10150-4CZ3PL

10150-4CZ3PL Datasheet

101 Series

Part	Datasheet
10150-4CZ3PL	10150-4CZ3PL (pdf)

PDF Datasheet Preview
3M Mini D Ribbon MDR Connectors IDC Wiremount Plug - Shielded 101 Series • Wiper-on-wiper contact for reliable repetitive plugging • MDR digital LCD interface as a 20 or 26 contact connector • IEEE 1284C Interface as a 36 contact connector • Accepts a wide variety of cable constructions including flat, round, twisted pair and twinax cables • Accepts a wide variety of shielded junction shells • Contacts 14, 20, 26, 36, 40, 50, 68, 80 and 100 • See Regulatory Information Appendix RIA for chemical compliance information Date Modified February 7, 2007 TS-0423-14 Sheet 1 of 3 Physical Insulation Material Glass Reinforced Polyester Flammability UL 94V-0 Body Color Black Cover Color Black, Gray Contact Material Beryllium Copper Underplating 80 [ um ] Nickel Wiping Area Plating 30 [ um ] Min. Gold IDC Contacts Plating Gold flash Shroud Material Steel Plating Nickel Wire Accommodation Black Cover 28 AWG Stranded, 30 AWG Solid Insulation Diameter = mm Max. Gray Cover 26 AWG Solid Insulation Diameter = mm to mm Marking 3M Logo and Part Number Electrical Current Rating 1 A Insulation Resistance > 1 x 108Ω at 500 VDC Withstanding Voltage 500 VRMS for 1 Minute Environmental Temperature Rating -20°C to +85°C UL File No. E68080 3 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M Mini D Ribbon MDR Connectors IDC Wiremount Plug - Shielded 101 Series Contact Quantity 14 26 50 A [ ] [ ] [ ] Dimensions D [ ] [ ] [ ] Body 14, 26 and 50 positions Cover Assembly 0 Position See Note 1 Last Position Position 1 See Note 2 Position 3 Position 2 Cover 1 101XX Position 1 Body Position 2 Position 3 Cover 2 Position See Notes Last Position 15° Inch 1.Circle 0 position indicates #1 position in cable, when utilizing pitch flat cable. 2.Triangle position indicates #2 position in cable, when utilizing pitch flat cable. Tolerance Unless Noted inch [ ] D im ensions for R eference O nly Ordering Information 101XX-60X0EC See page 3 for other sizes and assembly tools. Contact Quantity See Table Note 100 pos = A0 Wiping Interface Plating C = 30u m [ mm ] Min. Gold over Ni Wire Accommodation 0 = Black Cover 28 AWG Stranded, 30 AWG Solid 1 = Gray Cover 26 AWG Solid Available in 68 Contact Only, UL Pending IDC Plating E = Gold Flash over Ni App E1 & C1 apply TS-0423-14 Sheet 2 of 3 3 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M Mini D Ribbon MDR Connectors IDC Wiremount Plug - Shielded Contact Quantity 20 36 40 68 80 100 A [ ] [ ] [ ] [ ] [ ] [ ] Dimensions D [ ] [ ] [ ] [ ] [ ] [ ] Cover Assembly Body 20, 36, 40, 68, 80 and 100 positions 0 Position See Note 1 Last Position Position 1 See Note 2 Position 3 Position 2 Cover 1 101 Series 101XX Body Cover 2 Position 1 Position 2 Position 3 Position See Notes A B Last Position 15° 1.Circle 0 position indicates #1 position in cable, when utilizing pitch flat cable. 2.Triangle position indicates #2 position in cable, when utilizing pitch flat cable. Inch [m ] Tolerance U nless N oted inch [ ] D im ensions for R eference O nly Ordering Information 101XX-60X0EC Contact Quantity See Table Note 100 pos = A0 Wiping Interface Plating C = 30u m [ mm ] Min. Gold over Ni Wire Accommodation: 3 Assembly tools 3M Hand Press Kit 3829 68 position & below . All Sizes 3M Assembly Press 10962-2000 3M Lacing Fixture 10962-2000, 3M 0 = Black Cover 28 AWG Stranded, 30 AWG Solid 1 = Gray Cover 26 AWG Solid Available in 68 Contact Only, UL Pending Cutting Unit 10961 & 3M Wire Clamp 10964-1 14-50 pos. or 3M Wire Clamp 10964-2 68-100 pos. . IDC Plating E = Gold flash over Ni App E1 & C1 apply TS-0423-14 Sheet 3 of 3 3 Interconnect Solutions 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-B CHINA Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 RIA-2217-B 3M 2007

