MCH Series
Part | Datasheet |
---|---|
![]() |
MCH-136TAN-21A-TR30 (pdf) |
Related Parts | Information |
---|---|
![]() |
MCH-136TAN-23C-TR30 |
![]() |
MCH-136TAN-21E-TR30 |
![]() |
MCH-136TAN-24E3-TR30 |
PDF Datasheet Preview |
---|
3M PC Card Header Dual Slot, No Ejector MCH Series • Meets PCMCIA specifications • Tapered header pins provide easy insertion • High temperature plastic insulator • Stand-off height options • Solder retention clip option for secure hold-down • ESD clips available • See Regulatory Information Appendix RIA for chemical compliance information Date Modified August 8, 2008 ED Physical U Insulation Material LCP IN Insulation Flammability UL 94V-0 Insulation Color Black T Contact Material Copper Alloy Plating Wiping Area Gold flash over 27 [ um ] PdNi N Plating Solder Tails: 100 [ um ] Tin/Lead or Reflowed Tin See Ordering Information O Mechanical: Durability-Office Environment 10,000 cycles minimum C Insertion Force lbs. N maximum Extraction Force lbs. N minimum and lbs. N maximum DIS Electrical Current Rating A Insulation Resistance > 5 x 109Ω at 500 VDC Withstanding Voltage 500 VRMS for 1 Minute Environmental Temperature Rating: Operating Environment -20°C to +60°C, 95% RH Non-condensing Process Temperature 260°C per J-STD-020C TS-1111-C Sheet 1 of 4 UL File No. E68080 3M Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M PC Card Header Dual Slot, No Ejector MCH Series PO W ER PINS 7 8 D ET EC T P IN S G ENERAL USE PINS P IN 1 3 8 3 1 "G " "F " SOLDER R E TE N T C LIP 0 1 7 5 XXXX D 2 1 5 E 5 1 8 U 2 3 4 PIN 17 PIN 34 ONT CL A 5 1 0 4 5 ° u 5 v P IN 5 1 CL P IN 68 CP IN 36 ISPIN 35 PIN 67 Ordering Information MCH - 136TAN - XX X - XX Insulator Body Style 21 = mm stand-off 23 = mm stand-off 24 = mm stand-off ESD/Solder Retention Clips A = No ESD, no solder retention clips B = No ESD, solder retention clips Body style 21 only C = ESD, no solder retention clips D = ESD, solder retention clips Body style 21 only E = ESD, metal solder retention clips Body style 21 only 3M Interconnect Solutions Plating Suffix TR30 = PdNi w/ Au flash and Sn-Pb solder tails RIA E3 & C2 apply LL = PdNi w/ Au flash and Sn solder tails RIA E1 & C1 apply Keying Blank = volt 3 = volt TS-1111-B Sheet 2 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M PC Card Header Dual Slot, No Ejector MCH Series "B" STAND-OFF HEIGHT TOTAL COMPONENT HEIGHT "D" PC BOARD TO CENTER LINE HARDWARE SEATING PLANE 2X "E" PC BOARD TO HARDWARE SEATING PLANE "C" PC BOARD TO CENTER LINE "A" STAND-OFF HEIGHT SECTION "A-A" TINUE Part Description Dim “A” Standoff Height MCH-136TAN21A-XX N MCH-136TAN21A3-XX MCH-136TAN23A-XX MCH-136TAN23A3-XX O MCH-136TAN24A-XX MCH-136TAN21B3-XX MCH-136TAN21C-XX C MCH-136TAN21C3-XX MCH-136TAN23C-XX IS MCH-136TAN23C3-XX MCH-136TAN24C-XX MCH-136TAN24C3-XX D MCH-136TAN21D-XX Dim. “B” Standoff Height Dim. “C” PC Board to Center Line Dim “D” PC Board to Center Line Dim “E” PCB to HW Seating Line Dim. “F” Dim. “G” See Sheet See Sheet 2 of 4 2 of 4 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Total Component Height MCH-136TAN21D3-XX MCH-136TAN21E-XX N/A 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M PC Card Header Dual Slot, No Ejector MCH Series PIN 1 TOP PIN 2 TOP PIN 35 TOP PIN 36 TOP PIN 35 BOTTOM PIN 36 BOTTOM -APIN 33 TOP PIN 34 TOP PIN 67 TOP PIN 68 TOP PIN 2 BOTTOM PIN 1 BOTTOM E STAND-OFF FOOTPRINT U NO COMPONENTS PIN 33 BOTTOM PIN 67 BOTTOM PIN 34 BOTTOM PIN 68 BOTTOM l O M A B IN T ON INSERT CARD DISC RECOMMENDED MOUNTING HOLE PATTERN TO PCB GROUND PLATED THRU-HOLE l O M A B 3M Interconnect Solutions TS-1111-B Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. D This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. E “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ U EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. IN the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability T and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. N Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as O amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. C Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. IS In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability D and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, D means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent E chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information U provided by third party suppliers to 3M. IN The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in T accordance with the product Warranty stated below. DISCON Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of ninety 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 RIA-2217-A 3M 2007 |
More datasheets: 1760863001 | 1760862001 | 1760913001 | 1760922001 | 1760923001 | 1760902001 | 1760812001 | MCH-136TAN-23C-TR30 | MCH-136TAN-21E-TR30 | MCH-136TAN-24E3-TR30 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MCH-136TAN-21A-TR30 Datasheet file may be downloaded here without warranties.