SEN-10904

SEN-10904 Datasheet

HDJD-S822-QR999 RGB Color Sensor

Part	Datasheet
SEN-10904	SEN-10904 (pdf)

Related Parts	Information
HDJD-S822-QR999	HDJD-S822-QR999

PDF Datasheet Preview
HDJD-S822-QR999 RGB Color Sensor Data Sheet HDJD-S822-QR999 is a high performance, small in size, cost effective light to voltage converting sensor. The sensor combines a photodiode array and three transimpedance amplifiers in a single monolithic CMOS IC solution. With a Red R , Green G and Blue B color filters coated over the photodiode array, the sensor converts RGB light to analog voltage outputs, denoted by VROUT, VGOUT and VBOUT, respectively. The sensor is packaged in a 5x5x0.75 [mm] surface mount QFN-16 package. • Ideal choice of for open loop and closed loop color identification • Potential applications are such as general color detection, industrial process, environmental lighting, cabin lighting, decorative lighting and etc. • Convert light to R,G,B voltage output • Monolithic CMOS IC solution comprises of an array of photodiode coated with R,G, B color filter and integrated with trans-impedance amplifier • Independent gain selection options for each R,G,B channel • Uniform photodiode array design to minimize the effect of contamination and optical aperture misalignment • Robust package and small in size 5x mm Package Dimensions Note Dimensions are in millimeters mm Part Numbering Systems HDJD-S 8 X - X Gain Selection GS Option 999 GS 00, 01, 10 or 11 Packing Type R Tape and Reel Product Packaging Q QFN Product ID 2 Component without IR filter Pin Out for HDJD-S822-QR999 Pin Name Normal Operation Pin 1 VDD5 5 V DC Supply Pin 2 Ground Pin 3 GSGRN0 Gain Selection Green bit 0 Pin 4 VDD3 3.3V DC output test pin. To be connected to a decoupling capacitor of 100nF to ground is recommended Pin 5 TEST_EN Tie to VDD3 via a pull up resistor Pin 6 GSRED1 Gain Selection Red bit 1 Pin 7 No connection Pin 8

PDF Datasheet Preview

HDJD-S822-QR999 RGB Color Sensor

Data Sheet

HDJD-S822-QR999 is a high performance, small in size, cost effective light to voltage converting sensor. The sensor combines a photodiode array and three transimpedance amplifiers in a single monolithic CMOS IC solution. With a Red R , Green G and Blue B color filters coated over the photodiode array, the sensor converts RGB light to analog voltage outputs, denoted by VROUT, VGOUT and VBOUT, respectively. The sensor is packaged in a 5x5x0.75 [mm] surface mount QFN-16 package.
• Ideal choice of for open loop and closed loop color identification
• Potential applications are such as general color detection, industrial process, environmental lighting, cabin lighting, decorative lighting and etc.
• Convert light to R,G,B voltage output
• Monolithic CMOS IC solution comprises of an array of photodiode coated with R,G, B color filter and integrated with trans-impedance amplifier
• Independent gain selection options for each R,G,B channel
• Uniform photodiode array design to minimize the effect of contamination and optical aperture misalignment
• Robust package and small in size 5x mm

Package Dimensions

Note Dimensions are in millimeters mm

Part Numbering Systems

HDJD-S 8 X - X

Gain Selection GS Option 999 GS 00, 01, 10 or 11

Packing Type R Tape and Reel

Product Packaging Q QFN

Product ID 2 Component without IR filter

Pin Out for HDJD-S822-QR999

Pin Name

Normal Operation

Pin 1

VDD5
5 V DC Supply

Pin 2

Ground

Pin 3

GSGRN0

Gain Selection Green bit 0

Pin 4

VDD3
3.3V DC output test pin. To be connected to a decoupling capacitor of 100nF to ground is recommended

Pin 5

TEST_EN

Tie to VDD3 via a pull up resistor

Pin 6

GSRED1

Gain Selection Red bit 1

Pin 7

No connection

Pin 8

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SEN-10904 Datasheet file may be downloaded here without warranties.

Datasheet ID: SEN-10904 520264