum Current Insulator Material Terminal Material Terminal Plating: See Table Above Butted 300 V Building Wire 221°F 105°C Same as Wire Vinyl Brass Tin Strip away the end 3/8 inch of wire insulation. Make the crimp the proper station of a recommended 3M Scotchlok Crimp Tool TH-440, TH-450 scissor style or TR-490 ratchet style hand tools. Barrel Crimp Required 1 of 2 Engineering Specification Crimp-Type Multi-Stack Disconnects shall, electrically and mechanically, connect permanently to a pre-stripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male Quick-Slide and a tongue extension to be gripped by a Female Quick-Slide in a separable, reusable manner, forming a Quick Connect Wiring Termination. The Multi-Stack Disconnect line shall offer variations in separable connections Male Quick-Slide wide , Female Quick-Slide wide and barrel variations in wire AWG size 22-18, 16-14 and construction vinyl insulated and nylon insulated with insulation grip . The tongue shall be marked with the wire range. The Separable Connection formed by the Multi-Stack Disconnect and the mating connector s may require a suitable strain relief to prevent accidental separation. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability: This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M and Scotchlok are trademarks of 3M Company. Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 FAX 800 245 0329 Please recycle. 3M 2008 All rights reserved. 78-8127-6829-5_A 2 of 2

PDF Datasheet Preview

Scotchlok Terminals

MVU18-250DMF-A, MVU14-250DMF-A, Multi-Stack Disconnect, Vinyl Insulated, Butted Seam

Data Sheet

February 2008

Product Number

MVU18-250DMF-A MVU14-250DMF-A

Wire Range AWG
22-18

Mates with Male Tab Width W’ x Thickness
16-14 x

Maximum

Insulation Diameter

Specifications Installation Information

Wire Size Barrel Seam Maximum Voltage Rating Maximum Operating Temp Maximum Current Insulator Material Terminal Material Terminal Plating:

See Table Above Butted 300 V Building Wire 221°F 105°C Same as Wire Vinyl Brass Tin

Strip away the end 3/8 inch of wire insulation. Make the crimp the proper station of a recommended 3M Scotchlok Crimp Tool TH-440, TH-450 scissor style or TR-490 ratchet style hand tools.

Barrel Crimp Required
1 of 2

Engineering Specification

Crimp-Type Multi-Stack Disconnects shall, electrically and mechanically, connect permanently to a pre-stripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male Quick-Slide and a tongue extension to be gripped by a Female Quick-Slide in a separable, reusable manner, forming a Quick Connect Wiring Termination.

The Multi-Stack Disconnect line shall offer variations in separable connections Male Quick-Slide wide , Female Quick-Slide wide and barrel variations in wire AWG size 22-18, 16-14 and construction vinyl insulated and nylon insulated with insulation grip . The tongue shall be marked with the wire range.

The Separable Connection formed by the Multi-Stack Disconnect and the mating connector s may require a suitable strain relief to prevent accidental separation.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability:

This product will be free from defects in material and manufacture at the time of purchase. 3M

MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M Company.

Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 FAX 800 245 0329

Please recycle. 3M 2008 All rights reserved. 78-8127-6829-5_A
2 of 2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MVU18-250DMFK-A Datasheet file may be downloaded here without warranties.

Datasheet ID: MVU18-250DMFK-A 520982