IRKH26/14A

IRKH26/14A Datasheet

IRK.26 SERIES

Part	Datasheet
IRKH26/14A	IRKH26/14A (pdf)

Related Parts	Information
IRKT26/04A	IRKT26/04A
IRKL26/14A	IRKL26/14A
IRKT26/06A	IRKT26/06A
IRKH27/16A	IRKH27/16A
IRKT26/08A	IRKT26/08A
IRKH27/12A	IRKH27/12A
IRKL26/12A	IRKL26/12A
IRKL27/12A	IRKL27/12A
IRKT26/10A	IRKT26/10A
IRKT27/04A	IRKT27/04A
IRKT27/06A	IRKT27/06A
IRKT27/08A	IRKT27/08A
IRKT27/10A	IRKT27/10A
IRKT27/12A	IRKT27/12A
IRKT26/12A	IRKT26/12A
IRKT26/14A	IRKT26/14A
IRKT26/16A	IRKT26/16A
IRKL26/16A	IRKL26/16A
IRKT27/16A	IRKT27/16A
IRKH26/16A	IRKH26/16A
IRKL26/10A	IRKL26/10A
IRKL26/08A	IRKL26/08A
IRKL26/06A	IRKL26/06A
IRKH26/12A	IRKH26/12A
IRKH26/10A	IRKH26/10A
IRKH26/08A	IRKH26/08A
IRKH26/06A	IRKH26/06A
IRKH26/04A	IRKH26/04A
IRKL26/04A	IRKL26/04A

PDF Datasheet Preview
THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage IRK.26 SERIES ADD-A-pakTM GEN V Power Modules Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. Major Ratings and Characteristics Parameters IT AV or IF AV 85°C IRK.26 27 Units A IO RMS * ITSM 50Hz IFSM 60Hz I2t 50Hz 60Hz 60 400 420 800 730 8000 A A2s VRRM range 400 to 1600 TSTG - 40 to 125 - 40 to125 * As AC switch. The electrical terminals are secured against axial pull-out they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Electrical Description These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. IRK.26 Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code 04 06 08 VRRM , maximum repetitive 600 800 VRSM , maximum VDRM , max. repetitive non-repetitive peak off-state voltage, IRK.26 1000 1200 1400 1100 1300 1500 1000 1200 1400 1600 1700 Ordering Information Table Device Code IRK T 26 / 16 A S90 IRK.27 types With no auxiliary cathode 1 - Module type 2 - Circuit configuration See Circuit Configuration table below 3 - Current code * * 4 - Voltage code See Voltage Ratings table 5 - A Gen V 6 - dv/dt code S90 = dv/dt 1000 V/µs No letter = dv/dt 500 Vµs Outline Table * * Available with no auxiliary cathode. To specify change 26 to 27 e.g. IRKT27/16A etc. IRKT Dimensions are in millimeters and [inches] IRKH IRKL IRKN G1 K1 4 5 K2 G2 7 6 G1 K1 4 5 K2 G2 7 6 NOTE To order the Optional Hardware see Bulletin I27900 4 + 3 G1 K1 4 5 Maximum Allowable Case Temperature °C 130 IRK.26.. Series R thJC DC = K/W 110 Conduction Angle 30° 60° 90° 120° 180° Maximum Average On-state Power Loss W 5 10 15 20 25 30 Average On-state Current A Fig. 1 - Current Ratings Characteristics 50 180° 120° 90° 60° 30° 30 RMS Limit Conduction Angle IRK.26.. Series Per Junction T J = 125°C 5 10 15 20 25 30 Average On-state Current A Fig. 3 - On-state Power Loss Characteristics At Any Rated Load Condition And With Rated VRRM Applied Following Surge.

PDF Datasheet Preview

THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR

High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage

IRK.26 SERIES

ADD-A-pakTM GEN V Power Modules

Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded

Mechanical Description

The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads.

Major Ratings and Characteristics

Parameters IT AV or IF AV
85°C

IRK.26 27

Units A

IO RMS * ITSM 50Hz IFSM 60Hz I2t 50Hz
60Hz
60 400 420 800 730 8000

A A2s

VRRM range
400 to 1600

TSTG
- 40 to 125
- 40 to125
* As AC switch.

The electrical terminals are secured against axial pull-out they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules.

Electrical Description

These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger.

IRK.26 Series

ELECTRICAL SPECIFICATIONS Voltage Ratings

Type number

Voltage Code
04 06 08

VRRM , maximum repetitive
600 800

VRSM , maximum VDRM , max. repetitive non-repetitive peak off-state voltage,

IRK.26
1000
1200
1400
1100 1300 1500
1000 1200 1400
1600
1700
Ordering Information Table

Device Code

IRK T 26 / 16 A S90

IRK.27 types With no auxiliary cathode
1 - Module type 2 - Circuit configuration See Circuit Configuration table below 3 - Current code * * 4 - Voltage code See Voltage Ratings table 5 - A Gen V 6 - dv/dt code S90 = dv/dt 1000 V/µs

No letter = dv/dt 500 Vµs

Outline Table
* * Available with no auxiliary cathode. To specify change 26 to 27
e.g. IRKT27/16A etc.

IRKT

Dimensions are in millimeters and [inches]

IRKH

IRKL

IRKN

G1 K1 4 5

K2 G2 7 6

G1 K1 4 5

K2 G2 7 6

NOTE To order the Optional Hardware see Bulletin I27900 4
+ 3 G1 K1 4 5

Maximum Allowable Case Temperature °C
130 IRK.26.. Series R thJC DC = K/W
110 Conduction Angle
30° 60°
90° 120° 180°

Maximum Average On-state Power Loss W
5 10 15 20 25 30

Average On-state Current A Fig. 1 - Current Ratings Characteristics
50 180°
120°
90° 60°
30°
30 RMS Limit

Conduction Angle

IRK.26.. Series

Per Junction

T J = 125°C
5 10 15 20 25 30

Average On-state Current A Fig. 3 - On-state Power Loss Characteristics

At Any Rated Load Condition And With

Rated VRRM Applied Following Surge.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRKH26/14A Datasheet file may be downloaded here without warranties.

Datasheet ID: IRKH26/14A 639084