MP2-SS048-41S2-KR

MP2-SS048-41S2-KR Datasheet


MP2 Series

Part Datasheet
MP2-SS048-41S2-KR MP2-SS048-41S2-KR MP2-SS048-41S2-KR (pdf)
Related Parts Information
MP2-SS240-51S1-FJ MP2-SS240-51S1-FJ MP2-SS240-51S1-FJ
MP2-SS096-41S2-LR MP2-SS096-41S2-LR MP2-SS096-41S2-LR
MP2-SS096-41S2-TR30 MP2-SS096-41S2-TR30 MP2-SS096-41S2-TR30
MP2-SS144-41S2-LR MP2-SS144-41S2-LR MP2-SS144-41S2-LR
MP2-SS144-41S2-TR30 MP2-SS144-41S2-TR30 MP2-SS144-41S2-TR30
MP2-SS192-41S2-LR MP2-SS192-41S2-LR MP2-SS192-41S2-LR
MP2-SS192-41S2-TR30 MP2-SS192-41S2-TR30 MP2-SS192-41S2-TR30
PDF Datasheet Preview
3M MetPak 2-FB Stacking Socket
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail

MP2 Series
• End-to-end stackable
• Offset dual-beam contact minimizes insertion force
• High-profile/high pin count
• Ideal for parallel stacking applications
• Vertical receptacle
• Eliminates internal cabling
• Meets IEC 61076-4-104
global standard
• See Regulatory Information Appendix RIA
for chemical compliance information

Date Modified March 27, 2007

Physical

Insulation Material High Temp LCP Flammability UL 94V-0
Color Beige Contact Material Phosphor Bronze Plating Underplating 50 [ um ] Nickel Wiping Area See Ordering Information Solder Tails See Ordering Information

Electrical

Current Rating Signal A - All contacts simultaneously Insulation Resistance 103 MΩ Withstanding Voltage 1000 VAC

Environmental

Temperature Rating -55°C to +125°C Process Temperature Rating 260°C Profile per J-STD-020C

Moisture Sensitivity Level 1 per J-STD-020C

TS-1118-05 Sheet 1 of 3
3M Interconnect Solutions

MetPak is a trademark of 3M Company. * Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. IEEE .
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Stacking Socket
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail
"A" "B"

TYP.

MP2-HXXX-XXXX-XXXX

MP2 Series

ROW E D C B A

POSITION 21

MP2-SSXXX-X1XX-XXXX

MATED WITH MP2-HXXX-XXXX-XXXX
"C" TAIL LENGTH
5 ROW PRODUCT
4 ROW PRODUCT

SOLDER TAIL OR PRESS-FIT
[inch]

Tolerance Unless Noted
mm ±3
[ ] Dimensions for Reference Only

Note Refer to IEC 61076-4-104 global standard. "Press Fit" describes a contact tail having a compliant section designed to make a reliable electrical connection with a
plated through-hole PTH in a printed circuit board, typically a "back plane.”
Ordering Information

MP2 - SSXXX - X1XX -

Stacking Socket

Contact Count See Table 1

Rows 4 = 4 Rows 5 = 5 Rows

Termination Style P = Press-Fit w/Tail Cover S = Solder Tail

Tail Length See Table 2
*Contact Customer Service for information on special fill patterns.
3M Interconnect Solutions

Plating Options See Table 3

TS-1118-05 Sheet 2 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Stacking Socket
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail

MP2 Series

Table 1 - Connector & Row Lengths

Pin Count
024 048 072 096 120 144 168 192 030 060 090 120 150 180 210 240

Dim. "A" mm [inch]

Dim "B" mm [inch]

Block Rows Count

Table 2 - Tail Length

Contact-to-PC Board Tail Termination Option No.

Dim. "C"

Solder

Press-Fit*
*Compliant-Pin Tail

Plating Suffix

Press-Fit Tails*

RIA E2 & C2 apply

TG30

RIA E2 & C2 apply

TR30

RIA E2 & C2 apply

TR40B

RIA E2 & C2 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

RIA E1 & C1 apply

RIA E1 & C1 apply
*Compliant-Pin Tail

Table 3 - Plating & Regulatory

Solder Tails

Plating Composition

RIA E3 & C2 apply
µm [10 µ"] Min. Au Contact Area µm [100 µ"] Min. SnPb Tail Area µm [50 µ"] Min. Ni all over

RIA E3 & C2 apply
µm [30 µ"] Min. Au Contact Area µm [100 µ"] Min. SnPb Tail Area µm [50 µ"] Min. Ni all over
µm [3 µ"] Min. Au Contact Area

RIA E3 & C2 µm [27 µ"] Min. PdNi Contact Area
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Stacking Socket
2 mm 4/5-Row, Vertical, Solder or Press-Fit Tail

MP2 Series

TYP. "B"
"“DD”" PPLLAATTEDEDTHTRHORUUGHH-HOOLLEE l O

UUNNPPLLAATETDEDTHTRHORUGUHH-HOOLLEE

RECOMMENDED 4 ROW SOLDER TAIL PCB HOLE MOUNTING PATTERN

RECOMMENDED 4 ROW PRESS-FIT PCB HOLE MOUNTING PATTERN

Table 4 -- HOLE PLATING For TG, TG30, TR30, TR40B FINISHES ONLY

HOLE

Finished Dia. mm [in]

Cu Thickness SnPb Thickness
mm [in]
microns [µ"]

Drilled Hole Dia. mm [in]
"D" min 15 [600] max

Table 5 -- HOLE PLATING For FJ, KR, RF, LR, and PD FINISHES ONLY

Hole

Finished Dia. mm [in]

Cu Thickness mm [in]

Immersion Matte Sn Thickness
microns [µ"]

Electrolitic Au Thickness
microns [µ"]

OSP ENTEK Thickness
microns [µ"]

Drilled Hole Dia. mm [in]
- [20 - 100]
- [4 - 20]
- [8 - 20]
or 0.85mm [ #66] TW IST DRILL

UUNNPLPALTAETDEDTHTRHORUUGHHO-HLOELE

TYP.

RECOMMENDED 5 ROW SOLDER TAIL PCB HOLE MOUNTING PATTERN
3M Interconnect Solutions

RECOMMENDED 5 ROW PRESS-FIT PCB HOLE MOUNTING PATTERN

TS-1118-05 Sheet 4 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-A

CHINA

Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Name and Content of Hazardous Substances or Elements

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of ninety 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronic Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373

RIA-2217-A 3M 2007
More datasheets: DSOL-1333-24A | B39871B3570U310W3 | CYRF69103-40LFXC | 84870213 | MP2-SS240-51S1-FJ | MP2-SS096-41S2-LR | MP2-SS096-41S2-TR30 | MP2-SS144-41S2-LR | MP2-SS144-41S2-TR30 | MP2-SS192-41S2-LR


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MP2-SS048-41S2-KR Datasheet file may be downloaded here without warranties.

Datasheet ID: MP2-SS048-41S2-KR 520763