12600-S-08 Jack Socket Screw
Part | Datasheet |
---|---|
![]() |
12600-S-M2X55 (pdf) |
PDF Datasheet Preview |
---|
3M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified January 14, 2008 Mounting Hardware Applications - Table 1 Type Mini D Ribbon MDR Conn.’s D Sub Conn.’s D Ribbon Conn.’s Shrunk D Ribbon SDR Conn.’s *3341-1L Jack Socket Screw *3341-1S Jack Socket Screw *3341-2 Jack Socket Screw *3341-3 Jack Socket Screw *3341-4 Jack Socket Screw *3341-10 Jack Socket Screw *3341-13 Jack Socket Screw *3341-16 Jack Socket Screw *3341-17 Jack Socket Screw *3341-25 Jack Socket Screw *3341-30 Jack Socket Screw *3341-31 Jack Socket Screw *3341-32 Jack Socket Screw *3341-35 Jack Socket Screw *3341-36 Jack Socket Screw 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware Jacket Socket Screws 3M Part Number 3341-1L Kit Contents 2 - Jack Sockets 4 - Spacers Thick 2 - Lock Washers 2 - 4-40 Nuts Material Steel Finish Zinc with Clear Chromate Screw / Socket Thread Size #4-40 / #4-40 Recommended Max. Torque inch•lbf N•m] Quantity See Kit Contents 3M Part Number Kit Contents: 3341-1S 2 - Jack Sockets 4 - Spacers Thick 2 - Lock Washers Material Steel 2 - 4-40 Nuts Finish Zinc with Clear Chromate Screw / Socket Thread Size #4-40 / #4-40 Recommended Max. Torque inch•lbf N•m] Quantity See Kit Contents 3M Part Number 3341-2 Kit Contents 2 - Jack Sockets 2 - Lock Washers 2 - 4-40 Nuts Material Steel Finish Zinc with Clear Chromate Screw / Socket Thread Size #4-40 / #4-40 Recommended Max. Torque inch•lbf N•m] Quantity See Kit Contents #4-40 Thread #4-40 Thread #4-40 Thread 3M Part Number 3341-3 IEEE-488-Type Kit Contents 2 - Jack Sockets 4 - Spacers Thick 2 - Lock Washers 2 - 4-40 Nuts Material Steel Finish Black Oxide Screw / Socket Thread Size #4-40 / M3.5 Recommended Max. Torque inch•lbf N•m] Quantity See Kit Contents #4-40 Thread 3M Part Number 3341-4 Kit Contents 2 - Jack Sockets 4 - Spacers Thick 2 - Lock Washers 2 - 4-40 Nuts Material Steel Finish Zinc with Clear Chromate Screw / Socket Thread Size #4-40 /#4-40 #4-40 Thread 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware 3M Part Number 3341-10 Material Stainless Steel Screw / Socket Thread Size M2.5 / M2.5 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3341-13 Material Stainless Steel Screw / Socket Thread Size M2.5 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3341-16 Material Stainless Steel Screw / Socket Thread Size #4-40 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3341-17 Material Stainless Steel Screw / Socket Thread Size #4-40 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2.5 Thread Thread Locking Material M2.5 Thread Thread Locking Material #4-40 Thread Thread Locking Material #4-40 Thread Thread Locking Material M2.5 Thread x Deep Ø #4-40 Thread x Deep #4-40 Thread x Deep Ø #4-40 Thread x Deep 3M Part Number 3341-25 Material Stainless Steel Screw / Socket Thread Size M2.5 / M2 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2.5 Thread Thread Locking Material M2 Thread x Deep Electronic Solutions Division Interconnect Solutions TS-0142-E Sheet of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware 3M Part Number 3341-30 Material Stainless Steel Screw / Socket Thread Size #4-40 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces #4-40 Thread Thread Locking Material #4-40 Thread x Deep 3M Part Number 3341-31 Material Stainless Steel Screw / Socket Thread Size M2.5 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3341-32 Material Stainless Steel Screw / Socket Thread Size M2.5 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2.5 Thread Thread Locking Material M2.5 Thread 3M Part Number 3341-35 #4-40 Thread x Deep Ø M2.5 Thread X Deep Material Stainless Steel Screw / Socket Thread Size M2.5 / #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2.5 Thread 3M Part Number 3341-36 Material Stainless Steel Screw / Socket Thread Size M2.5 / M2.5 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2.5 Thread Electronic Solutions Division Interconnect Solutions Thread Locking Material #4-40 Thread x Deep Thread Locking Material M2.5 Thread x Deep TS-0142-E Sheet of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware JackScrew Kits 3M Part Number 3342-1 Material Steel Finish Zinc with Clear Chromate Thread size #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 2 Each 3M Part Number 3342-2 Material Steel Finish Zinc with Clear Chromate Thread size #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 2 Each Clip #4-40 Thread Spacer #4-40 Thread 3M Part Number 3342-3 Material Steel Finish Zinc with Clear Chromate Thread size #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 2 Each #4-40 Thread #4-40 Thread 3M Part Number 3342-4 Material Steel Finish Zinc with Clear Chromate Thread size #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 2 Each #4-40 Thread Electronic Solutions Division Interconnect Solutions TS-0142-E Sheet of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware Board Lock Screws Use to attach connector to printed circuit board. Not for use for panel mounting. 