DIN-096RPC-DPW2-G30

DIN-096RPC-DPW2-G30 Datasheet

3M DIN R-Form Plug

Part	Datasheet
DIN-096RPC-DPW2-G30	DIN-096RPC-DPW2-G30 (pdf)

Related Parts	Information
DIN-064RPB-S110-TR	DIN-064RPB-S110-TR
DIN-064RPB-DPS-TR	DIN-064RPB-DPS-TR
DIN-096RPC-DPS-TG30	DIN-096RPC-DPS-TG30
DIN-064RPB-R1-TR	DIN-064RPB-R1-TR
DIN-096RPC-DPS-TR	DIN-096RPC-DPS-TR
DIN-096RPC-DPW1-RR	DIN-096RPC-DPW1-RR
DIN-150RPC-S1-TR	DIN-150RPC-S1-TR
DIN-150RSC-RR1L-TR	DIN-150RSC-RR1L-TR
DIN-150RSC-SR1-TR	DIN-150RSC-SR1-TR
DIN-064RPB-DPW1-TR	DIN-064RPB-DPW1-TR
DIN-032RSB-SR1-TG30	DIN-032RSB-SR1-TG30
DIN-096RPC-DPW1-TR	DIN-096RPC-DPW1-TR
DIN-096RPC-R1-TR	DIN-096RPC-R1-TR
DIN-048RPC-S1-TR	DIN-048RPC-S1-TR
DIN-048RPC-S1-TG30	DIN-048RPC-S1-TG30
DIN-032RPB-S1-TR	DIN-032RPB-S1-TR
DIN-120RPC-S1-TR	DIN-120RPC-S1-TR
DIN-096RPC-S1-TG30	DIN-096RPC-S1-TG30
DIN-096RPC-W-TR	DIN-096RPC-W-TR
DIN-150RPC-R1-TR	DIN-150RPC-R1-TR
DIN-096RPC-S1-TR	DIN-096RPC-S1-TR
DIN-150RPC-S110-TG30	DIN-150RPC-S110-TG30
DIN-064RPB-S1-TR	DIN-064RPB-S1-TR
DIN-120RPC-DPS-TR	DIN-120RPC-DPS-TR
DIN-120RPC-DPW1-RR	DIN-120RPC-DPW1-RR

