MINT1400A2810L01

MINT1400A2810L01 Datasheet

MINT1400A

Part	Datasheet
MINT1400A2810L01	MINT1400A2810L01 (pdf)

PDF Datasheet Preview
MINT1400A 400W Single Output Series Medical Universal Input Power Supply •Compact x 7” x 1U compatible •Up to 250W Convection Rating •Efficiency up to 91% •12Vdc to 48Vdc outputs, up to 400W •Remote ON/OFF •Safety approved to Medical and ITE Standards • EN/IEC/UL60601-1 and CSA •CSA/EN/IEC/UL60950-1, 2nd Edition •Compliant to EN55011/22 Conducted Noise, Class B •RoHS Compliant Category 6 2 Year Warranty Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 85-270VAC, 47-63 Hz single phase Turn On Time 500mSec maximum Input Current 120VAC 4.2A, 230VAC 2.1A Hold-up Time 20 ms at 400W Inrush Current Active circuit, 37A max Overvoltage Protection See chart Input Fuses F1, F2 6.3A Overload Protection Cycling type, 470W typical Power Factor Efficiency typical, minimum Overtemperature Protection Provided on all models, auto- Typical 88% 120VAC, 91% 240VAC recovery. See page 2 for cooling information Remote Sense Output Power Ripple and Noise Compensates for up to 500mV drop on output leads 400W with fan cooling. See derating chart for other conditions. Peak 450W for 1 min., 10% duty cycle 1% pk-pk max., 20MHz BW, differential mode Output Voltages See chart. Voltages adjustable +/- 5% Total Regulation See chart Minimum Load Transient Response Not required 500µs to 1%, 0.2A/µs, Deviation Switching Frequency Output 170kHz ± 8kHz PFC 90kHz, ± 8kHz Bias 100kHz, ± 6 kHz

PDF Datasheet Preview

MINT1400A
400W Single Output Series Medical Universal Input Power Supply
•Compact x 7” x 1U compatible
•Up to 250W Convection Rating
•Efficiency up to 91%
•12Vdc to 48Vdc outputs, up to 400W
•Remote ON/OFF
•Safety approved to Medical and ITE Standards
• EN/IEC/UL60601-1 and CSA
•CSA/EN/IEC/UL60950-1, 2nd Edition
•Compliant to EN55011/22 Conducted Noise, Class B
•RoHS Compliant Category 6
2 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input
85-270VAC, 47-63 Hz single phase Turn On Time
500mSec maximum

Input Current
120VAC 4.2A, 230VAC 2.1A Hold-up Time
20 ms at 400W

Inrush Current

Active circuit, 37A max Overvoltage Protection

See chart

Input Fuses

F1, F2 6.3A Overload Protection

Cycling type, 470W typical

Power Factor Efficiency
typical, minimum Overtemperature Protection

Provided on all models, auto-

Typical 88% 120VAC, 91% 240VAC
recovery. See page 2 for cooling information

Remote Sense Output Power Ripple and Noise

Compensates for up to 500mV drop on output leads
400W with fan cooling. See derating chart for other conditions. Peak 450W for 1 min., 10% duty cycle
1% pk-pk max., 20MHz BW, differential mode

Output Voltages

See chart. Voltages adjustable +/- 5%

Total Regulation

See chart

Minimum Load Transient Response

Not required 500µs to 1%, 0.2A/µs, Deviation

Switching Frequency

Output 170kHz ± 8kHz PFC 90kHz, ± 8kHz Bias 100kHz, ± 6 kHz

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MINT1400A2810L01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MINT1400A2810L01 506453