MCH Series
Part | Datasheet |
---|---|
![]() |
MCH-068TAN-07LPH-TR30 (pdf) |
PDF Datasheet Preview |
---|
3M PC Card Header Single Slot, Low Profile, No Ejector, Alternate Footprint MCH Series • Meets PCMCIA specifications • Tapered header pins provide easy insertion • High temperature plastic insulator • ESD clips and plastic pegs for secure hold-down • See Regulatory Information Appendix RIA for chemical compliance information D Date Modified July 21, 2008 TS-1105-D Sheet 1 of 3 UE Physical Insulation Material LCP N Insulation Flammability UL 94V-0 I Insulation Color Black Contact Material Copper Alloy C521 T Plating Underplating 50 u" [ um ] Nickel Plating Wiping Area Gold flash over 27 u" [ um ] PdNi N Plating Solder Tails 100 µ" [ mm ] Tin/Lead or Reflowed Tin see ordering information Mechanical: O Durability-Office Environment 10,000 cycles minimum Insertion Force lbs. N maximum C Extraction Force lbs. N minimum and lbs. N maximum DIS Electrical Current Rating A Insulation Resistance > 5 x 109Ω at 500 VDC Withstanding Voltage 500 VRMS for 1 Minute Environmental Temperature Rating: Operating Environment -20°C to +60°C, 95% RH non-condensing Process Temperature 260°C per J-STD-020C UL File No. E68080 3M Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M PC Card Header Single Slot, Low Profile, No Ejector, Alternate Footprint MCH Series POWER PINS XXXX DETECT PINS GENERAL USE PINS V KEY V KEY PIN 35 PIN 36 CL OF CARD NUED STANDOFF HEIGHT TOTAL COMPONENT HEIGHT ON V KEY SHOWN PIN 17 SC PIN 1 PIN 67 PIN 34 MATING CL PCB TO CENTERLINE DICLCL PIN 51 CL 45° ±5° PIN 68 Ordering Information MCH - 068TAN - 07 LPH X - XX Keying Blank = volt 3 = volt Plating Suffix TR30 = PdNi w/ Au flash and Sn-Pb solder tails RIA E3 & C2 apply LL = PdNi w/ Au flash and Sn solder tails RIA E1 & C1 apply 3M Interconnect Solutions TS-1105-C Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M PC Card Header Single Slot, Low Profile, No Ejector, Alternate Footprint MCH Series SECTION W-W VIEW ROTATED 90° CLOCKWISE ED Part Description MCH-068TAN07LPHX-XX Stand-off Height [ ] PC Board to Center Line Total Component Height INU 2X O UNPLATED T l O M A M B PIN 2 N PIN 34 PIN 34 PIN 33 PIN 35 PIN 36 68X O PLATED THRU HOLE l O M A M B PIN 67 PIN 68 STANDOFF FOOTPRINT PLATED THRU HOLE NO COMPONENTS l O M A M B INSERT CARD RECOMMENDED MOUNTING HOLE LAYOUT SHOWN ON CONNECTOR SIDE OF BOARD 3M Interconnect Solutions TS-1105-C Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2 European Union RoHS D Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as E amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is U compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of N the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless I the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. T In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and N Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3 European Union RoHS O Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as C amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. S Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information DI provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-c Appendix E5 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1 China RoHS D Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. E This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration U values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. IN the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and T Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2 China RoHS ON Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. C This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration S values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls I or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this D information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-c Appendix C3 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. |
More datasheets: CL2CC | CL2WF | CL2ZC | FJN3304RBU | BD243-S | BD243A-S | BD243B-S | BD243C-S | SBR10U40CTB | GDS001 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MCH-068TAN-07LPH-TR30 Datasheet file may be downloaded here without warranties.