MINT1065C1875C01

MINT1065C1875C01 Datasheet


MINT1065

Part Datasheet
MINT1065C1875C01 MINT1065C1875C01 MINT1065C1875C01 (pdf)
Related Parts Information
MINT1065B1875C01 MINT1065B1875C01 MINT1065B1875C01
MINT1065B1575C01 MINT1065B1575C01 MINT1065B1575C01
MINT1065B4875C01 MINT1065B4875C01 MINT1065B4875C01
MINT1065C1275C01 MINT1065C1275C01 MINT1065C1275C01
MINT1065C1575C01 MINT1065C1575C01 MINT1065C1575C01
MINT1065C2475C01 MINT1065C2475C01 MINT1065C2475C01
MINT1065C4875C01 MINT1065C4875C01 MINT1065C4875C01
MINT1065B1275C01 MINT1065B1275C01 MINT1065B1275C01
PDF Datasheet Preview
MINT1065
65W Single Output Series

Medical & ITE Universal Input Power Supply
•65W Convection Cooled AC-DC Power Supply
•Universal Input 90-264 VAC
•Less than 0.5W No Load Power Dissipation
•Rugged EMC Compliant Design
•2” x 4” x Package
•Approved to EN/IEC/UL60601-1, 2nd Edition
•Approved to EN/IEC/UL60950-1, 2nd Edition
•Meets Efficiency Level IV Efficiency

Compliant LVD, RoHS
•Optional Chassis/Cover
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25C unless otherwise stated.

AC Input 100-240VAC +/- 10%, 47-63 Hz single phase. Input Current 115VAC 0.7A, 230VAC 1.5A. Inrush Current The inrush at 264VAC, at a cold start, will not exceed 40A. Input Fuses F1, F2 2.5A, 250VAC fuses provided on all models. Earth Leakage Current
<300uA 264Vac, 60Hz, normal <500uA SFC. Efficiency Up to 90% typical. Output Power 65W continuous. Ripple and Noise 1% pk-pk max., 20MHz BW, differential mode. Measured with noise probe directly across output terminals. Output Voltage See chart.

Voltage Adjustability Voltage pre-set by fixed resistance. Minimum Load Not required. Total Regulation +/- See chart.

Transient Response
500us max., 50% load step, typical.

Turn On Time Less than 1 second under all rated load conditions.

Hold-up Time <17 ms at 65W, nominal input 120VAC .

Overvoltage Protection Built-in

Overload Protection Hiccup Mode

Short Circuit Protection Hiccup Mode

Switching Frequency Variable 50-75kHz typical.

Medical Safety Standards EN/IEC/UL 60601-1, 2nd Edition, EN/IEC/UL60950-1, 2nd Edition

Isolation Input-Output 4000VAC, Input-Ground 1800VAC, Output-Ground 500VAC

Operating Temperature 0 to 70C derate from full rated power above 40C . Cooling Convection

Output Power Derating See derating chart

Storage Temperature -40 to +85C. Relative Humidity 5% to 95%, non-condensing
1 of 3 SL Power Electronics Corp
• 6050 King Drive Ventura, CA 93003
• Phone
• Fax
• Email


MINT1065
65W Single Output Series

Medical & ITE Universal Input Power Supply

Model Number

MINT1065X1275C01 MINT1065X1375C01 MINT1065X1575C01 MINT1065X1875C01 MINT1065X2075C01 MINT1065X2475C01 MINT1065X4875C01

Volts V
12V 13.2V 15V 18V 20V 24V 48V

Output Parameters

Output Current

Ripple

Open Frame w/cover
& Noise
5.25A 4.80A 4.33A 3.50A 3.25A 2.70A 1.35A
4.00A 3.63A 3.20A 2.66A 2.40A 2.00A 1.00A
120mV 140mV 150mV 180mV 200mV 240mV 480mV
More datasheets: CXA2590-0000-000R0UX440F | CXA2590-0000-000R0UX440H | CXA2590-0000-000R0UX450H | CXA2590-0000-000R0UX240H | CXA2590-0000-000R0UX250H | MINT1065B1875C01 | MINT1065B1575C01 | MINT1065B4875C01 | MINT1065C1275C01 | MINT1065C1575C01


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MINT1065C1875C01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MINT1065C1875C01 506452