PDF Datasheet Preview
3M DIN R-Form Plug Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series • Early mate late break EMLB grounding contacts for hot swapping • Select load capability • Expanded pin counts • Optional press-fit or solder tail termination • Optional retention clips • Mates with R-form and C-form sockets • See Regulatory Information Appendix RIA for chemical compliance information Date Modified February 20, TS-1133-D ONTIcNeUdEbDty2307 Physical Insulation Material Glass Filled Polyester PCT Flammability UL 94V-0 Color Gray or Black Contact Material Copper Alloy Plating Underplating 50 u” [ um ] Min. Nickel Wiping Area See Ordering Information Termination Area See Ordering Information Marking Part Number and Date Code C la ee Electrical IS p h Contact Resistance 20 mΩ Max. e Current Rating A 30°C T-rise above ambient D S Insulation Resistance 1 x MΩ min. at 500 VDC R Withstanding Voltage 1 x VAC for 1 minute ch Environmental e Temperature Rating -55°C to +125°C T Temperature Rating 260°C per J-STD-020C Sheet 1 of 4 Moisture Sensitivity Level 1 per J-STD-020C Electronic Solutions Division Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M DIN R-Form Plug Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series POSITION A1 PRESS-FIT OR SOLDER TAIL E C NU y 7 E TI d b 30 FOR SPECIAL PIN ARRANGEMENTS N e 2 CONTACT 3M SALES REPRESENTATIVES C TAIL LENGTH S1 MATE LENGTH S110 MATE LENGTH WITH OR WITHOUT RETENTION CLIP CO lac et e Au FINISH IS p h FeedThru/WireWrap W, DPWI and DPW2 with e plating finish selected from Table 3, S with precious metal plated on both ends. D R ch Ordering Information DIN - XXX RPX - XXXX - XXXX e Contact Quantity See Table T Contact Loading Pattern: Inch [mm] Tolerance Unless Noted Inch [ ] Dimensions for Reference only A = A Row only Plating and Insulator Color Options: B = Rows A & C Filled See Table 3 C = Rows A, B, & C Filled D = Rows A & B Filled E = B Row only Termination Options See Table 2 TS-1133-D Sheet of 4 Electronic Solutions Division Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M DIN R-Form Plug Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series Table 1 Contact Load Quantity Pattern D 100 E 050 U Solder Termination Option No y 7 R1 N S1 I b 0 S110 W Press-fit Termination Option No T d 3 DPS DPW1 N e 2 DPW2 O c t Plating Suffix C la e TG30 Insulator Color Gray Press-Fit Terminations RIA E2 & C2 apply IS p he TR Gray RIA E2 & C2 apply D e S RR Gray RIA E2 & C2 apply R ch HM Gray RIA E1 & C1 apply Te MH Black RIA E1 & C1 apply Table 2 DIM “C” in mm Comments with retention clips Table 3 Solder Tail Terminations RIA E3 & C2 apply RIA E3 & C2 apply RIA E1 & C1 apply Plating Composition 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M DIN R-Form Plug Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series TYP. -B.200 l O M A B C OF PLATED THRU HOLE l O M A B C U y 7 RECOMMENDED MOUNTING HOLE PATTERN TIN d b 30 Hole N e 2 “F” Drilled Hole Dia. In mm Hole Plating Table For TG, TR, RR Press-Fit Leads Cu Thickness in mm SnPb Thickness µin µm Finished Dia. In mm - - CO lac et Hole e “F” Drilled Hole Dia. In mm Hole Plating Table For TG, TR, RR Solder Tail Leads Cu Thickness in mm SnPb Thickness µin µm Finished Dia. In mm - - IS ep h Hole Plating Table For MH, HS, KT Press-Fit Leads D S Hole Drilled Hole Dia. In mm Cu Thickness in mm Immersion Whisker Mitigating Matte Sn Thickness uin um R h “F” #57 OR 1.10mm Twist Drill 20 - 100 - Finished Dia. In mm - - Tec Hole Drilled Hole Dia. In mm Hole Plating Table For MH, HS, KT Solder Tail Leads Cu Thickness in mm Immersion Matte Sn Thickness uin um Finished Dia. In mm “F” Electronic Solutions Division Interconnect Solutions TS-1133-D Sheet of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and D Buyer’s exclusive remedy will be in accordance with the Warranty stated below. E Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as U amended by EU Commission Decision 2005/618/EC. y 7 This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is N compliant by exemption under EU Commission Decision 2005/747/EC. I b 0 “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless T d 3 the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information N e 2 represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. O c t In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. C la e Appendix E3 European Union RoHS e Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as IS p h amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. e S Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information D provided by third party suppliers to 3M. R h In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and c Buyer’s exclusive remedy will be in accordance with the Warranty stated below. e Appendix E4 European Union RoHS T Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-D Appendix E5 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. D CHINA Appendix C1 China RoHS E Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. U This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means y 7 that the product or part does not contain any of the following substances in excess of the following maximum concentration N values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls I b 0 or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this T d 3 information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. N e 2 In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CO lac et Appendix C2 China RoHS e Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. IS p h This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that e the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration S values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls D R or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this h information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. c The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with e 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the T product Warranty stated below. RIA-2217B-D Appendix C3 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. DISCROeNphlTaIScNheUedEebDty2307 ImportantNotice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness c is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

PDF Datasheet Preview

3M DIN R-Form Plug

Inverse Mount, Vertical, Solder Tail or Press-Fit Termination

DIN 41612 Series
• Early mate late break EMLB grounding contacts for hot swapping
• Select load capability
• Expanded pin counts
• Optional press-fit or solder tail termination
• Optional retention clips
• Mates with R-form and C-form sockets
• See Regulatory Information Appendix RIA for
chemical compliance information

Date Modified February 20,

TS-1133-D

ONTIcNeUdEbDty2307 Physical

Insulation Material Glass Filled Polyester PCT

Flammability UL 94V-0 Color Gray or Black
Contact Material Copper Alloy Plating Underplating 50 u” [ um ] Min. Nickel Wiping Area See Ordering Information Termination Area See Ordering Information Marking Part Number and Date Code

C la ee Electrical IS p h Contact Resistance 20 mΩ Max. e Current Rating A 30°C T-rise above ambient D S Insulation Resistance 1 x MΩ min. at 500 VDC R Withstanding Voltage 1 x VAC for 1 minute
ch Environmental e Temperature Rating -55°C to +125°C T Temperature Rating 260°C per J-STD-020C

Sheet 1 of 4

Moisture Sensitivity Level 1 per J-STD-020C

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M DIN R-Form Plug

Inverse Mount, Vertical, Solder Tail or Press-Fit Termination

DIN 41612 Series

POSITION A1

PRESS-FIT OR SOLDER TAIL

E C NU y 7 E

TI d b 30 FOR SPECIAL PIN ARRANGEMENTS N e 2 CONTACT 3M SALES REPRESENTATIVES

C TAIL LENGTH

S1 MATE LENGTH

S110 MATE LENGTH

WITH OR WITHOUT RETENTION CLIP

CO lac et e Au FINISH

IS p h FeedThru/WireWrap W, DPWI and DPW2 with e plating finish selected from Table 3, S with precious metal plated on both ends.
D R ch Ordering Information

