ZLP12800100ZACG
ZLP12800100ZACG Datasheet
ZLP12800100ZACG Crimzon Development Board Accessory Kit
| Part | Datasheet |
|---|---|
ZLP12800100ZACG |
ZLP12800100ZACG (pdf) |
| PDF Datasheet Preview |
|---|
| ZLP12800100ZACG Crimzon Development Board Accessory Kit PUG002401-0806 Product User Guide Introduction Thank you for purchasing the ZiLOG ZLP12800100ZACG CrimzonTM Development Board Accessory Kit Figure The CrimzonTM Development Board Accessory Kit is designed for use as a target with the Crimzon In-Circuit Emulator ZLP128ICE01ZEMG . The kit is powered by two 1.5V AAA batteries. The board can also be powered using an adjustable DC power supply connected between terminals J7 VBAT and J6 GND . This startup guide tells you how to install the batteries supplied with the accessory kit and how to verify proper development board operation. Kit Contents • One 1 Crimzon development board with no silicon installed • Two 2 1.5V AAA batteries Applying Power to the Kit To apply power to the development kit Install the two 2 AAA batteries in the battery holder on the bottom of the development board. When installing the batteries, ensure that the batteries are fully seated in the battery holder by rotating each battery after snapping it into place. Set the On-Off switch Figure 1 to the ON position. Refer to the Crimzon In-Circuit Emulator User Manual, UM0184, for details using the development board accessory kit to develop IR applications. ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126 Telephone • Fax • CrimzonTM RC Development Platform Product User Guide Page 2 Figure The ZiLOG CrimzonTM Development Board Accessory Kit PUG002401-0806 CrimzonTM RC Development Platform Product User Guide This publication is subject to replacement by a later edition. To determine whether a later edition exists, or to request copies of publications, contact: ZiLOG Worldwide Headquarters 532 Race Street San Jose, CA 95126 Telephone Fax: Document Disclaimer ZiLOG is a registered trademark of ZiLOG Inc. in the United States and in other countries. All other products and/or service names mentioned herein may be trademarks of the companies with which they are associated. 2006 by ZiLOG, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZiLOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZiLOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. Devices sold by ZiLOG, Inc. are covered by warranty and limitation of liability provisions appearing in the ZiLOG, Inc. Terms and Conditions of Sale. ZiLOG, Inc. makes no warranty of merchantability or fitness for any purpose Except with the express written approval of ZiLOG, use of information, devices, or technology as critical components of life support systems is not authorized. No licenses are conveyed, implicitly or otherwise, by this document under any intellectual property rights. PUG002401-0806 ROW0 ROW1 ROW2 ROW3 ROW4 ROW5 ROW6 ROW7 GND P36 2 4 6 8 10 12 14 16 18 20 22 24 26 Vbat Vbat COL0 COL1 COL2 COL3 COL4 COL5 COL6 COL7 HEADER 13X2 Vbat IR_EN R1 1K BC807 0.1uF HEADER 3X2 ZLP12840 default OUT ZLP32300 3-4 5-6 IN OUT IN BC807 R8 1K PHOTODIODE R10 1K |
| More datasheets: 32-1/G4C-AQSB | 690-024-360-900 | 690-024-260-900 | FQB5N60TM | 3078 | 50739171474600F | AMGP-6552-TR2G | AMGP-6552-BLKG | AMGP-6552-TR1G | 1012 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ZLP12800100ZACG Datasheet file may be downloaded here without warranties.