IRKU71/04A

IRKU71/04A Datasheet

IRKU/V71, 91 SERIES

Part	Datasheet
IRKU71/04A	IRKU71/04A (pdf)

Related Parts	Information
IRKU71/12A	IRKU71/12A
IRKU71/16A	IRKU71/16A
IRKU91/04A	IRKU91/04A
IRKU91/08A	IRKU91/08A
IRKU91/12A	IRKU91/12A
IRKU91/16A	IRKU91/16A
IRKU71/08A	IRKU71/08A

PDF Datasheet Preview
THYRISTOR/ THYRISTOR High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage IRKU/V71, 91 SERIES ADD-A-pakTM GEN V Power Modules Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 75 A 95 A Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. The electrical terminals are secured against axial pull-out they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Electrical Description These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. Major Ratings and Characteristics Parameters IRKU/V71 IRKU/V91 Units 85°C IT RMS ITSM 50Hz 60Hz I2t 50Hz 60Hz 75 115 1665 1740 95 150 1785 1870 A KA2s VRRM range 400 to 1600 TSTG - 40 to 125 - 40 to125 IRKU/V71, 91 Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code VRRM , maximum repetitive VRSM , maximum VDRM , max. repetitive non-repetitive peak off-state voltage, IRKU/V71, 91 1200 1300 1200 1600 1700 1600 IRRM IDRM 125°C mA On-state Conduction Parameters IT AV Max. average on-state current IT RMS Max. RMS on-state Ordering Information Table Device Code IRK U 91 / 16 A S90 IRK.92 types With no auxiliary cathode 1 - Module type 2 - Circuit configuration See Circuit Configuration table 3 - Current code * * 4 - Voltage code See Voltage Ratings table 5 - A Gen V 6 - dv/dt code S90 = dv/dt 1000 V/µs No letter = dv/dt 500 Vµs Outline Table * * Available with no auxiliary cathode. To specify change 91 to 92 71 to 72 e.g. IRKU92/16A etc. IRKU Dimensions are in millimeters and [inches] IRKV G1 K1 K2 G2 4 5 7 6 G1 K1 K2 G2 4 5 7 6 NOTE To order the Optional Hardware see Bulletin I27900 4 Maximum Allowable Case Temperature °C 130 IRK.71.. Series R thJC DC = K/W 120 Conduction Angle 100 30° 60° 90° 120° 180° 70 0 10 20 30 40 50 60 70 80 Average On-state Current A Fig. 1 - Current Ratings Characteristics 180° 120° 90° 60° 30° RMS Limit 60 Maximum Average On-state Power Loss W Peak Half Sine Wave On-state Current A Conduction Angle IRK.71.. Series Per Junction T J = 125°C 0 10 20 30 40 50 60 70 80 Average On-state Current A Fig. 3 - On-state Power Loss Characteristics 1600 1500 1400 1300 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial T J= 125°C 60 Hz s 50 Hz s

PDF Datasheet Preview

THYRISTOR/ THYRISTOR

High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage

IRKU/V71, 91 SERIES

ADD-A-pakTM GEN V Power Modules

Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded
75 A 95 A

Mechanical Description

The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads.

The electrical terminals are secured against axial pull-out they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules.

Electrical Description

These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger.

Major Ratings and Characteristics

Parameters IRKU/V71 IRKU/V91 Units
85°C IT RMS ITSM 50Hz
60Hz I2t 50Hz
60Hz
75 115 1665 1740
95 150 1785 1870

A KA2s

VRRM range
400 to 1600

TSTG
- 40 to 125
- 40 to125

IRKU/V71, 91 Series

ELECTRICAL SPECIFICATIONS Voltage Ratings

Type number

Voltage Code

VRRM , maximum repetitive

VRSM , maximum VDRM , max. repetitive non-repetitive peak off-state voltage,

IRKU/V71, 91
1200
1300
1200
1600
1700
1600

IRRM IDRM 125°C mA

On-state Conduction

Parameters IT AV Max. average on-state
current IT RMS Max. RMS on-state
Ordering Information Table

Device Code

IRK U 91 / 16 A S90

IRK.92 types With no auxiliary cathode
1 - Module type 2 - Circuit configuration See Circuit Configuration table 3 - Current code * * 4 - Voltage code See Voltage Ratings table 5 - A Gen V 6 - dv/dt code S90 = dv/dt 1000 V/µs

No letter = dv/dt 500 Vµs

Outline Table
* * Available with no auxiliary cathode. To specify change 91 to 92 71 to 72 e.g. IRKU92/16A etc.

IRKU

Dimensions are in millimeters and [inches]

IRKV

G1 K1 K2 G2 4 5 7 6

G1 K1 K2 G2 4 5 7 6

NOTE To order the Optional Hardware see Bulletin I27900 4

Maximum Allowable Case Temperature °C
130 IRK.71.. Series

R thJC DC = K/W 120

Conduction Angle 100
30°
60° 90° 120°
180°
70 0 10 20 30 40 50 60 70 80

Average On-state Current A

Fig. 1 - Current Ratings Characteristics
180°
120°
90°
60°
30°

RMS Limit 60

Maximum Average On-state Power Loss W

Peak Half Sine Wave On-state Current A

Conduction Angle

IRK.71.. Series Per Junction

T J = 125°C
0 10 20 30 40 50 60 70 80

Average On-state Current A

Fig. 3 - On-state Power Loss Characteristics
1600 1500 1400 1300

At Any Rated Load Condition And With

Rated VRRM Applied Following Surge. Initial T J= 125°C 60 Hz s 50 Hz s

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRKU71/04A Datasheet file may be downloaded here without warranties.

Datasheet ID: IRKU71/04A 639087