HT-12-6S

HT-12-6S Datasheet


HT-11-6S thru HT-16-38

Part Datasheet
HT-12-6S HT-12-6S HT-12-6S (pdf)
Related Parts Information
HT-13-14 HT-13-14 HT-13-14
HT-13-38 HT-13-38 HT-13-38
HT-11-6S HT-11-6S HT-11-6S
HT-12-14 HT-12-14 HT-12-14
HT-13-6 HT-13-6 HT-13-6
HT-13-10 HT-13-10 HT-13-10
HT-11-10 HT-11-10 HT-11-10
HT-12-10 HT-12-10 HT-12-10
HT-11-14 HT-11-14 HT-11-14
HT-14-14S HT-14-14S HT-14-14S
HT-15-38 HT-15-38 HT-15-38
HT-16-38 HT-16-38 HT-16-38
PDF Datasheet Preview
Specialty Terminals

HT-11-6S thru HT-16-38

Ring Tongue, High Temperature, Non-Insulated, Butted Seam

Data Sheet

Product Number HT-11-6S HT-11-10 HT-11-14 HT-12-6S HT-12-10 HT-12-14 HT-13-6 HT-13-10 HT-13-14 HT-13-38 HT-14-14S HT-15-38 HT-16-38

Wire Range AWG 22-18 22-18 22-18 16-14 16-14 16-14 12-10 12-10 12-10 12-10

Stud Size
6 10 6 10 6 10

Barrel Thickness Length I.D.

Specifications

Wire Size Barrel Seam Max. Operating Temp. Max. Current Terminal Material Terminal Plating:

See Table Above Butted Same as Wire Steel Nickel

Installation Information

WARNING

Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes.

For use on stranded copper AWG wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-490 ratchet style hand tools.

Barrel Crimp Electrical

Engineering Specification

Crimp-type terminals shall, electrically and mechnically, connect to a pre-stripped end of a stranded copper wire and have a flat tongue portion with a central opening for mounting around a screw or stud.

The high temperature non-insulated, butted seam ring tongue terminal shall be nickel-plated, steel, with the tongue having a specified stud slot size 6 thru 3/8 in. and a butted seam barrel with a beveled I.D. for ease of stranded wire entry, sized for a specified AWG wire range 22-18, 16-14, 12-10, 8, 6,
3M is a trademark of 3M

IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Electrical Products Division
6801 River Place Blvd. Austin, TX 78726-9000

Litho in USA. 3M 2002 78-8126-0839-2-A
More datasheets: AOD206_030 | M44209 WH005 | M44209 WH001 | M44209 WH002 | HT-13-14 | HT-13-38 | HT-11-6S | HT-12-14 | HT-13-6 | HT-13-10


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HT-12-6S Datasheet file may be downloaded here without warranties.

Datasheet ID: HT-12-6S 520478