MP2-HP10-51P2-TG30

MP2-HP10-51P2-TG30 Datasheet

MP2 Series

Part	Datasheet
MP2-HP10-51P2-TG30	MP2-HP10-51P2-TG30 (pdf)

Related Parts	Information
MP2-HP10-51P2-KR	MP2-HP10-51P2-KR
MP2-HP10-51P1-TR40B	MP2-HP10-51P1-TR40B

PDF Datasheet Preview
3M MetPak 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series • Amps per contact • Early mate late break EMLB for hot swap or selective loading options • End-to-end stackable • Optional feed-through tail Press-Fit • compatible • See the Regulatory Information Appendix RIA in the “RoHS compliance” section of interconnects for compliance information RIA E1 & C1 apply Date Modified August 21, Physical Insulation Material High Temperature LCP Flammability UL 94V-0 Color Beige Contact Material Copper Alloy Plating Underplating 50 u” um] Nickel Wiping Area See Ordering Information Tails See Ordering Information Electrical Current Rating Power A per power socket contact at 70°C Insulation Resistance 103 MΩ Withstanding Voltage 1,500 VAC for 60 seconds Environmental Temperature Rating -55° C to 125° C UL File No. E68080 TS-1126-C Sheet 1 of 4 Electronic Solutions Division Interconnect Solutions MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. IEEE 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M MetPak 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series POSITION 2 POSITION 1 FOR SPECIAL MONOBLOCKS AND PIN ARRANGEMENTS CONTACT 3M SALES REPRESENTATIVE 4 ROW PRODUCT ONLY PRESENT ON SOLDER TAIL PRODUCT mm Inch Tolerance Unless Noted 0 mm ±3 Dimensions used for Reference Only "B" MATING LENGTH "A" TAIL LENGTH EDCB A ROW 5 Row Product Press-Fit Product Note Refer to IEC 61076-4-104 global standard. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole PTH in a printed circuit board, typically a “back plane.” Ordering Information Power Header Contact Count See Table 1 Rows 4 = 4 Rows 5 = 5 Rows MP2-HPXX-XXPX- Loading Pattern See Table 2 Tail Length See Table 3 Plating Options See Table 4 Termination Style P = Press-Fit TS-1126-C Sheet 2 of 4 Electronic Solutions Division Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M MetPak 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series Table 1 Contact Count No of Rows Table 2 - Mate Length Loading Pattern Code Mate length Row A Mate length Row B Mate length Row C All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled All Positions Filled Mate length Row D Mate length Row E 5-Row Prod. Only Table 3 Press-Fit Tail Termination Option No. 1 2 *Compliant-Pin Tail Dim. “A” Plating Suffix TG RIA E2 & C2 apply TG30 RIA E2 & C2 apply TR30 RIA E2 & C2 apply TR40B RIA E2 & C2 apply Plating Composition um [10 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [30 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [3 u”] Min. Au Contact Area um [27 u”] Min. PdNi Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [5 u”] Min. Hard Au Contact Area, Lubricated um [40 u”] Min. PdNi Contact Area um [4 u”] Min. Pd Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over Table 4 - Plating Suffix FJ RIA E1 & C1 apply KR RIA E1 & C1 apply RF RIA E1 & C1 apply LR RIA E1 & C1 apply PD RIA E1 & C1 apply 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M MetPak 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series MIN. "D" PLATED THRU HOLE Recommended 4 Row Press-Fit PCB Hole Mounting Pattern HOLE “D” Table 5 -- HOLE PLATING SPECIFICATION Finished Dia. mm [in] Cu Thickness min SnPb Thickness microns [µ”] 15 [600] max Drilled Hole Dia. mm [in] MIN. "D" PLATED THRU HOLE Recommended 5 Row Press-Fit PCB Hole Mounting Pattern Electronic Solutions Division Interconnect Solutions TS-1126-C Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.

