MCH-136TAN-23C-TR30

MCH-136TAN-23C-TR30 Datasheet


MCH Series

Part Datasheet
MCH-136TAN-23C-TR30 MCH-136TAN-23C-TR30 MCH-136TAN-23C-TR30 (pdf)
Related Parts Information
MCH-136TAN-21E-TR30 MCH-136TAN-21E-TR30 MCH-136TAN-21E-TR30
MCH-136TAN-24E3-TR30 MCH-136TAN-24E3-TR30 MCH-136TAN-24E3-TR30
MCH-136TAN-21A-TR30 MCH-136TAN-21A-TR30 MCH-136TAN-21A-TR30
PDF Datasheet Preview
3M PC Card Header

Dual Slot, No Ejector

MCH Series
• Meets PCMCIA specifications
• Tapered header pins provide easy insertion
• High temperature plastic insulator
• Stand-off height options
• Solder retention clip option for secure hold-down
• ESD clips available
• See Regulatory Information Appendix RIA
for chemical compliance information

Date Modified August 8, 2008

ED Physical

U Insulation Material LCP

IN Insulation Flammability UL 94V-0

Insulation Color Black

T Contact Material Copper Alloy

Plating Wiping Area Gold flash over 27 [ um ] PdNi

N Plating Solder Tails:
100 [ um ] Tin/Lead or Reflowed Tin See Ordering Information

O Mechanical:

Durability-Office Environment 10,000 cycles minimum

C Insertion Force lbs. N maximum

Extraction Force lbs. N minimum and lbs. N maximum

DIS Electrical

Current Rating A

Insulation Resistance > 5 x 109Ω at 500 VDC

Withstanding Voltage 500 VRMS for 1 Minute

Environmental

Temperature Rating:

Operating Environment -20°C to +60°C, 95% RH Non-condensing

Process Temperature 260°C per J-STD-020C

TS-1111-C Sheet 1 of 4

UL File No. E68080
3M Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M PC Card Header

Dual Slot, No Ejector

MCH Series

PO W ER PINS 7 8 D ET EC T P IN S

G ENERAL USE PINS

P IN 1 3 8 3 1 "G " "F " SOLDER R E TE N T C LIP
0 1 7 5

XXXX

D 2 1 5 E 5 1 8

U 2 3 4

PIN 17

PIN 34

ONT CL A
5 1 0 4 5 ° u 5 v P IN 5 1 CL P IN 68

CP IN 36

ISPIN 35

PIN 67
Ordering Information

MCH - 136TAN - XX X - XX

Insulator Body Style 21 = mm stand-off 23 = mm stand-off 24 = mm stand-off

ESD/Solder Retention Clips A = No ESD, no solder retention clips B = No ESD, solder retention clips Body style 21 only C = ESD, no solder retention clips D = ESD, solder retention clips Body style 21 only E = ESD, metal solder retention clips Body style 21 only
3M Interconnect Solutions

Plating Suffix TR30 = PdNi w/ Au flash and Sn-Pb solder tails RIA E3 & C2 apply LL = PdNi w/ Au flash and Sn solder tails RIA E1 & C1 apply

Keying Blank = volt
3 = volt

TS-1111-B Sheet 2 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M PC Card Header

Dual Slot, No Ejector

MCH Series
"B" STAND-OFF

HEIGHT

TOTAL

COMPONENT

HEIGHT "D" PC BOARD TO CENTER LINE

HARDWARE SEATING PLANE
2X "E" PC BOARD TO HARDWARE

SEATING PLANE
"C" PC BOARD

TO CENTER LINE
"A" STAND-OFF

HEIGHT

SECTION "A-A"

TINUE Part Description

Dim “A” Standoff Height

MCH-136TAN21A-XX

N MCH-136TAN21A3-XX

MCH-136TAN23A-XX MCH-136TAN23A3-XX

O MCH-136TAN24A-XX

MCH-136TAN21B3-XX MCH-136TAN21C-XX

C MCH-136TAN21C3-XX

MCH-136TAN23C-XX

IS MCH-136TAN23C3-XX

MCH-136TAN24C-XX MCH-136TAN24C3-XX

D MCH-136TAN21D-XX

Dim. “B” Standoff Height

Dim. “C” PC Board to

Center Line

Dim “D” PC Board to Center Line

Dim “E” PCB to HW Seating Line

Dim. “F” Dim. “G” See Sheet See Sheet
2 of 4 2 of 4 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

Total Component

Height

MCH-136TAN21D3-XX

MCH-136TAN21E-XX N/A
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M PC Card Header

Dual Slot, No Ejector

MCH Series

PIN 1 TOP PIN 2 TOP

PIN 35 TOP PIN 36 TOP

PIN 35 BOTTOM PIN 36 BOTTOM
-APIN 33 TOP PIN 34 TOP

PIN 67 TOP PIN 68 TOP

PIN 2 BOTTOM PIN 1 BOTTOM

E STAND-OFF FOOTPRINT U NO COMPONENTS

PIN 33 BOTTOM PIN 67 BOTTOM

PIN 34 BOTTOM PIN 68 BOTTOM
l O M A B

IN T ON INSERT CARD DISC RECOMMENDED MOUNTING HOLE PATTERN

TO PCB GROUND

PLATED THRU-HOLE
l O M A B
3M Interconnect Solutions

TS-1111-B Sheet 4 of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC.

D This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.

E “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/

U EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

IN the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability T and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. N Appendix E3 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

O amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

C Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.

IS In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability D and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-A

CHINA

Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,

D means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent

E chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

U provided by third party suppliers to 3M. IN The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in

T accordance with the product Warranty stated below. DISCON Name and Content of Hazardous Substances or Elements

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of ninety 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronic Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373

RIA-2217-A 3M 2007
More datasheets: 1760882001 | 1760873001 | 1760872001 | 1760863001 | 1760862001 | 1760913001 | 1760922001 | 1760923001 | 1760902001 | 1760812001


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MCH-136TAN-23C-TR30 Datasheet file may be downloaded here without warranties.

Datasheet ID: MCH-136TAN-23C-TR30 520631