UT54ACS245S Transceiver Datasheet

UT54ACS245S Radiation-Hardened Schmitt Octal Bus Transceiver with Three-State Outputs

FEATURES
Three-state outputs drive bus line directly radiation-hardened CMOS
- Latchup immune High speed Low power consumption Single 5 volt supply Available QML Q or V processes Flexible package - 20-pin DIP - 20-lead flatpack

The UT54ACS245S is a non-inverting octal bus transceiver with Schmitt Trigger input levels. The circuit is designed for asynchronous two-way communication between data buses. The control function implementation minimizes external timing requirements.

The device allows data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic level at the direction control (DIR) input. The enable input (G) disables the device so that the buses are effectively isolated.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived UT54ACS245S Transceiver Datasheet file may be downloaded here without warranties.