CP-221 3/64" BL1000'

CP-221 3/64" BL1000' Datasheet


CP-221 Tubing

Part Datasheet
CP-221 3/64" BL1000' CP-221 3/64" BL1000' CP-221 3/64" BL1000' (pdf)
Related Parts Information
CP-221 1" BL100' CP-221 1" BL100' CP-221 1" BL100'
CP-221 2" BL100' CP-221 2" BL100' CP-221 2" BL100'
CP-221 1 1/2"BL 100' CP-221 1 1/2"BL 100' CP-221 1 1/2"BL 100'
CP-221 3/4" BL200' CP-221 3/4" BL200' CP-221 3/4" BL200'
CP-221 1/2" BL200' CP-221 1/2" BL200' CP-221 1/2" BL200'
CP-221 1/4" BL200' CP-221 1/4" BL200' CP-221 1/4" BL200'
CP-221 3/16" BL250' CP-221 3/16" BL250' CP-221 3/16" BL250'
CP-221 3/32" BL500' CP-221 3/32" BL500' CP-221 3/32" BL500'
CP-221 1/16" BL1000' CP-221 1/16" BL1000' CP-221 1/16" BL1000'
CP-221 1/8" BL500' CP-221 1/8" BL500' CP-221 1/8" BL500'
CP-221 3/8" BL200' CP-221 3/8" BL200' CP-221 3/8" BL200'
Q47600 Q47600 Q47600
PDF Datasheet Preview
CP-221 Tubing

General Purpose Polyolefin

Data Sheet

Product Description
3M CP-221 Tubing, rated at 125°C 257°F , is mechanically tough and provides an economical combination of electrical insulation, flame retardance and chemical properties. In comparison with vinyl tubings, CP-221 Tubing offers higher continuous operating temperature, reduced longitudinal shrinkage, extended shelf-life and superior conformity characteristics.

CP-221 Tubing is rated for continuous operation from to 135°C 257°F and withstands higher temperatures for short periods. It is available in standard sizes from 3/64inch to 2-inch expanded diameter and is readily markable. Minimum shrink temperature for CP-221 Tubing is 121°C 250°F .

CP-221 Tubing is recommended as a general purpose heat-shrinkable tubing for new commercial applications as well as for upgrading existing applications where other types of tubings are now used.

Shrink Ratio

CP-221 Tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness of the tubing is proportional to the degree of recovery. High expansion-ratio CP-221 Tubing is available subject to factory quotation.

Standard Color

Black. Other colors available subject to factory quotation.

Standard Packaging

Spools. Cut pieces available subject to factory quotation.
Ordering Information

Order CP-221 Tubing in the size equivalent to the expanded inside diameter required. Always order the largest size that will shrink-fit snugly over the item to be covered. Example CP-221, 3/16", black, spools.

Standard Sizes and Dimensions
Ordering Size
3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1/2

Expanded I.D.

Minimum
1,19 1,60 2,38 3,18 4,76 6,35 9,53 12,70 19,05 25,40 38,10 50,80

Recovered I.D.

Maximum
0,58 0,79 1,19 1,57 2,38 3,18 4,76 6,35 9,53 12,20 19,05 25,41

Recovered Wall

Thickness Nominal in. mm
0,41 0,43 0,51 0,51 0,51 0,64 0,64 0,64 0,76 0,89 1,02 1,14

Typical Properties

Physical

Tensile Strength
1800 PSI

Ultimate Elongation
400%

Longitudinal Change
±5%

Secant Modulus
30,000 PSI

Specific Gravity

Heat Aging

Elongation
168 hrs. 175°C
150%

Heat Shock

No dripping,
4 hrs. 225°C or cracking

Low Temperature Flexibility
4 hrs. No cracking

Electrical

Dielectric Strength 550 V/mil Volume Resistivity 1014 ohm-cm

Chemical

Corrosion Resistance Copper mirror

Solvent Resistance Tensile Strength Dielectric Strength

Water Absorption

Noncorrosive
1000 PSI 400 V/mil

Technical information provided consists of typical product data and should not be used for specification purposes. Unless otherwise noted, all tests are performed at room temperature.

Limited Warranty 3M expressly warrants that for a period of ninety days from the date of purchase, 3M static control products will be free of defects in materials parts and workmanship labor . Defects occurring during the warranty period will be repaired or products will be replaced at 3M’s option and expense, if 3M receives notice during the warranty period. Defective products must be returned to 3M with proof of purchase date.
More datasheets: 1-NPO/603-1332 | CP-221 1" BL100' | CP-221 2" BL100' | CP-221 1 1/2"BL 100' | CP-221 3/4" BL200' | CP-221 1/2" BL200' | CP-221 1/4" BL200' | CP-221 3/16" BL250' | CP-221 3/32" BL500' | CP-221 1/16" BL1000'


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CP-221 3/64" BL1000' Datasheet file may be downloaded here without warranties.

Datasheet ID: CP-221 3/64" BL1000' 519802