832-0100

832-0100 Datasheet

Model 832 Accelerometer

Part	Datasheet
832-0100	832-0100 (pdf)

Related Parts	Information
832-0050	832-0050
832-0500	832-0500
832-0200	832-0200

PDF Datasheet Preview
Model 832 Accelerometer Triaxial Piezoelectric Accelerometer <4µA Current Consumption Full Signal and Power Conditioning Circuit Board Mountable The Model 832 is a low cost, board mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 4 micro-amps. The model 832 is available in ±25g to ±500g ranges and provides a flat frequency response up to 2kHz. The model 832M1 provides an extended frequency range to 6kHz. • ±25g to ±500g Dynamic Range • Low Cost Triaxial • Hermetically Sealed • Piezo-ceramic Crystals • -20° to +80°C Operating Range • -40° to +125°C Available on 832M1 • Single Axis Configurations Available • Asset Monitoring • Data Loggers • Impact Monitoring • Machine Health Monitoring • System Wake-Up Switch • Embedded Applications dimensions 949-716-5377 08/05/2013 Model 832 Accelerometer performance specifications All values are typical at +24°C, 100Hz and 3.3Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1001 for Embedded AC Accelerometers. Parameters DYNAMIC Range g Sensitivity mV/g Frequency Response Hz 1 Natural Frequency Hz Non-Linearity %FSO Transverse Sensitivity % Shock Limit g ELECTRICAL Bias Voltage Vdc Total Supply Current µA Excitation Voltage Vdc 3 Output Impedance Ω Insulation Resistance MΩ Broadband Noise µV Spectral Noise Spectral Noise Spectral Noise Warm-Up Time msec Shielding Ground Isolation ENVIRONMENTAL Temperature Response % Operating Temperature °C Storage Temperature °C PHYSICAL Sensing Element Case Material Weight grams ±25 2-2000 >10000 ±2 <10 5000 ±50 2-2000 >10000 ±2 <10 5000 ±100 2-2000 >10000 ±2 <10 5000 ±200 2-2000 >10000 ±2 <10 5000 ±500 2-2000 >10000 ±2 <10 5000 Notes ±30% ±2dB Exc Voltage / 2 Exc Voltage / 2 <100 <100 >100 >100 100% Isolated from Mounting Surface Exc Voltage / 2 <4 to <100 >100 160 120 80 40 Exc Voltage / 2 <4 to <100 >100 150 120 80 40 Exc Voltage / 2 <4 to <100 >100 160 400 320 160 2Hz-10kHz 10Hz 100Hz 1000Hz -10/+20 from -20°C to +80°C -20 to +80 -20 to +80 Ceramic shear mode Ceramic Base, Nickel Silver Cover 1 A wider frequency response of 2-6000Hz is available on model 832M1 2 The model 832 is not to be reflow soldered at high temperature, manual soldering is recommended. See application note. 3 The model 832 can be operated with 2.8V excitation but the full-scale range will be limited. Calibration supplied: ordering info PART NUMBERING Model Number+Range 832-GGGG l Range 0200 is 200g Example 832-0200 Model 832, 200g 949-716-5377 08/05/2013

PDF Datasheet Preview

Model 832 Accelerometer

Triaxial Piezoelectric Accelerometer <4µA Current Consumption Full Signal and Power Conditioning Circuit Board Mountable

The Model 832 is a low cost, board
mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 4 micro-amps. The model 832 is available in ±25g to ±500g ranges and provides a flat frequency response up to 2kHz. The model 832M1 provides an extended frequency range to 6kHz.
• ±25g to ±500g Dynamic Range
• Low Cost Triaxial
• Hermetically Sealed
• Piezo-ceramic Crystals
• -20° to +80°C Operating Range
• -40° to +125°C Available on 832M1
• Single Axis Configurations Available
• Asset Monitoring
• Data Loggers
• Impact Monitoring
• Machine Health Monitoring
• System Wake-Up Switch
• Embedded Applications
dimensions
949-716-5377
08/05/2013

Model 832 Accelerometer
performance specifications

All values are typical at +24°C, 100Hz and 3.3Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1001 for Embedded AC Accelerometers.

Parameters DYNAMIC Range g Sensitivity mV/g Frequency Response Hz 1 Natural Frequency Hz Non-Linearity %FSO Transverse Sensitivity % Shock Limit g

ELECTRICAL Bias Voltage Vdc Total Supply Current µA Excitation Voltage Vdc 3 Output Impedance Ω Insulation Resistance MΩ Broadband Noise µV Spectral Noise Spectral Noise Spectral Noise Warm-Up Time msec Shielding Ground Isolation

ENVIRONMENTAL Temperature Response % Operating Temperature °C Storage Temperature °C

PHYSICAL Sensing Element Case Material Weight grams
±25 2-2000 >10000 ±2 <10 5000
±50 2-2000 >10000 ±2 <10 5000
±100 2-2000 >10000 ±2 <10 5000
±200 2-2000 >10000 ±2 <10 5000
±500 2-2000 >10000 ±2 <10 5000

Notes
±30% ±2dB

Exc Voltage / 2 Exc Voltage / 2
<100
<100
>100
>100
100%

Isolated from Mounting Surface

Exc Voltage / 2 <4 to
<100 >100 160 120 80 40

Exc Voltage / 2 <4 to
<100 >100 150 120 80 40

Exc Voltage / 2 <4 to
<100 >100 160 400 320 160
2Hz-10kHz 10Hz 100Hz 1000Hz
-10/+20 from -20°C to +80°C -20 to +80 -20 to +80

Ceramic shear mode Ceramic Base, Nickel Silver Cover
1 A wider frequency response of 2-6000Hz is available on model 832M1 2 The model 832 is not to be reflow soldered at high temperature, manual soldering is recommended. See application note. 3 The model 832 can be operated with 2.8V excitation but the full-scale range will be limited.

Calibration supplied:
ordering info

PART NUMBERING Model Number+Range
832-GGGG l Range 0200 is 200g

Example 832-0200 Model 832, 200g
949-716-5377
08/05/2013

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 832-0100 Datasheet file may be downloaded here without warranties.

Datasheet ID: 832-0100 647564