DIN - XXX RPX - XXXX - XXXX
e Contact Quantity

See Table

T Contact Loading Pattern:

Inch [mm] Tolerance Unless Noted

Inch
[ ] Dimensions for Reference only

A = A Row only

Plating and Insulator Color Options:

B = Rows A & C Filled

See Table 3

C = Rows A, B, & C Filled

D = Rows A & B Filled

E = B Row only

Termination Options See Table 2

TS-1133-D Sheet of 4

Electronic Solutions Division Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M DIN R-Form Plug

Inverse Mount, Vertical, Solder Tail or Press-Fit Termination

DIN 41612 Series

Table 1

Contact

Load

Quantity Pattern

D 100

E 050

U Solder Termination Option No y 7 R1 N S1 I b 0 S110

W Press-fit Termination Option No

T d 3 DPS

DPW1

N e 2 DPW2

O c t Plating

Suffix

C la e TG30

Insulator Color

Gray

Press-Fit Terminations

RIA E2 & C2 apply

IS p he TR

Gray

RIA E2 & C2 apply

D e S RR

Gray

RIA E2 & C2 apply

R ch HM

Gray

RIA E1 & C1 apply

Te MH

Black

RIA E1 & C1 apply

Table 2 DIM “C” in mm

Comments with retention clips

Table 3 Solder Tail Terminations RIA E3 & C2 apply

RIA E3 & C2 apply

RIA E1 & C1 apply

Plating Composition
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M DIN R-Form Plug

Inverse Mount, Vertical, Solder Tail or Press-Fit Termination

DIN 41612 Series

TYP.
-B.200
l O M A B C

OF PLATED THRU HOLE
l O M A B C

U y 7 RECOMMENDED MOUNTING HOLE PATTERN

TIN d b 30 Hole N e 2 “F”

Drilled Hole Dia. In mm

Hole Plating Table For TG, TR, RR Press-Fit Leads

Cu Thickness in mm

SnPb Thickness µin µm

Finished Dia. In mm - -

CO lac et Hole e “F”

Drilled Hole Dia. In mm

Hole Plating Table For TG, TR, RR Solder Tail Leads

Cu Thickness in mm

SnPb Thickness µin µm

Finished Dia. In mm - -

IS ep h Hole Plating Table For MH, HS, KT Press-Fit Leads

D S Hole

Drilled Hole Dia. In mm

Cu Thickness in mm

Immersion Whisker Mitigating Matte Sn Thickness uin um

R h “F”
#57 OR 1.10mm Twist Drill
20 - 100 -

Finished Dia. In mm - -

Tec Hole

Drilled Hole Dia. In mm

Hole Plating Table For MH, HS, KT Solder Tail Leads

Cu Thickness in mm

Immersion Matte Sn Thickness uin um

Finished Dia. In mm
“F”

Electronic Solutions Division Interconnect Solutions

TS-1133-D Sheet of 4
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect

EUROPE Appendix E1 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

D Buyer’s exclusive remedy will be in accordance with the Warranty stated below. E Appendix E2 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

U amended by EU Commission Decision 2005/618/EC. y 7 This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is N compliant by exemption under EU Commission Decision 2005/747/EC. I b 0 “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

T d 3 the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information N e 2 represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. O c t In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

C la e Appendix E3 European Union RoHS e Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as IS p h amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
e S Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information D provided by third party suppliers to 3M. R h In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and c Buyer’s exclusive remedy will be in accordance with the Warranty stated below. e Appendix E4 European Union RoHS T Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-D

Appendix E5 European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

D CHINA

Appendix C1 China RoHS

E Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

U This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means y 7 that the product or part does not contain any of the following substances in excess of the following maximum concentration N values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls I b 0 or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this T d 3 information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. N e 2 In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CO lac et Appendix C2 China RoHS e Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

IS p h This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that e the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration S values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls D R or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this h information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. c The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
e 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the T product Warranty stated below.

RIA-2217B-D

Appendix C3 China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

DISCROeNphlTaIScNheUedEebDty2307 ImportantNotice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
c is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DIN-096RPC-DPW2-G30 Datasheet file may be downloaded here without warranties.

Datasheet ID: DIN-096RPC-DPW2-G30 519976