CP-221 Tubing
Part | Datasheet |
---|---|
![]() |
CP-221 1" BL100' (pdf) |
Related Parts | Information |
---|---|
![]() |
CP-221 2" BL100' |
![]() |
CP-221 1 1/2"BL 100' |
![]() |
CP-221 3/4" BL200' |
![]() |
CP-221 1/2" BL200' |
![]() |
CP-221 1/4" BL200' |
![]() |
CP-221 3/16" BL250' |
![]() |
CP-221 3/32" BL500' |
![]() |
CP-221 1/16" BL1000' |
![]() |
CP-221 3/64" BL1000' |
![]() |
CP-221 1/8" BL500' |
![]() |
CP-221 3/8" BL200' |
![]() |
Q47600 |
PDF Datasheet Preview |
---|
CP-221 Tubing General Purpose Polyolefin Data Sheet Product Description 3M CP-221 Tubing, rated at 125°C 257°F , is mechanically tough and provides an economical combination of electrical insulation, flame retardance and chemical properties. In comparison with vinyl tubings, CP-221 Tubing offers higher continuous operating temperature, reduced longitudinal shrinkage, extended shelf-life and superior conformity characteristics. CP-221 Tubing is rated for continuous operation from to 135°C 257°F and withstands higher temperatures for short periods. It is available in standard sizes from 3/64inch to 2-inch expanded diameter and is readily markable. Minimum shrink temperature for CP-221 Tubing is 121°C 250°F . CP-221 Tubing is recommended as a general purpose heat-shrinkable tubing for new commercial applications as well as for upgrading existing applications where other types of tubings are now used. Shrink Ratio CP-221 Tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness of the tubing is proportional to the degree of recovery. High expansion-ratio CP-221 Tubing is available subject to factory quotation. Standard Color Black. Other colors available subject to factory quotation. Standard Packaging Spools. Cut pieces available subject to factory quotation. Ordering Information Order CP-221 Tubing in the size equivalent to the expanded inside diameter required. Always order the largest size that will shrink-fit snugly over the item to be covered. Example CP-221, 3/16", black, spools. Standard Sizes and Dimensions Ordering Size 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1/2 Expanded I.D. Minimum 1,19 1,60 2,38 3,18 4,76 6,35 9,53 12,70 19,05 25,40 38,10 50,80 Recovered I.D. Maximum 0,58 0,79 1,19 1,57 2,38 3,18 4,76 6,35 9,53 12,20 19,05 25,41 Recovered Wall Thickness Nominal in. mm 0,41 0,43 0,51 0,51 0,51 0,64 0,64 0,64 0,76 0,89 1,02 1,14 Typical Properties Physical Tensile Strength 1800 PSI Ultimate Elongation 400% Longitudinal Change ±5% Secant Modulus 30,000 PSI Specific Gravity Heat Aging Elongation 168 hrs. 175°C 150% Heat Shock No dripping, 4 hrs. 225°C or cracking Low Temperature Flexibility 4 hrs. No cracking Electrical Dielectric Strength 550 V/mil Volume Resistivity 1014 ohm-cm Chemical Corrosion Resistance Copper mirror Solvent Resistance Tensile Strength Dielectric Strength Water Absorption Noncorrosive 1000 PSI 400 V/mil Technical information provided consists of typical product data and should not be used for specification purposes. Unless otherwise noted, all tests are performed at room temperature. Limited Warranty 3M expressly warrants that for a period of ninety days from the date of purchase, 3M static control products will be free of defects in materials parts and workmanship labor . Defects occurring during the warranty period will be repaired or products will be replaced at 3M’s option and expense, if 3M receives notice during the warranty period. Defective products must be returned to 3M with proof of purchase date. |
More datasheets: 363UYD/S530-A3 | 8383014000010 | 8383034000010 | 8383010000010 | 8383040000010 | 8383016000010 | AD8417R-EVALZ | AD8417RM-EVALZ | 3121 | 1-NPO/603-1332 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CP-221 1" BL100' Datasheet file may be downloaded here without warranties.