PDF Datasheet Preview

3M Mini D Ribbon MDR Connectors

IDC Wiremount Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable repetitive plugging
• MDR digital LCD interface as a 20 or 26 contact connector
• IEEE 1284C Interface as a 36 contact connector
• Accepts a wide variety of cable constructions including flat, round, twisted pair and twinax cables
• Accepts a wide variety of shielded junction shells
• Contacts 14, 20, 26, 36, 40, 50, 68, 80 and 100
• See Regulatory Information Appendix RIA for chemical compliance information

Date Modified February 7, 2007

TS-0423-14 Sheet 1 of 3

Physical

Insulation Material Glass Reinforced Polyester Flammability UL 94V-0 Body Color Black Cover Color Black, Gray Contact Material Beryllium Copper Underplating 80 [ um ] Nickel

Wiping Area Plating 30 [ um ] Min. Gold IDC Contacts Plating Gold flash Shroud Material Steel Plating Nickel

Wire Accommodation Black Cover 28 AWG Stranded, 30 AWG Solid Insulation Diameter = mm Max. Gray Cover 26 AWG Solid Insulation Diameter = mm to mm Marking 3M Logo and Part Number

Electrical

Current Rating 1 A Insulation Resistance > 1 x 108Ω at 500 VDC Withstanding Voltage 500 VRMS for 1 Minute

Environmental

Temperature Rating -20°C to +85°C

UL File No. E68080
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon MDR Connectors

IDC Wiremount Plug - Shielded
101 Series

Contact Quantity
14 26 50

A [ ] [ ] [ ]

Dimensions

D [ ] [ ] [ ]

Body 14, 26 and 50 positions

Cover Assembly
0 Position See Note 1

Last Position

Position 1 See Note 2

Position 3 Position 2

Cover 1
101XX

Position 1

Body

Position 2 Position 3

Cover 2

Position See Notes

Last Position 15°

Inch
1.Circle 0 position indicates #1 position in cable, when utilizing pitch flat cable. 2.Triangle position indicates #2 position in cable, when utilizing pitch flat cable.

Tolerance Unless Noted
inch
[ ] D im ensions for R eference O nly
Ordering Information
101XX-60X0EC

See page 3 for other sizes and assembly tools.

Contact Quantity See Table

Note 100 pos = A0

Wiping Interface Plating C = 30u m [ mm ] Min. Gold over Ni

Wire Accommodation 0 = Black Cover 28 AWG Stranded, 30 AWG Solid 1 = Gray Cover 26 AWG Solid Available in 68 Contact Only, UL Pending

IDC Plating E = Gold Flash over Ni App E1 & C1 apply

TS-0423-14 Sheet 2 of 3
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373
3M Mini D Ribbon MDR Connectors

IDC Wiremount Plug - Shielded

Contact Quantity
20 36 40 68 80 100

A [ ] [ ] [ ] [ ] [ ] [ ]

Dimensions

D [ ] [ ] [ ] [ ] [ ] [ ]

Cover Assembly

Body 20, 36, 40, 68, 80 and 100 positions
0 Position See Note 1

Last Position

Position 1 See Note 2

Position 3 Position 2

Cover 1
101 Series
101XX

Body

Cover 2

Position 1

Position 2 Position 3

Position

See Notes A B

Last Position
15°
1.Circle 0 position indicates #1 position in cable, when utilizing pitch flat cable. 2.Triangle position indicates #2 position in cable, when utilizing pitch flat cable.

Inch [m ]

Tolerance U nless N oted
inch [ ] D im ensions for R eference

O nly
Ordering Information
101XX-60X0EC

Contact Quantity See Table

Note 100 pos = A0

Wiping Interface Plating C = 30u m [ mm ] Min. Gold over Ni

Wire Accommodation:
3 Assembly tools 3M Hand Press Kit 3829 68
position & below . All Sizes 3M Assembly Press
10962-2000 3M Lacing Fixture 10962-2000, 3M
0 = Black Cover 28 AWG Stranded, 30 AWG Solid 1 = Gray Cover 26 AWG Solid Available in 68 Contact Only, UL Pending

Cutting Unit 10961 & 3M Wire Clamp 10964-1 14-50
pos. or 3M Wire Clamp 10964-2 68-100 pos. .

IDC Plating E = Gold flash over Ni App E1 & C1 apply

TS-0423-14 Sheet 3 of 3
3 Interconnect Solutions
3M is a trademark of 3M Company. For technical, sales or ordering information call
800-225-5373

Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4 European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part “Product” does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-B

CHINA

Appendix C1 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2 China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material a by weight for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or b by weight for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below.

Name and Content of Hazardous Substances or Elements

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Electronic Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373

RIA-2217-B 3M 2007

More datasheets: 76002021 | ECM-9 | ECM-8 | ECM-2 | ECM-7 | ECM-6 | ECM-3 | W4E300-CP30-70 | W4E300-CP26-70 | CY7C1338B-100AC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 10150-4CZ3PL Datasheet file may be downloaded here without warranties.

Datasheet ID: 10150-4CZ3PL 516957