500-032-050

500-032-050 Datasheet

500 Series

Part	Datasheet
500-032-050	500-032-050 (pdf)

PDF Datasheet Preview
3M SIP Socket Screw Machine, Low Profile 500 Series • Standard 32 pin strip can be cut to length • Reliable four finger contact interface • Lower contact point enables lower total profile • Inner contact aligned to maximize contact surface area • Can be used in pairs to simulate DIP configuration • Side and end stackable for board and design flexibility • RoHS* compliant Date Modified February 20, 2007 TS-2119-03 Sheet 1 of 2 Physical Insulation Material Glass Filled Polyester Flammability UL 94V-0 Color Black Contact Material Sleeve Brass Inner contact Beryllium Copper Plating Underplating 100 [ um ] min. Nickel Wiping Area 8 [ um ] min. Gold Terminal Area Gold flash RoHS compliant Mating Device Leads Rectangular Lead W mm X T mm max. Diagonal Circular Lead mm Length mm min. Marking None Electrical Current Resistance < 25mΩ Current Rating 1 A Insulation Resistance 1,000 MΩ at 500 VDC Withstanding Voltage 1000 VAC rms for 1 minute Environmental Temperature Rating -65°C to +125°C Process Rating 260°C max. for 5 seconds, Dipping One time Not for reflow soldering. *"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. 3 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M SIP Socket Screw Machine, Low Profile 500 Series X N - 1 = B PCB HOLE PATTERN COMPONENT SIDE Note Not for reflow soldering. Ordering Information 500-0XX-0X0 Inch [m ] Tolerance Unless Noted inch [ ] Dim ensions for R eference O nly Contact Quantity 32 Lead standard contact customer support for other lead counts Tail plating 5 = Gold flash RoHS compliant TS-2119-03 Sheet 2 of 2 3 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Minimum 10% Post-Consumer Fiber Printed in USA. 3M 2007

PDF Datasheet Preview

3M SIP Socket

Screw Machine, Low Profile
500 Series
• Standard 32 pin strip can be cut to length
• Reliable four finger contact interface
• Lower contact point enables lower total profile
• Inner contact aligned to maximize contact
surface area
• Can be used in pairs to simulate DIP
configuration
• Side and end stackable for board and design
flexibility
• RoHS* compliant

Date Modified February 20, 2007

TS-2119-03 Sheet 1 of 2

Physical

Insulation Material Glass Filled Polyester Flammability UL 94V-0 Color Black

Contact Material Sleeve Brass

Inner contact Beryllium Copper Plating Underplating 100 [ um ] min. Nickel

Wiping Area 8 [ um ] min. Gold Terminal Area Gold flash RoHS compliant Mating Device Leads Rectangular Lead W mm X T mm max. Diagonal Circular Lead mm

Length mm min. Marking None

Electrical

Current Resistance < 25mΩ Current Rating 1 A

Insulation Resistance 1,000 MΩ at 500 VDC Withstanding Voltage 1000 VAC rms for 1 minute

Environmental

Temperature Rating -65°C to +125°C Process Rating 260°C max. for 5 seconds, Dipping One time Not for reflow soldering.
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS a by weight for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M SIP Socket

Screw Machine, Low Profile
500 Series

X N - 1 = B

PCB HOLE PATTERN COMPONENT SIDE

Note Not for reflow soldering.
Ordering Information
500-0XX-0X0

Inch [m ]

Tolerance Unless Noted
inch [ ] Dim ensions for R eference

O nly

Contact Quantity 32 Lead standard contact customer support for other lead counts

Tail plating 5 = Gold flash RoHS compliant

TS-2119-03 Sheet 2 of 2
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
3M Electronics
6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Minimum 10% Post-Consumer Fiber

Printed in USA. 3M 2007

More datasheets: 1113T102 | 1113T101 | 1113T100 | 1113B503 | 1113B502 | M1648 SL001 | M1648 SL002 | M1648 SL005 | ES1AWB | UP1-TO3B

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 500-032-050 Datasheet file may be downloaded here without warranties.

Datasheet ID: 500-032-050 518112