3M Part Number 3344-3 Material Steel Finish Nickel Plated Thread size M2.5 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3344-4 Material Steel Finish Nickel Plated Thread size #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces NOM. NOM. Ø MAX Ø MAX 3M Part Number 3344-26 Material Steel Finish Zinc Thread size M2.6 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3344-36 Material Steel Finish Zinc Thread size M2.5 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3M Part Number 3344-44 Material Steel Finish Zinc Thread size #4-40 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces 3 Electronic Solutions Division Interconnect Solutions NOM. NOM. NOM. Ø MAX Ø MAX Ø MAX TS-0142-E Sheet of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware Bail Mount Kits for D Ribbon Connectors 3475-1 3475-4 Plastic Connector Mounted to Front of Panel 3475-5 Plastic & Metal Faced Connectors Mounted to Rear of Panels Plastic & Metal Faced Connectors Mounted to Rear of Panels Kits Contain 2 ea. Ball Assy. Screw - 4-40 x RND HD SLTD Nut - #4-40 UNC Washer - Lock-split Detail A Contact Quantity 14 24 36 50 Mating Connectors Junction Shell Strain Relief Plug Socket Plastic 3572-100X 3573-100X 3485-1800Y 3448-60 3548-100X 3549-100X 3485-1700Y 3448-61 3366-100X 3367-100X 3485-2800Y 3448-62 3564-100X 3565-100X 3485-2500Y 3448-63 Pull-Tab 3490-2 3490-2 3490-3 3490-5 Options X = mounting style Y = “F” for flat cable, “R” for round cable Inch [mm] Tolerance Unless Noted Inch ± ± ± [ ] Dimensions for Reference only TS-0142-E Sheet of 9 Electronic Solutions Division Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware Jack Socket Screws Use to attach connector to panel or chassis. Not for use for PC board mounting. 3M Part Number 12600-S-08 For mm] Panel Thickness Material Steel Finish Nickel Plated Screw / Socket Thread Size M2 / M2 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2 Thread Thread Locking Material Panel Thickness Ø Max M2 Thread x Deep 3M Part Number 12600-S-10 For mm] Panel Thickness Material Steel Finish Nickel Plated Screw / Socket Thread Size M2 / M2 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2 Thread Thread Locking Material Panel Thickness Ø Max M2 Thread x Deep 3M Part Number 12600-S-12 For mm] Panel Thickness Material Steel Finish Nickel Plated Screw / Socket Thread Size M2 / M2 Recommended Max. Torque inch•lbf N•m] Package Size 200 Pieces M2 Thread Thread Locking Material Panel Thickness Ø Max M2 Thread x Deep Board Lock Screw Use to attach connector to printed circuit board. Not for use for panel mounting. 3M Part Number 12600-S-M2x55 Material Steel Finish Zinc Thread size M2 Recommended Max. Torque inch•lbf N•m] Package Size 600 Pieces0 Electronic Solutions Division Interconnect Solutions TS-0142-E Sheet of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M I/O Connector Mounting Options and Hardware Mounting Hardware Guide D Sub Connectors Selection Guide - 9 to 37 Position D Sub Connectors To mount a connector to a panel, select the correct Jack Socket Kit from table To secure a mating connector to a panel mounted connector, select the correct Jack Screw Kit from table To secure two connectors together in a mid-span application where no panel exists, select both the Jack Socket Kit and Jack Screw Kit from table Panel Thickness 1/16 3/32 1/8 Front Mount Spacers 3341-1L 3341-1L 3341-4 Rear Mount Spacers 3341-1L 3341-1S 3341-1S Note Spacers Placed Under Head of Jack Sockets Junction Shell ----3485-2X00 3357-41XX 3357-51XX 3357-65XX 3357-92XX Jack Screw Jack Socket Spacers 3342-1 ----- 3341-1L 3342-2 3341-4 3342-2 3341-4 3342-2 3341-4 Supplied ----- 3341-4 Supplied or 3341-7 3341-1L Notes Jack Sockets used for MidSpan Applications. Spacers Placed Under Head of Jack Screws. Selection Guide - 50 Position D Sub Connectors Mounting Options Using 3357-9250 Junction Shell & 3505-62 Latch Bracket 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-D Appendix E5 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-D Appendix C3 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 Please recycle. Printed in USA. 3M All rights reserved. RIA-2217B-D 3M is a trademark of 3M Company. |
More datasheets: 74ACTQ04PC | 74ACTQ04SC | M1463 WH005 | M1463 WH002 | M1463 WH001 | 18072ACU | NX4025DA-16.000000MHZ-B5 | FJX3004RTF | 74VCX162827MTD | 74VCX162827MTDX |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 12600-S-M2X55 Datasheet file may be downloaded here without warranties.