10226-1A10VE

10226-1A10VE Datasheet


102 Series

Part Datasheet
10226-1A10VE 10226-1A10VE 10226-1A10VE (pdf)
Related Parts Information
10240-1210VE 10240-1210VE 10240-1210VE
10214-1210VE 10214-1210VE 10214-1210VE
10220-1210VE 10220-1210VE 10220-1210VE
10226-1210VE 10226-1210VE 10226-1210VE
10250-1210VE 10250-1210VE 10250-1210VE
PDF Datasheet Preview
3M Mini D Ribbon MDR Connectors

Surface Mount Right Angle Receptacle - Shielded
102 Series
• Wiper-on-wiper contact for reliable repetitive plugging
• Ultra-low signal skew for high data rate transmission
• Interface latch design for connection stability
• MDR digital LCD interface as a 20 or 26 contact connector
• Contacts 14, 20, 26, 40 and 50
• RoHS* compliant version -PE plating suffix available

Date Modified April 5, 2005

TS-0755-10 Sheet 1 of 3

Physical Electrical

Insulation Material Glass Reinforced Polyester PCT Flammability UL 94V-0
Color Beige Contact Material Copper Alloy C521 Plating Underplating 80 µm Nickel - QQ-N-290, Class 2 Wiping Area 30 µm Min Gold - MIL-G-45204, Type II, Grade C Solder Tails See ordering information Shroud & Latch Hook Material Steel Plating Nickel Screw Lock Material Copper Alloy C521 Plating Tin Marking 3M Logo & Part Number

Current Rating 1 A Insulation Resistance > 5 x at 500 VDC Withstanding Voltage 500 Vrms for 1 Minute

Environmental

Temperature Rating -55°C to +105°C Process Surface mount compatible - max. temp. 240°-250°C for 10 seconds.

UL File No. E68080 *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
3M Interconnect Solutions
3M is a trademark of 3M Company.
For technical, sales or ordering information call 800-225-5373
3M Mini D Ribbon MDR Connectors

Surface Mount Right Angle Receptacle - Shielded

Contact Quantity
14 20 26 40 50
3M Part Number
10214-1210 VE 10220-1210 VE 10226-1210 VE 10240-1210 VE 10250-1210 VE

A±.008 [ ] [ ] [ ] [ ] [ ]

B±.006 [ ] [ ] [ ] [ ] [ ]

Dimensions C±.006
[ ] [ ] [ ] [ ] [ ]

D±.006 [ ] [ ] [ ] [ ] [ ]

E±.006 [ ] [ ] [ ] [ ] [ ]
102 Series
position above last position last position
2X M2.5 Thread

A D [ ] position 2 nom. [ ]
position below pos. 1
position 1
2X M2.5 Thread see note in ordering info

Position 1
last position
Ordering Information

Inch

Position

Tolerance Unless Noted

Positioning Boss 2x
inch
[ ] Dim ensions for Reference O nly
102XX-1210XE

Contact Quantity See Table

Solder tail plating V = tin-lead over Ni P = flash gold over Ni RoHS compliant

Note Use M2.5x8 mm screws to mount to panel with max. thickness of mm.
3M Interconnect Solutions

TS-0755-10 Sheet 2 of 3
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon MDR Connectors

Surface Mount Right Angle Receptacle - Shielded
102 Series

Contact Quantity

Dimensions B ±

Recommended Board Layout
viewed from connector side
14 [ ] [ ] [ ]
20 [ ] [ ] [ ] 26 [ ] [ ] [ ]
center spacing C

Solder Pads for Solder Tail See below for more detail
40 [ ] [ ] [ ] 50 [ ] [ ] [ ]
center spacing ± [ ]
± ± 2X Screw Lock see notes below
[ ] [ ] PCB Ref. Edge

Solder Tail Layout Detail
max. [ ]

Lockstand Solder Pad Outline
+ 2X -

Positioning Hole
#'s Correspond to Connector Contact # Shown on Previous Page
14 Pos. 7 6 5 4 3 2 1

Last 14 13 12 11 10 9 8 Pos. PCB Ref. Edge

Connector Position Top Row

Position Bottom Row
20 Pos. 10 9 8 7 6 5 4 3 2 1

Last Pos.
20 19 18 17 16 15 14 13 12 11 PCB Ref. Edge

Connector Position Top Row

Position Bottom Row
13 12 11 10 9 8 7 6 5 4 3 2 1
26 Pos.

Last Pos.
26 25 24 23 22 21 20 19 18 17 16 15 14 PCB Ref. Edge

Connector Position Top Row

Position Bottom Row
40 Pos. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Last Pos.
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 PCB Ref. Edge
For technical, sales or ordering information call 800-225-5373

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized of 3M.

Warranty Limited Remedy Limited Liability.

This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronic Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000

Minimum 10% Post-consumer Fiber

Printed in USA. 3M 2005
More datasheets: ESTT06140 | ESTT06240 | ESTT04140 | ESTT04150 | ESTT04250 | ESTT04240 | VRAH-03L1A00 | SRAH-03L1A0R | SRAH-03L1A00 | FDS8926A


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 10226-1A10VE Datasheet file may be downloaded here without warranties.

Datasheet ID: 10226-1A10VE 517045