70001203648

70001203648 Datasheet

Part	Datasheet
70001203648	70001203648 (pdf)

Related Parts	Information
70001203267	70001203267
70001200073	70001200073

PDF Datasheet Preview
3M Specular Film Protected - D50F Technical Data Sheet Release A, January 2014 Product Characteristics Typical values for SFP-D50F shown below are based on test data deemed reliable but not warranted, except for those values identified in the Warranted Characteristics section. Physical Characteristic Total Thickness with Premask Film only Premask Product Description 3MTM Specular Film - Protected D50F “SFP-D50F” or “Product” consists of the next generation of 3M’s high performance ultra-high reflectivity film, which is greater than reflective over the full visible spectrum and all incident angles. SFP-D50F is specially formulated to provide significantly increased lifetime when used in high intensity LED light engines over the standard SFP product. The Product also shows significant lifetime improvement over the standard SFP product for UV irradiance stability. A protective coating on the premask side provides abrasion resistance to allow for mild cleaning. Construction Electrical Dielectric Strength Optical Photopic Reflectivity Reflected Color Shift CIE a, b CIE u, v Value in mm, mils in mm, mils in mm, mils 100% polymeric Test Micrometer N/A ± kV ASTM D257/D149 ASTM E1164/E308 0 ± 2 unit ASTM E1164/E308 4000K LED or D65, 2° Observer Recommended End Uses SFP-D50F is particularly well suited as a cavity reflector applique for planar and conical surfaces. The Product is available as a sheet kit and as custom cut shapes. Key Attributes • Superior specular reflectivity at • UV and high intensity LED irradiance stability • Abrasion resistant coating • Nonconductive 100% polymeric film • Cut to custom shapes Operating Temperature Range Up to 105°C. Shrinkage At Operating Temperature Characteristic 105°C, 15 mins Value Test Environmental Performance Optical and physical properties stable under these test conditions: Cycle Cold Temperature Hot Temperature/Dry Hot Temperature/Humid Thermal Shock Total Reflectivity Color Shift Environment/Duration -40°C, 1000 hrs 100°C, 1000 hrs 65°C/95% RH, 1000 hrs -40°C to 85°C, 100 cycles, 1 hour dwell shift

PDF Datasheet Preview

3M Specular Film Protected - D50F

Technical Data Sheet

Release A, January 2014

Product Characteristics

Typical values for SFP-D50F shown below are based on test data deemed reliable but not warranted, except for those values identified in the Warranted Characteristics section.

Physical

Characteristic Total Thickness with Premask Film only

Premask

Product Description
3MTM Specular Film - Protected D50F “SFP-D50F” or “Product” consists of the next generation of 3M’s high performance ultra-high reflectivity film, which is greater than reflective over the full visible spectrum and all incident angles. SFP-D50F is specially formulated to provide significantly increased lifetime when used in high intensity LED light engines over the standard SFP product. The Product also shows significant lifetime improvement over the standard SFP product for UV irradiance stability.

A protective coating on the premask side provides abrasion resistance to allow for mild cleaning.

Construction Electrical

Dielectric Strength

Optical Photopic Reflectivity Reflected Color Shift CIE a*, b* CIE u, v

Value
in mm, mils
in mm, mils
in mm, mils
100% polymeric

Test Micrometer N/A
± kV

ASTM D257/D149

ASTM E1164/E308
0 ± 2 unit

ASTM E1164/E308 4000K LED or D65, 2° Observer

Recommended End Uses

SFP-D50F is particularly well suited as a cavity reflector applique for planar and conical surfaces. The Product is available as a sheet kit and as custom cut shapes.

Key Attributes
• Superior specular reflectivity at
• UV and high intensity LED irradiance stability
• Abrasion resistant coating
• Nonconductive 100% polymeric film
• Cut to custom shapes

Operating Temperature Range Up to 105°C.

Shrinkage At Operating Temperature

Characteristic 105°C, 15 mins

Value

Test

Environmental Performance

Optical and physical properties stable under these test conditions:

Cycle

Cold Temperature Hot Temperature/Dry Hot Temperature/Humid Thermal Shock Total Reflectivity Color Shift

Environment/Duration
-40°C, 1000 hrs 100°C, 1000 hrs
65°C/95% RH, 1000 hrs -40°C to 85°C, 100 cycles, 1 hour dwell shift

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 70001203648 Datasheet file may be downloaded here without warranties.

Datasheet ID: 70001203648 519865