98044043721

98044043721 Datasheet

Part	Datasheet
98044043721	98044043721 (pdf)

PDF Datasheet Preview
VIKUITI DURABLE QUICK CLEAN FILM APPLICATION INSTRUCTIONS LCD PANEL APPLICATION TOOLS Soft Durometer Roller DQC FILM shown liner side down Damaged Polarizing Film Metal Bezel Width of Film Stylus for hand held devices or similar Tab ‘B’ Brand Tape customer applied at time of use PEEL DIRECTION Place film, liner side down, onto LCD panel, and center within metal bezel. Holding film firmly in place with one hand, remove liner from tab and adhere tab A to metal bezel. Check film alignment realign if necessary. Then place tab Brand Tape on the top surface of the film. Raise DQC film and liner by gently lifting up tab 'B'. Use caution to grab tab only, not the film. Raise film high enough to allow liner to be removed. Grip tab 'C' firmly with free hand and gently pull in direction of arrow 'D' to separate liner from DQC adhesive. Pull slowly and gently to advance separation of liner along tab edge, before pulling toward tab edge. Relax film slightly allowing tab edge to come close to LCD panel, but not touch. With free hand, use roller to laminate film into place in one continuous sweep. Remove tabs and Use plastic stylus to complete lamination along edges as necessary. Clean with acetone as necessary. CAUTION Remove liner in one continuous motion without stopping Cleanroom lamination strongly recommended. 3M does on occasion provide internal 3M test data or recommendations as a service to our customers. 3M does not certify the accuracy or validity of this information and 3M is not responsible for interpretation of or use of the provided information. Customers should not rely on this information as a basis for determining if a product is fit for a particular application or will have particular attributes. The information provided is made available on an “as is” basis. 3M makes no warranty, express or implied, related to this information. 3M shall not be liable for any incidental, special, or consequential damages relating to the use or inability to use this information, regardless of the legal theory asserted.

PDF Datasheet Preview

VIKUITI DURABLE QUICK CLEAN FILM APPLICATION INSTRUCTIONS

LCD PANEL

APPLICATION TOOLS

Soft Durometer

Roller

DQC FILM
shown liner side down

Damaged Polarizing Film

Metal Bezel

Width of Film

Stylus for hand held devices
or similar

Tab ‘B’ Brand Tape customer applied at time of use

PEEL DIRECTION

Place film, liner side down, onto LCD panel, and center within metal bezel. Holding film firmly in place with one hand, remove liner from tab and adhere tab A to metal bezel. Check film alignment realign if necessary. Then place tab Brand Tape on the top surface of the film.

Raise DQC film and liner by gently lifting up tab 'B'. Use caution to grab tab only, not the film. Raise film high enough to allow liner to be removed. Grip tab 'C' firmly with free hand and gently pull in direction of arrow 'D' to separate liner from DQC adhesive. Pull slowly and gently to advance separation of liner along tab edge, before pulling toward tab edge.

Relax film slightly allowing tab edge to come close to LCD panel, but not touch. With free hand, use roller to laminate film into place in one continuous sweep. Remove tabs and Use plastic stylus to complete lamination along edges as necessary. Clean with acetone as necessary.

CAUTION Remove liner in one continuous motion without stopping

Cleanroom lamination strongly recommended.
3M does on occasion provide internal 3M test data or recommendations as a service to our customers. 3M does not certify the accuracy or validity of this information and 3M is not responsible for interpretation of or use of the provided information. Customers should not rely on this information as a basis for determining if a product is fit for a particular application or will have particular attributes. The information provided is made available on an “as is” basis. 3M makes no warranty, express or implied, related to this information. 3M shall not be liable for any incidental, special, or consequential damages relating to the use or inability to use this information, regardless of the legal theory asserted.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 98044043721 Datasheet file may be downloaded here without warranties.

Datasheet ID: 98044043721 520010