PDF Datasheet Preview

3M MetPak 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail

MP2 Series
• Amps per contact
• Early mate late break EMLB for hot swap or selective loading options
• End-to-end stackable
• Optional feed-through tail Press-Fit
• compatible
• See the Regulatory Information Appendix RIA in the “RoHS compliance” section of interconnects for compliance information RIA E1 & C1 apply

Date Modified August 21,

Physical

Insulation Material High Temperature LCP

Flammability UL 94V-0 Color Beige
Contact Material Copper Alloy Plating Underplating 50 u” um] Nickel Wiping Area See Ordering Information
Tails See Ordering Information

Electrical

Current Rating Power A per power socket contact at 70°C Insulation Resistance 103 MΩ Withstanding Voltage 1,500 VAC for 60 seconds

Environmental

Temperature Rating -55° C to 125° C

UL File No. E68080

TS-1126-C Sheet 1 of 4

Electronic Solutions Division Interconnect Solutions

MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. IEEE
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail

MP2 Series

POSITION 2 POSITION 1

FOR SPECIAL MONOBLOCKS AND PIN ARRANGEMENTS CONTACT 3M SALES REPRESENTATIVE
4 ROW PRODUCT

ONLY PRESENT ON SOLDER TAIL PRODUCT
mm Inch

Tolerance Unless Noted
0 mm ±3

Dimensions used for Reference Only
"B" MATING LENGTH
"A" TAIL LENGTH

EDCB A ROW
5 Row Product

Press-Fit Product

Note Refer to IEC 61076-4-104 global standard. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical
connection with a plated through-hole PTH in a printed circuit board, typically a “back plane.”
Ordering Information

Power Header

Contact Count See Table 1

Rows 4 = 4 Rows 5 = 5 Rows

MP2-HPXX-XXPX-

Loading Pattern See Table 2

Tail Length See Table 3

Plating Options See Table 4

Termination Style P = Press-Fit

TS-1126-C Sheet 2 of 4

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail

MP2 Series

Table 1

Contact Count No of Rows

Table 2 - Mate Length

Loading Pattern Code

Mate length Row A

Mate length Row B

Mate length Row C

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

All Positions Filled

Mate length Row D

Mate length Row E
5-Row Prod. Only

Table 3

Press-Fit Tail Termination Option No.
1 2 *Compliant-Pin Tail

Dim. “A”

Plating Suffix TG RIA E2 & C2 apply TG30 RIA E2 & C2 apply TR30 RIA E2 & C2 apply

TR40B RIA E2 & C2 apply

Plating Composition um [10 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [30 u”] Min. Au Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [3 u”] Min. Au Contact Area um [27 u”] Min. PdNi Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over um [5 u”] Min. Hard Au Contact Area, Lubricated um [40 u”] Min. PdNi Contact Area um [4 u”] Min. Pd Contact Area um [100 u”] Min. SnPb Tail Area um [50 u”] Min. Ni all over

Table 4 - Plating Suffix FJ RIA E1 & C1 apply KR RIA E1 & C1 apply RF RIA E1 & C1 apply

LR RIA E1 & C1
apply

PD RIA E1 & C1
apply
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M MetPak 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail

MP2 Series

MIN.
"D" PLATED THRU HOLE

Recommended 4 Row Press-Fit PCB Hole Mounting Pattern

HOLE “D”

Table 5 -- HOLE PLATING SPECIFICATION

Finished Dia. mm [in]

Cu Thickness min

SnPb Thickness microns [µ”] 15 [600] max

Drilled Hole Dia. mm [in]

MIN.
"D" PLATED THRU HOLE

Recommended 5 Row Press-Fit PCB Hole Mounting Pattern

Electronic Solutions Division Interconnect Solutions

TS-1126-C Sheet 4 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373

Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-E
3M is a trademark of 3M Company.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MP2-HP10-51P2-TG30 Datasheet file may be downloaded here without warranties.

Datasheet ID: MP2-HP10-51P2-TG30 520719